Hayward Navigator V-Flex Owners Manual - Page 11

Troubleshooting

Page 11 highlights

MAINTENANCE TIPS "Easy Opening Bottom": For Turbine Access and Inspection Step 1 Step 2 20 TROUBLESHOOTING FOR TECHNICAL ASSISTANCE, CALL: 1300 POOLS 1 PROBLEM CAUSES Lack of/improper water flow through cleaner Slow/no forward movement Blockage of the Cleaner throat Worn shoes Worn wings Improper cleaner model for application Improper shoes for application Lack of/improper water flow through cleaner Cleaner fails to climb vertical walls gunite/ concrete pool Blockage of the Cleaner throat Worn shoes Worn wings Hose too short Improper tension on rear flap Too much/improper water flow through cleaner Improper tension on rear flap Cleaner climbs to water surface and sucks air Steering failure SOLUTION Check water flow with Flow Gauge and adjust as per Step 5 Clear blockage Replace shoes Replace wings Call 1300 POOLS 1 Call 1300 POOLS 1 Check water flow with Flow Gauge and adjust as per Step 5 Clear blockage Replace shoes Replace wings Install additional hose sections per installation instructions. Turn rear flap adjuster to III Check water flow with Flow Gauge and adjust as per Step 5 Turn rear flap adjuster to position 1. If still climbing too much, reduce water flow until proper operation is achieved. 1. Check and clean rear screen 2. Check to see that cone gear is free and rotates smoothly in both directions 3. Check medium turbine and spindle gear assemblies for malfunction 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

20
MAINTENANCE TIPS
“Easy Opening Bottom”: For Turbine
Access and Inspection
Step 1
Step 2
21
TROUBLESHOOTING
FOR TECHNICAL ASSISTANCE, CALL: 1300 POOLS 1
PROBLEM
CAUSES
SOLUTION
Blockage of the Cleaner
throat
Worn shoes
Clear blockage
Replace shoes
Call 1300 POOLS 1
Worn wings
Improper cleaner model
for application
Replace wings
Cleaner fails to climb
vertical walls gunite/
concrete pool
Improper shoes for
application
Lack of/improper water
flow through cleaner
Blockage of the Cleaner
throat
Hose too short
Clear blockage
Install additional hose
sections per installation
instructions.
Improper tension on rear
flap
Turn rear flap adjuster to III
Cleaner climbs to water
surface and sucks air
Too much/improper water
flow through cleaner
Improper tension on rear
flap
Turn rear flap adjuster to
position 1. If still climbing
too much, reduce water
flow until proper operation
is achieved.
Steering failure
Slow/no forward movement
Lack of/improper water
flow through cleaner
Check water flow with Flow
Gauge and adjust as per
Step 5
Check water flow with Flow
Gauge and adjust as per
Step 5
Worn shoes
Replace shoes
Worn wings
Replace wings
Check water flow with Flow
Gauge and adjust as per
Step 5
1. Check and clean rear
screen
2. Check to see that cone
gear is free and rotates
smoothly in both
directions
3. Check medium
turbine and spindle
gear assemblies for
malfunction
Call 1300 POOLS 1