HP 1120NR HP Mini 1000 NetBook - Maintenance and Service Guide - Page 53
that secure the actuators for the power switch, was disconnected earlier see
UPC - 884420800767
View all HP 1120NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. Disconnect the following cables from the system board: (1) Speaker cables (2) Microphone cable (3) Fan cable (4) Display panel cable NOTE: The USB board pass-through cable (5) was disconnected earlier (see Mass storage devices on page 35). 3. Remove the two silver Phillips PM2.0×3.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board, and then remove the actuators (2). NOTE: The actuators are included in the Bracket Kit, spare part number 507318-001. Component replacement procedures 45
2.
Disconnect the following cables from the system board:
(1)
Speaker cables
(2)
Microphone cable
(3)
Fan cable
(4)
Display panel cable
NOTE:
The USB board pass-through cable
(5)
was disconnected earlier (see
Mass storage
devices
on page
35
).
3.
Remove the two silver Phillips PM2.0×3.0 screws
(1)
that secure the actuators for the power switch
and wireless on/off switch to the system board, and then remove the actuators
(2)
.
NOTE:
The actuators are included in the Bracket Kit, spare part number 507318-001.
Component replacement procedures
45