HP 10/100 3Com 3c905C-TX HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use
HP 10/100 3Com 3c905C-TX Manual
View all HP 10/100 3Com 3c905C-TX manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 10/100 3Com 3c905C-TX manual content summary:
- HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 1
HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters User Guide Part Number 519430-004 December 2010 (Fou rth Edition) - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 2
of Microsoft Corporation. Intended audience This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energ y levels. - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 3
...20 Known issues...20 Using a diagnostic monitor for troubleshooting 20 Target connection problems ...20 Target login problems ...21 Boot problems...21 LUN access problems...21 OS problems ...21 Technical support...23 Before you contact HP...23 HP contact information ...23 Acronyms - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 4
on this feature, see the HP ProLiant Accelerated iSCSI for Windows User Guide. Limitations • A system crash might result if you bring down a Dynamic Host Configuration Protocol, Internet Storage Name Service, and Service Location P rotocol are not supported on iSCSI boot installs or during the - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 5
Server Adapter o HP NC380T PCI Exp ress Dual Port Multifunction Gigabit Server Adapter • Targets. All M icrosoft certified iSCSI targets are supported, including the following HP controllers and storage systems: o HP StorageWorks 1510i Modular Smart Array o HP StorageWorks All in One M odular - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 6
Installation and configuration Downloading the SoftPaq 1. Go to the HP website (http://www.hp.com/#Support). 2. Click Support & Drivers. 3. Select Download drivers and software (and firmware). 4. Type the adapter name in the For product box, and then click Go. 5. Select an operating system. 6. - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 7
Variable name TargetName TargetIP TargetPort TargetIP2 TargetPort2 InitiatorName InitiatorNetmask InitiatorRoute LAA LUN AuthMethod CHAPUsername Descr ipti on Exam ple Name of the target from which to boot TargetName=iqn.200305.com.hp1510i:disk01 Target IP in aaa.bbb.ccc.ddd TargetIP=10.10.10. - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 8
hard ForceBoot=False drive C:\ (if present), regardless of ROM-based setup utilities (RBSU) controller order. Set to False for servers that support the network adapter in the RBSU controller order menu. UseBIOSInterface Set to True for Windows 2003 installation. Set to False for Linux - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 9
. Must match what the target offers. # Hard coded Target IP .. No DNS support # TargetName=iqn.2003-05.com.hp1510i:disk01 TargetIP=10.10.10.13 TargetIP2=10. to the Target # and local IP settings. No DNS or DHCP support # InitiatorName=iqn.client01 InitiatorIP=10.10.10.02 InitiatorNetmask=255.255.255 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 10
boot device. Enable iSCSI boot for HP network adapters For embedded adapters and mezzanine adapters, the firmware update utility installs the option ROM on all supported adapters. The iSCSI boot option ROM is installed but disabled. Installation and configuration 10 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 11
iSCSI boot option ROM must be enabled before it can be used. Do not enable iSCSI b oot on more than two adapters because option ROM space is limited. The following sections describe procedures to enable iSCSI boot for embedded adapters, standup adapters, and mezzanine adapters. 1. Enable iSCSI boot - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 12
listed first. d. Press escape to exit RBSU. If the network adapter does not appear in the Boot Controller Order list, you r System ROM d oes not support this feature. If the System ROM is up to date, it is necessary to override the Boot Controller Order list b y setting EV parameter "ForceBoot=True - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 13
peimg /inf=. HPNicUpdate\drivers\bxois.inf/image=. \HPNicUpdate\MountPoint\Windows 12. Save the changes to the WIM using the following command: imagex/unmount/commit.\HPNicUpdate\MountPoint 13. Replace the original sources\boot.wim image (located in the W2K8 DVD f older you created in an earlier - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 14
SP2 installation CD b y creating a slipstream version that includes the Microsoft Storport hotfix KB943295 (http://support.microsoft.com/kb/943295). See the Microsoft KB article KB814847 (http://support.microsoft.com/kb /814847) for details about how to create a M icrosoft slipstream CD. 4. Insert - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 15
5. Select drivers from the disk 1 and disk 2 diskettes when prompted. DO NOT insert d isk 1 into drive A until prompted. After disk 1 is inserted, the following window appears. 6. Select Specify Additional Device. The following window appears. Installation and configuration 15 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 16
7. Press Enter to continue. The following window appears. 8. Complete the f ollowing steps to install the first three files. a. Select Install 1st: MS Windows wdfldr and then press Enter. b. Select Install 2nd: HP Windows wdf01000 and then press Enter. c. Select Install 3rd: HP NC37x/NC380 Virtual - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 17
10. Press Enter to install the 4th file: HP iSCSI HBA Driver. 11. A Windows setup screen shows the iSCSI Target. Installation and configuration 17 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 18
12. Windows formats the iSCSI target and then begins copying files to the iSCSI target. During this phase a secondary setup may appear prompting for d isk 1 and disk 2 again. 13. If the following window appears, insert disk 1 and press Enter. 14. If the following window appears, insert disk 2 and - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 19
has been created during the deployment phase. Continue to set up crash dump. 3. Complete the installation and reboot when prompted. Set up crash dump support The HP iSCSI crash dump driver provides a mechanism for an HP iSCSI Booted system to capture data for analysis when a Windows 2003 OS System - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 20
the first splash screen. • Multipath I/O (MPIO) is not supported for failover for boot filesystem because MPIO drivers cannot be added for troubleshooting If the client is not able to b oot f rom the target server and the problem is not service is not running on the target server Troubleshooting 20 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 21
so on. • Verif y the Option ROM configuration setting "Boot to iSCSI" is set to Enabled. LUN access problems Symptoms: The initiator is able to connect to and log in to the ta rget, but the system doesn't to allow access to the specified LUN by the initiator OS problems Symptoms: Troubleshooting 21 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 22
boot (some targets start numbering data devices at 1 not 0) • The target is not conf igured to allow access to the specified LUN by the initiator Troubleshooting 22 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 23
hp.com /c ountr y/us/en /ww contac t.html). For HP technical support: • In the United States, for contact options see the Contact HP calls may be recorded or monitored. o If you have purchased a Ca re Pack (service upgrade), call 1-800-633-3600. For more information about Care Packs, refer to the - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 24
Acronyms and abbreviations BSOD blue screen of death CHAP Challenge Handshake Authentication Protocol DHCP Dynamic Host Conf iguration Protocol HBA host bus adapter iLO Integrated Lights-Out iLO 2 Integrated Lights-Out 2 IPL initial program load iSCSI Internet Small Computer System Interface LAA - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 25
RBSU ROM-Based Setup Utility RILOE Remote Insight Lights-Out Edition SAN storage area network UNDI Universal Network Driver Interface VLAN virtual local-area network WIM Windows Imaging file format Acronyms and abbreviations 25 - HP 10/100 3Com 3c905C-TX | HP Broadcom iSCSI Boot for NC37xx/NC380x Adapters Use - Page 26
19 support 23 supported adapters 4 supported operating systems 4 supported servers 4, 6, 12, 19, 20, 21 supported targets 4, 6, 12, 19, 20, 21 system requirements 4 T target connection problems 20 target installs 13 target login problems 21 teaming limitations 4 technical support 23 troubleshooting
HP Broadcom iSCSI Boot for NC37xx/NC380x
Adapters
User Guide
Part Number 519430-004
December 2010 (Fourth Edition)