HP 1200 HP LaserJet 1200 and 1200se Printers - Getting Started Guide - Page 6

(QJOLVK   1 2 1) Place the media into the media input tray. Slide the guides until they are flush with the media. 2) Install the printer priority media input tray. 3) Connect the power cord. (220V models only: Turn on the switch.) Test the printer. Wait until the ready light is illuminated and press the Go button. A configuration page, showing the printer's current configuration, should print in 10 seconds. If a configuration page does not print, go to Step 15. Refer to the electronic user guide on the CD for more information. 1) 2) 3) 220V 10 15   (QJOLVK Install the printer software. Insert the CD for your software installation or go to the Plug and Play section. Installing on Windows. 1) Select Software Installation from the autorun screen. If autorun does not occur, select Start, select Run, and type x:\setup (where x is the letter of your CD-ROM drive). Windows . 1) x:\setup x CD-ROM