HP 2530p HP EliteBook 2530p Notebook PC - Maintenance and Service Guide - Page 74
LED board, Switch cover see
UPC - 884962204115
View all HP 2530p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
LED board Description LED board (includes cable and Mylar cover) Spare part number 499209-001 Before removing the LED board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the following components: a. Primary hard drive (see Primary hard drive on page 55) b. Optical drive (see Optical drive on page 60) or Secondary hard drive (see Secondary hard drive on page 68) c. Switch cover (see Switch cover and keyboard on page 62) Remove the LED board: Peel the LED board away from the switch cover to remove it. NOTE: The LED board cable is included with the LED board and is also available in the Cables Kit, spare part number 492555-001. Reverse the above procedure to install the LED board. 66 Chapter 4 Removal and replacement procedures