HP 166207-B21 Advanced Data Guarding Option Software Reference Guide - Page 14

System Setup This action opens ACU-XE, the browser-based version of the Compaq Array Configuration Utility (ACU). IMPORTANT: Use the version of ACU-XE that is provided on the CD. The software key cannot be installed using versions of ACU-XE earlier than 1.40, nor can it be installed using ACU. 7. When the utility has loaded, select the controller that is to be used to configure RAID ADG. 8. Select License Key Management. 9. Select Enter License Key. 10. Enter the 25-character software key (provided on the CD sleeve) and click Submit. If you wish, you may now configure the controller using ACU-XE. 11. Exit ACU-XE, remove the CD, and reboot the server. For further instructions or clarifications regarding the software key installation procedure, refer to the ACU-XE online help. After you have enabled RAID ADG (whether by software key or hardware enabler module), you can configure the array controller. This can be achieved using either ACU or ACU-XE; both are equally suitable. Most of the configuration instructions described in the remaining sections of this chapter assume that you are using ACU. NOTE: For more detailed information about ACU, refer to the user guide provided with the array controller. For more detailed information about ACU-XE, refer to the Array Configuration Utility XE User Guide that is provided in the RAID ADG option software kit. If you decide to use ACU, check that the latest version is installed on the system before beginning any configuration procedure: 1. Refer to www.compaq.com and locate the page containing the current ACU file. 2. Note the version number of this file. 3. Compare this version number with that of the ACU file that is already installed on the system. 4. Download the newer version and install it on the system, if necessary. 2-2 Compaq Advanced Data Guarding Option Software Reference Guide