HP 2000fc HP StorageWorks Power and Cooling Module Replacement Instructions (4 - Page 1
HP 2000fc Manual
View all HP 2000fc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HP StorageWorks Power and Cooling Module Replacement Instructions This document details procedures for replacing a failed power and cooling module in an HP StorageWorks enclosure. About this document • Illustrations in this document may show modules or an enclosure that differ slightly from the devices in your environment. • The Storage Management Utility (SMU) and the Command Line Interface (CLI) can be used to manage the storage enclosure. Tasks in this document demonstrate using the SMU. • For the latest product documentation, see the HP website at http:// www.hp.com/support/manuals. Under the storage banner, navigate to the page for your storage enclosure. • Warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. To obtain a copy of the warranty for this product, see the warranty information website: http:// www.hp.com/ go/storagewarranty. Before you begin Observe the following: © Copyright 2009 Hewlett-Packard Development Company, L.P. First edition: November 2009 The information in this document is subject to change without notice. Printed in the US www.hp.com CAUTION: • Removing a module from an operational enclosure significantly changes air flow within the enclosure. Openings must be populated for the enclosure to cool properly. Leave modules in the enclosure until a replacement is available. • Parts can be damaged by electrostatic discharge; use proper anti-static protection. Keep parts in electrostatic containers until needed and ensure you are properly grounded when touching static-sensitive components. NOTE: Port-colored (purple) latches on modules mean the module is hot-swappable. It can be replaced without having to power down the system. NOTE: This power and cooling module may be used as a replacement for a variety of power and cooling modules, including modules with an on/off switch. *481595-002* Page 1