HealthRider Softstrider 225p Treadmill Uk Manual - Page 6

ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and wire cutters . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Extension Leg Screw (108)-2 Handrail Screw (53)-2 WARNING: Do not plug in the power 1 cord until the treadmill is completely assembled. 1. With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown. Insert one of the Extension Legs (34) into the treadmill as shown. (Note: It may be helpful to tip the Uprights [11] in the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is underneath the Extension Leg. Attach the Extension Leg with an Extension Leg Screw (108); push on the head of the Extension Leg Screw whilst tightening it. Attach the other Extension Leg (34) in the same way. 2. Insert a Handrail (1) into the tube at the upper end of the right Upright (11). Have a second person hold the 2 Handrail whilst you complete step 3. Long Screw (3)-6 11 11 108 34 40 11 1 6