HP 2211x 2011x/2011s/2011xi 2211f/2211x 2311cm/2311f/2311x/2311xi 2511x 2711x - Page 25
Using the On-Screen Display OSD, Main Menu Options, Description
View all HP 2211x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Icon Main Menu Options Image Control Sub-menu Options Auto-Adjustment Clock Clock Phase Horizontal Position Vertical Position Custom Scaling OSD Control Sharpness OverDrive (select models) Dynamic Contrast Ratio Horizontal OSD Position Description Adjusts the screen image. Automatically adjust the screen image. NOTE: This item can only be used with a VGA input signal. Minimizes any vertical bars or strips visible on the screen background. Adjusting the Clock also changes the horizontal screen image (VGA input only). Adjusts the focus of the display. This adjustment allows you to remove horizontal noise, and clear or sharpen the image of characters (VGA input only). Adjusts the position of the screen image left and right. Adjusts the position of the screen image up and down. Selects the method for formatting information displayed on the monitor. Select: ● Fill to Screen - image fills the entire screen and might look distorted or elongated because of non-proportional scaling of height and width. ● Fill to Aspect Ratio - image is sized to fit the screen and maintains proportional image. Adjusts the screen image to look sharper or softer. Turns OverDrive on or off. The factory default is Off. Sets the DCR setting on or off. The factory default setting is off. DCR automatically adjusts the balance between white and black levels to provide you with an optimal image. Adjusts the position of the OSD menu on the screen. Changes the viewing position of the OSD menu to the left or right area of the screen. Using the On-Screen Display (OSD) 19