Hayward Pool Vac Pool Vac Classic - Page 13
Pool Vac XL
View all Hayward Pool Vac manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Pool Vac XL MAINTENANCE TIPS 5. POOL VAC XL SKIRT/MID SECTION REPLACEMENT: Replacement of the Pool Vac XL Skirt/Mid Section is not recommended as DIY repair. There is strong possibility that the replacement could cause propulsion system issues. It is strongly suggested that you bring your Pool Vac XL to a HAYWARD dealer for replacement. Tools required - #2 Phillips screwdriv8er 7 6 1/8" flat screwdriver Preliminary steps - Turn off pool pump Remove PoDol Vac XL from pool Disconnect suction hose from cleaner Change out steps - 1 1 2 1. Insert the 1/8" flat screwdriver into each slot in the handle and pry each cover snap off the handle. 3 C 2. Using the phillips screwdriver, remove and retain the four screws holding the Handle onto the Middle Body. 3. Lift the Handle off the Middle Body. 4 4. Lift the old Skirt/Middle Body assembly off the Main Drive Assembly B 5. Set the new Skirt/Middle Body assembly onto the Main Drive Assy. 6. Replace the Handle. 7. Reattach the Handle by screwing in the four screws previously removed. A 8. Engage the Top Cover rear hooks under the top rear retainers in the Middle Body. Rotate the Top Cover down in front. Insure the snaps are aligned inside the front of the Handle and pu8 sh the Top 7 6 Cover down until it snaps into the Handle. 11