HealthRider 8.5 Ex Crosstrainer El Elliptical English Manual - Page 9
a Wave Washer 98. Slide the Wave Washer
View all HealthRider 8.5 Ex Crosstrainer El Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. Attach Inner and Outer Handlebar Covers (18, 8 19) around the Left Handlebar (8) with three M4 x 16mm Self-tapping Screws (79) and an M4 x 13mm Washer (93). Start all three Self-tapping Screws before tightening any of them. Repeat this step for the Right Handlebar (not shown). 19 79 8 18 93 79 9. Apply a generous amount of grease to the 9 Pivot Axle (65), and insert the Pivot Axle into the Frame (2). Attach each Frame Cover (17) to the Frame (2) with two M4 x 16mm Screws (86). 2 Grease 65 17 17 86 10. Apply a small amount of grease to both sides of a Wave Washer (98). Slide the Wave Washer 10 onto the left end of the Pivot Axle (65). Next, slide the Left Handlebar (8) onto the Pivot Axle 9 as shown. Attach the Left Handlebar with an M10 x 23mm Shoulder Screw (80) and an M10 x 20mm x 1mm Washer (81). 8 98 Repeat this step for the Right Handlebar (9). 81 80 65 Grease 9