Hayward EcoStar Technical Guide - Page 43
Diagnostics - sp3400vsp
View all Hayward EcoStar manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Diagnostics 1. Press the Menu button until the Diagnostic screen appears (fig 83). This menu provides important information about the performance of the pump that can be used during troubleshooting. Below are the different screens and their meaning. These are all real-time displays. Press the „>‟ button to view information. Serial Number 03045433 Drive Rev: 2.2 Display Rev: 1.16 Product Version SP3400VSP Input Voltage Within Range Motor Current 1.1A (0-13.0A) Displays firmware of both drive and display. Also shows "too high" or "too low" Current range shown in ( ) Power Usage 225W (0-2650W) Figure 83 Power usage range shown in ( ) Driver: 78C Heatsink: 67C Com Bus Online (addr: 1) Temperature of heatsink and drive. Status of com link between VSC and Hayward control. Reads offline when not connected Event Log Press + to View By pressing the + button you will see the last 20 error and or trip conditions, as well as the amount of time that has elapsed since the condition occurred. Page 41