HP 3200se HP LaserJet 3200 All-in-One Product - (English for Australia) Gettin - Page 12
If you chose the standalone installation, If you chose network connection or direct, connection
View all HP 3200se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Note If you chose the standalone installation: There are no computer or network requirements; skip the remainder of this section and continue to "Checking the contents of the box" on page 12. If you chose network connection or direct connection: All of the computers that will use the product software must be PCcompatible computers that meet the following minimum requirements: l 486 33 MHz processor or better (or a Pentium 90 MHz processor or better for Microsoft Windows NT 4.0 or Windows 2000) l Windows 95, 98, 2000, 2000 Millennium Edition, or NT 4.0 operating system l 32 MB or more of RAM for Windows 95 or 98; 64 MB or more of RAM for Windows 2000, or NT 4.0 l 175 MB or more of free hard-disk space For a direct connection, the computer should have USB port or a dedicated IEEE-1284 bidirectional or ECP-compliant parallel port available. If the parallel port has another device attached to it, such as an external storage device, that device must be disconnected. If you chose network connection: In addition to having the network computers meet the requirements shown above, you must have the following: l An installed network that uses the TCP/IP or the IPX/SPX network protocol. l An appropriate cable for the type of network connection. The cable is used to connect the print server to a network jack, and is not included with the product. If you do not know what type of cable you need, ask the person who installed the network. 10 Chapter 1 - Introduction EN