Harman Kardon AVR 7550HD Owners Manual - Page 28
STEP FIFTEEN - Turn On the AVR 7550HD
View all Harman Kardon AVR 7550HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
INSTALLATION then type over the current name using the Alphanumeric Keys. Each Alphanumeric Key has the characters available in addition to its number printed above the key. Each press of the key scrolls through the available characters. To move to the next character, either press the 3 Button or press the next desired Alphanumeric Key. Press the OK Button to finish, and the remote will prompt you to rename another key or device, or to exit. STEP FIFTEEN - Turn On the AVR 7550HD Two steps are required the first time you turn on the AVR 7550HD. 1.FlipdowntheFront-PanelDoorandpresstheMainPowerSwitch in. The Power Indicator on the front panel will turn amber, indicating that the AVR is in Standby mode and is ready to be turned on.Normally,youmayleavetheMainPowerSwitchon,even when the receiver is not being used. 2. There are several ways to turn on the AVR from Standby mode. a) Press the Standby/On Switch on the front panel. b) Using the remote, press the AVR Power On Button or any of the Source Selectors. NOTES: •AnytimeyoupressoneoftheSourceSelectorsonthe remote, the remote will switch device modes. To control the receiver, press the AVR Settings Button. Some AVR functions are available in all device modes: Volume Controls (including Mute),AudioEffects,VideoModes,SurroundModes,AVR Settings, Info Settings, Sleep Settings and AVR Power On and Off. •Ifyoudonotseeapicturewithinabout1minute,referto the Video Troubleshooting Tips on page 34. 29