HP 2500L HP Jetdirect Print Servers - Administrator Guide - Page 206
Example 1, specified: PCL, PostScript, HP-GL/2, or ASCII.
UPC - 088698478295
View all HP 2500L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
7. If the test file prints but is formatted incorrectly, do the following: I Check :rp tag in printcap file. Example 1 (suggested name for an ASCII or text printer): text | lj1_text:\ :lp=:\ :rm=laserjet1:\ :rp=text:\ :lf=/usr/spool/lpd/ERRORLOG:\ :sd=/usr/spool/lpd/lj1_text: Example 2 (suggested name for PostScript, PCL, or HP-GL/2 printers): raw | lj1_raw:\ :lp=:\ :rm=laserjet:\ :rp=raw:\ :lf=/usr/spool/lpd/ERRORLOG:\ :sd=/usr/spool/lpd/lj1_raw: 8. Check that the printer is set up to print the type of test file you specified: PCL, PostScript, HP-GL/2, or ASCII. 9. Check whether the printer was turned off or lost its LAN connection in the middle of a print job. LPD queues may become disabled or stop sending data if the printer is powered off or if the LAN connection is broken when the printer is in the middle of printing a job. (Example: power is turned off to fix a paper jam.) Use the HP-UX command lpstat -Pqname to find out if the queue has been disabled after the printer has powered up again or the connection is reestablished. The disabled queue can be restarted using the following command: HP-UX: enable qname ENWW Troubleshooting the HP Jetdirect Print Server 206