HP 2710p Memory Modules - Windows XP - Page 8

CAUTION, and gently pull the module out of the memory

Get HP 2710p - Compaq Business Notebook PDF manuals and user guides
UPC - 884420088295
View all HP 2710p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

5. Turn the computer upside down on a flat surface. 6. Remove the battery from the computer. 7. Loosen the 6 memory module compartment screws (1). 8. Lift the memory module compartment cover (2) away from the computer. 9. If you are replacing a memory module, remove the existing memory module: a. Pull away the retention clips (1) on each side of the memory module. The memory module tilts up. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. b. Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 10. Insert a new memory module: 2 Chapter 1 Adding or replacing a memory module

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
5.
Turn the computer upside down on a flat surface.
6.
Remove the battery from the computer.
7.
Loosen the 6 memory module compartment screws
(1)
.
8.
Lift the memory module compartment cover
(2)
away from the computer.
9.
If you are replacing a memory module, remove the existing memory module:
a.
Pull away the retention clips
(1)
on each side of the memory module.
The memory module tilts up.
CAUTION:
To prevent damage to the memory module, hold the memory module by the
edges only. Do not touch the components on the memory module.
b.
Grasp the edge of the memory module
(2)
, and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
10.
Insert a new memory module:
2
Chapter 1
Adding or replacing a memory module