HP 2710p Memory Modules - Windows Vista - Page 9

To prevent damage to the memory module, be sure that you do not bend the, of the memory module

Get HP 2710p - Compaq Business Notebook PDF manuals and user guides
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

NOTE: If you are inserting a memory module and both memory module slots are vacant, be sure that you insert the memory module into the primary memory module slot. a. Align the notched edge (1) of the memory module with the tab in the memory module slot. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. With the memory module at a 45-degree angle from the surface of the memory module compartment, press the module (2) into the memory module slot until it is seated. c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. CAUTION: To prevent damage to the memory module, be sure that you do not bend the memory module. 11. Align the tabs (1) on the memory module compartment cover with the notches on the computer. 12. Close the cover (2). 13. Tighten the 6 memory module compartment screws (3). 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
NOTE:
If you are inserting a memory module and both memory module slots are vacant, be sure
that you insert the memory module into the primary memory module slot.
a.
Align the notched edge
(1)
of the memory module with the tab in the memory module slot.
CAUTION:
To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.
With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module
(2)
into the memory module slot until it is seated.
c.
Gently press the memory module
(3)
down, applying pressure to both the left and right edges
of the memory module, until the retention clips snap into place.
CAUTION:
To prevent damage to the memory module, be sure that you do not bend the
memory module.
11.
Align the tabs
(1)
on the memory module compartment cover with the notches on the computer.
12.
Close the cover
(2)
.
13.
Tighten the 6 memory module compartment screws
(3)
.
3