HP 1100xi HP PCL/PJL reference - PCL 5 Comparison Guide - Page 157
HP LaserJet 8000 Series Printers, Selecting Paper Source, Size, Advance Full HP-GL/2 Command
View all HP 1100xi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
HP LaserJet 8000 Series Printers The HP LaserJet 8000 is a 24-ppm printer with 600 dpi support in PCL 5 (the printer offers 1200 dpi in PCL 6). It has built-in mopy capability, which is enabled when at least 16 Mb of memory or a disk drive are installed. The LaserJet 8000 series printers are direct replacements for the LaserJet 5Si, LaserJet 5SiMx, and LaserJet 5Si Mopier printers. They support the same PCL 5 commands and options, except as described below. The LaserJet 8000 series printers use the same PCL 5 implementation as found in the LaserJet 4000 series, and support exactly the same PCL 5 and HP-GL/2 commands as the LaserJet 4000 series. They support the same options to the PCL 5 command set, with the exceptions listed below. Selecting Paper Source The HP LaserJet 8000 series printers support the same option set as the LaserJet 5Si printer. This is a superset of what the LaserJet 4000 series supports. Page Size The LaserJet 8000 series printers do not support ledger, A3, or JIS B4 paper. It does support A5 paper, which the 5Si did not support. Advance Full Page HP-GL/2 Command The LaserJet 8000 series supports the HP-GL/2 Advance Full Page command (PG). The LaserJet 5Si printer does not support this command. ENWW Printer-Specific Differences 2-109