HP 3200se HP LaserJet 3200 Series Product - Getting Started Guide - Page 11
Check your work #3, A supported HP JetDirect Print Server not included. Your choice - firmware
View all HP 3200se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Note l A supported HP JetDirect Print Server (not included). Your choice of print server depends on the type of network connection you have and the number of devices you want to connect to the print server. • HP JetDirect 70X (J4155A) for a Home PNA network. • HP JetDirect 170X (J3258B - J3258A is not supported) for a 10Base-T network connection, if you only need to connect the product to this print server. • HP JetDirect 300X (J3263) with a firmware revision of H.08.00 or higher* for a 10Base-T or 10/100Base-TX network connection, if you only need to connect the product to this print server. • HP JetDirect 500X (J3265) with a firmware revision of J.08.00 or higher* for a BNC, 10Base-T, or 10/100Base-TX network connection, if you need to connect the product and up to two other devices to this print server. • HP JetDirect 500X (J3264) with a firmware revision of J.08.00 or higher* for a Token Ring network connection. You can connect the product and up to two other devices to this print server. *You can check the firmware revision number by printing a configuration page for the print server. Instructions for printing the configuration page appear later in this guide. HP recommends against using HP JetDirect Print Servers that are older than the print servers listed above. Check your work #3 Does your computer or network meet the requirements? EN Setup requirements 11