HP 3500 HP Color LaserJet 3500 and 3700 Series Printers - User Guide - Page 45
Auto Sense Mode, Restore Color Values - ink
View all HP 3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Menu item ADJUST COLOR SET REGISTRATION AUTO SENSE MODE INK TRANSPARENCY FUSER MODES Values CYAN DENSITY MAGENTA DENSITY YELLOW DENSITY BLACK DENSITY RESTORE COLOR VALUES PRINT TEST PAGE Source ADJUST TRAY 1 ADJUST TRAY 2 ADJUST TRAY 3 EXPANDED SENSING TRANSPARENCY ONLY REJECT-GUARD FUSER ACCEPT-NOT ADVISED A list of available modes appears. Description Allows you to modify the half tone settings for each color. The default for each color is 0. Allows 1-sided and 2-sided image alignment. The default for Source is TRAY 2. The default for the sub-items ADJUST TRAY 1, ADJUST TRAY 2, and ADJUST TRAY 3 is 0. If a tray is configured to PLAIN or ANY SIZE, and the print job does not specify the media type, the printer will adjust the print quality for the type of print media it senses. The default is EXPANDED SENSING, which senses transparencies, glossy paper, and tough paper. REJECT-GUARD FUSER stops the print job when a noncompatible transparency is detected. This option protects the printer fuser from damage. ACCEPT-NOT ADVISED allows the job to print normally even though a non-compatible transparency is being used. The default value is REJECTGUARD FUSER. Allows you to associate each paper type with a specific print mode. ENWW Configure device menu 33