HP 349239-B21 Hot-Pluggable SAS and SATA Hard Drive Installation Instructions
HP 349239-B21 - 250 GB Hard Drive Manual
UPC - 808736769419
View all HP 349239-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 349239-B21 manual content summary:
- HP 349239-B21 | Hot-Pluggable SAS and SATA Hard Drive Installation Instructions - Page 1
branded or Compaq branded hard drives, such as Hard Drive Compatibility tables, Important cards, and updated installation instructions, refer to the Technical Information area on the HP website at http://www.hp.com/products/harddiskdrives. Availability of Japanese documentation To view or download - HP 349239-B21 | Hot-Pluggable SAS and SATA Hard Drive Installation Instructions - Page 2
2. Remove the failed hard drive from the disk enclosure before installing a new hard drive. a. Press the ejector button, and pivot the lever to the full open position. b. Pull the drive from the disk enclosure. 5. When the drive has been fully inserted, close the ejector lever. The locking hinge
HP Hot-Pluggable
SAS and SATA
Hard Drive
Installation Instructions
for HP ProLiant Servers
Read instructions completely before beginning
installation procedure.
© Copyright 2004, 2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical
or editorial errors or omissions contained herein.
Second Edition (February 2005)
Part Number 370802-002
Additional information
For the latest information and instructions regarding HP branded or
Compaq branded hard drives, such as Hard Drive Compatibility
tables, Important cards, and updated installation instructions, refer
to the Technical Information area on the HP website at
.
Availability of Japanese
documentation
To view or download Japanese versions of HP hard drive
documentation, go to
.
To order a hard copy of the HP hard drive documentation in
Japanese, please contact the HP Japan Customer Care Center and
provide them with a hard drive kit number and a serial number.
HP Japan Customer Care Center: 0120-014121
Installation overview
1.
Review guidelines—When replacing a failed drive, refer to the
documentation included with the server or disk enclosure
system to identify and remove a failed drive.
2.
Remove the failed drive—Follow the steps shown on this card.
3.
Install the hot-pluggable hard drive—Follow the steps shown
on this card.
4.
Follow all hard drive handling precautions—Hard drives are
sensitive electromechanical devices that can be permanently
damaged through improper handling. The packaging provided
with a hard drive is designed to protect it from accidental
drops. HP recommends that hard drives remain in their original
packaging until installation. Drives should be handled with care
and never dropped, even from short distances.
CAUTION:
Electrostatic discharge can damage electronic
components. Be sure you are properly grounded before beginning
this procedure. Refer to the documentation that came with your
computer or contact your HP authorized reseller for procedures to
discharge static electricity.
Installing the hard drive
Follow these steps to install a hot-pluggable hard drive in a system.
If you are removing the blank drive bezel, begin with step 1. If you
are removing a failed drive, begin with step 2.
1.
Remove the blank drive bezel from the disk enclosure before
installing a new hard drive.
a.
Press the ejector buttons simultaneously.
b.
Pull the blank drive bezel from the disk enclosure.