HP 166207-B21 Advanced Data Guarding User Guide - Page 14
Installing the RAID ADG Enabler Module
UPC - 720591292225
View all HP 166207-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation 2-3 Figure 2-2. Aligning the module on the controller board Installing the RAID ADG Enabler Module To install the RAID ADG Enabler Module: 1. Perform the preliminary steps described earlier in this chapter. 2. Ensure that the Array Accelerator on your Smart Array 5300 controller has at least 64 MB of read/write cache. 3. Hold the module at an angle and insert the rear end of the module into the appropriate slot 1. 1 2 a b Figure 2-3. Installing the module
Installation
2-3
Figure 2-2.
Aligning the module on the controller board
Installing the RAID ADG Enabler Module
To install the RAID ADG Enabler Module:
1.
Perform the preliminary steps described earlier in this chapter.
2.
Ensure that the Array Accelerator on your Smart Array 5300 controller
has at least 64 MB of read/write cache.
3.
Hold the module at an angle and insert the rear end of the module into
the appropriate slot
1
.
1
2
b
a
Figure 2-3.
Installing the module