HP 2000-2b10NR HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Compaq Pre - Page 68
Power button board, To remove the power button board
View all HP 2000-2b10NR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Power button board Description Power button board (includes cable) Spare part number 685098-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: ● Memory module/wireless module compartment cover (see WLAN module on page 42) ● Hard drive (see Hard drive on page 47) ● Keyboard (see Keyboard on page 53) ● Top cover (see Top cover on page 57) To remove the power button board: 1. Turn the top cover upside down with the front toward you. 2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the power button board to the top cover. 3. Remove the Mylar sheet covering the power button board (2). Component replacement procedures 61