HP 2000-2a20CA HP 2000 Notebook PC and Compaq CQ58 Notebook PC - Maintenance a - Page 66
Keyboard, Remove the keyboard
View all HP 2000-2a20CA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Keyboard NOTE: The keyboard spare part kit includes a keyboard cable. Description Keyboard for use with French Canada NOTE: For a detailed list of keyboard spare parts, see Sequential part number listing on page 25. Spare part number 698694-xx1 Before removing the keyboard, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 39). 5. Remove the memory module/wireless module compartment cover (see WLAN module on page 48). 6. Remove the hard drive compartment cover (see Hard drive on page 53). Remove the keyboard: 1. Remove the Phillips PM2.5×6.0 screw that secures the keyboard to the computer just below the WLAN module slot. 2. Rest and secure the computer on its left side with the bottom toward you, and then partially open the computer. 3. Using a flat-bladed screwdriver or similar tool, push the tabs of the three keyboard clips (1) that are visible inside the battery bay towards the rear of the computer to loosen the keyboard. 58 Chapter 4 Removal and replacement procedures ENWW