Harman Kardon HKTS 15 Owners Manual

Harman Kardon HKTS 15 Manual

Get Harman Kardon HKTS 15 PDF manuals and user guides View all Harman Kardon HKTS 15 manuals
Add to My Manuals
Save this manual to your list of manuals

Harman Kardon HKTS 15 manual content summary:

  • Harman Kardon HKTS 15 | Owners Manual - Page 1
    HKTS 15 HOME THEATER SPEAKER SYSTEM OWNER'S MANUAL
  • Harman Kardon HKTS 15 | Owners Manual - Page 2
    HKTS 15 HOME THEATER SPEAKER SYSTEM 3 Safety Information 4 Introduction 4 Included 5 SUB-TS15 Subwoofer Amplifier Panel Controls and Connections 7 Speaker Placement 7 Color-Coding System 8 Mounting Options 9 Speaker Connections 9 Speaker-Level Connection Guide 10 Dolby Digital or DTS (
  • Harman Kardon HKTS 15 | Owners Manual - Page 3
    or other hazards. 24. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 25. The product should be mounted to a wall or ceiling only as recommended by the manufacturer. SAFETY
  • Harman Kardon HKTS 15 | Owners Manual - Page 4
    your Harman Kardon dealer. Harman Kardon invented the high-fidelity receiver more than fifty years ago. With state-of-the-art features and time-honored circuit designs, the HKTS 15 is a perfect complement to a Harman Kardon receiver or any home theater system. ■ Complete home theater speaker system
  • Harman Kardon HKTS 15 | Owners Manual - Page 5
    Subwoofer (SUB) Input ¶ Line-Level Full-Range Inputs • Speaker-Level Outputs inefficiency and distortion. Engage this filter when using the Speaker-Level Inputs ª, or when using the Line-Level Full-Range Inputs ¶, unless your receiver will remain on for about 10-15 minutes without a trigger signal. ¢
  • Harman Kardon HKTS 15 | Owners Manual - Page 6
    for that channel, and connect the long end of the adapter to the corresponding line-level input on the SUB-TS15. If your receiver has only a single subwoofer output, you may connect it to either the left or right line-level input on the SUB-TS15, and no Y-adapter is needed. • Speaker-Level Outputs
  • Harman Kardon HKTS 15 | Owners Manual - Page 7
    PLACEMENT Color-Coding System The HKTS 15 uses the channel color-coding system established by the Consumer Electronics Association to make setting up your home theater speaker system as easy as possible. Your system includes a set of colored stickers that may be placed near the speaker terminals of
  • Harman Kardon HKTS 15 | Owners Manual - Page 8
    Remove Stand plate on the wall in the desired location. 15mm or 1/2" If possible, position the speakers so that the mounting screws (not included; use size #8) may be installed directly into a wooden wall stud. If that is not possible, use optional wall anchors that are rated to support
  • Harman Kardon HKTS 15 | Owners Manual - Page 9
    terminal and black for the (-) terminal. Newer Harman Kardon receivers conform to the CEA standard and therefore use a color other than red or black for the (+) terminal to indicate some speaker positions: e.g., surround left. Although the HKTS 15 system has red and black collars on the individual
  • Harman Kardon HKTS 15 | Owners Manual - Page 10
    INSTALLATION METHOD FOR DOLBY DIGITAL, DTS OR OTHER DIGITAL SURROUND PROCESSORS: Use the line-level input jack marked SUB § for the Low-Frequency Effects channel. Connect this jack to the subwoofer output or LFE output on your receiver or amplifier. Connect each speaker to the corresponding speaker
  • Harman Kardon HKTS 15 | Owners Manual - Page 11
    Dolby Pro Logic processors. If your receiver/processor has a built-in lowpass-crossover filter for the subwoofer output, you may use the SUB Input § to bypass the subwoofer's internal crossover. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier. Make sure that
  • Harman Kardon HKTS 15 | Owners Manual - Page 12
    CONNECTIONS Dolby Pro Logic (Non-Digital) - Speaker Level USE THIS INSTALLATION METHOD FOR DOLBY PRO LOGIC APPLICATIONS (NOT DOLBY DIGITAL, DTS OR OTHER DIGITAL PROCESSING), WHERE THE RECEIVER/ PROCESSOR DOES NOT HAVE A SUBWOOFER OUTPUT, OR A VOLUMECONTROLLED PREAMP (LINE-) LEVEL OUTPUT: Connect
  • Harman Kardon HKTS 15 | Owners Manual - Page 13
    speakers, it would be a good idea to check whether they are in phase by flipping this switch. The High-Cut (Low-Pass) Filter Switch ™ limits the frequencies of the audio signal inputted to the subwoofer to the low frequencies that the subwoofer reproduces best. This allows the subwoofer to perform
  • Harman Kardon HKTS 15 | Owners Manual - Page 14
    it has moved: i.e., the speaker that was not working still has no sound and the speaker that was working is still fine. If the problem is in the same place, the source of the problem is most likely with your receiver or amplifier, and you should consult the owner's manual for that product for
  • Harman Kardon HKTS 15 | Owners Manual - Page 15
    15 SPECIFICATIONS HKTS 15 System Frequency Response: 35Hz - 20kHz (-6dB) SAT-TS15 Satellites Recommended Power: 10 - 80 Watts Impedance: 8 Ohms nominal Sensitivity: 86dB @ 1 Watt/1 meter Tweeter: One 1/2" dome, video-shielded Midrange: One 3" driver, video-shielded Dimensions (H x W x D): 6-9/16
  • Harman Kardon HKTS 15 | Owners Manual - Page 16
    250 Crossways Park Drive, Woodbury, New York 11797 516.255.4545 (USA only) Fax: 516.682.3523 © 2006 Harman International Industries, Incorporated. All rights reserved. Part No. 406-000-05503-E Printed 8/06
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
HKTS15
HOME THEATER SPEAKER SYSTEM
OWNER’S MANUAL