Hayward Variable Speed Pump Owners Manual - Page 22

16. +- Use + to reset to factory default settings Reset all parameters Use > to skip reset + for yes; > to skip 17. Are you sure? + for yes; - for no +- Confirm reset of all parameters Move to next menu item 18. Use Timers Menu to set timeclocks. 6.7. Timer Menu Screen 1. Timer Menu Press > to enter Buttons Used Comments Use > to enter Timer Menu 2. Timer 1 1725rpm 12:00a to 11:45p 3. Press + to change; Press > next timer +- Use + to change displayed timer Use > to skip to next timer 4. T1: Timer 1 +- Use + to rename timer +/- rename; speed > Use > to set motor speed for timer 5. Timer 1 1725rpm +- Use to set speed for timer +/- adjust; times > Use > to set start/stop time 6. Timer 1 1725rpm 8:00a to 6:00p +- Use to set start/stop time for timer Use > to choose days of operation for timer 7. Choose Days +- Use to chose days of operation for timer 7D 7 days a week > Move to next menu item Note: When start/stop times are set to be the same, the timer is deactivated. Each timer can be set to run on specific days of the week. Options are to run 7 days per week, 5 days per week (Monday thru Friday), or on a single day (Monday thru Sunday). Each timer is set up in this same manner. When the pump is powered and the timers are set up, the Timers Active LED will illuminate. If the timers are set up such that their run times overlap, the timers will run in priority from Timer 1 to Timer 8. In other words, if Timer 1 is set to run from 8:00 am to 12:00 pm, and Timer 2 is set to run from 10:00 am to 2:00 pm, the pump will run Timer 1 from 8:00 am to 12:00 pm, and will then switch to run Timer 2 until 2:00 pm. Default setting for Timer 1 is to start at 12:00 am, and end at 11:45 pm. Page 22 of 36 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS EcoStar Variable Speed Pump IS3401VSP Rev-2