HP 3700 HP Jetdirect Print Servers - Administrator Guide - Page 282
Table C.1, HP Jetdirect Classic Control Panel Menu 6 of 6, The HP Jetdirect Control Panel Menu 282
UPC - 808736551106
View all HP 3700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 282 highlights
Table C.1 HP Jetdirect Classic Control Panel Menu (6 of 6) Menu Item CFG LINK= WEB= SECURITY= Description (10/100Base-TX print servers only) Selects whether you want to manually configure the HP Jetdirect print server's network link. NO (default): Bypass the link configuration menu items. YES: Access the link configuration menu items. For 10/100Base-TX networks, the link speed and communication mode must match the network. One of the following link configurations can be set: AUTO (default): The print server will automatically configure itself to match the network's link speed and communication mode. If it fails, 100TX Half will be set. 10T HALF: 10Mbps, half-duplex operation 10T FULL: 10 Mbps, full-duplex operation 100TX HALF: 100 Mbps, half-duplex operation 100TX FULL: 100 Mbps, full-duplex operation For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTP/HTTPS: Access using either HTTP or HTTPS is permitted. Specify whether the current security settings on the print server will be saved or reset to factory defaults. KEEP (default): The current security settings are maintained. RESET: Security settings are reset to factory defaults. ENWW The HP Jetdirect Control Panel Menu 282