HP 3PAR StoreServ 7200 2-node HP 3PAR Command Line Interface Reference (OS 3.1
HP 3PAR StoreServ 7200 2-node Manual
View all HP 3PAR StoreServ 7200 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 3PAR StoreServ 7200 2-node manual content summary:
- HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 1
HP 3PAR Command Line Interface Reference HP 3PAR OS 3.1.2 Abstract This reference describes the HP 3PAR Command Line Interface (CLI) commands that are used to administer and maintain the HP 3PAR storage system. HP Part Number: QL226-97016 Published: June 2013 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 2
L.P. Confidential computer software. Valid license from HP required for possession, use or copying. HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 3
21 LDAP Management Commands 22 Licensing Management Commands 22 Node Subsystem Management Commands 22 Firmware Versions...22 Node Date Information...23 Controller Node Properties 23 Controller Node EEPROM Log 23 Array and Controller Node Information 23 Network Interface Configuration 24 Port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 4
Statistics 28 Preserved Data Commands...28 Replication Commands...28 Physical Copy...28 Remote Copy...28 Virtual Copy...30 Service Commands...30 Disk Enclosure...30 Node...31 General System Maintenance 31 QoS Commands...31 System Upgrade...32 SNMP Agent Commands...32 System Reporter Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 5
8 CLI Command 72 cli...72 9 Compact Commands 75 compactcpg...75 compactld...77 10 Control Commands 79 controlencryption...79 controliscsiport...81 controlmag...83 controlpd...85 controlport...87 11 Create Commands 95 createald...95 createaldvv...99 createaocfg...105 createavv...107 createcpg... - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 6
...246 removesnmpuser...247 removespare...248 removesshkey...250 removetask...251 removetemplate...253 removeuser...254 removeuserconn...255 removevlun...256 removevv...258 removevvset...260 21 Service Commands 261 servicecage...261 servicehost...263 servicemag...265 servicenode...269 6 Contents - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 7
22 Set Commands 271 setalert...271 setaocfg...272 setauthparam...274 setbattery...278 setcage...280 setcim...282 setclienv...284 setcpg...286 setdate...291 setdomain...293 setdomainset...295 sethost...296 sethostset...299 setlicense...300 setnet...302 setnode...306 setntp...308 setpassword...309 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 8
showfirmwaredb...384 showhost...386 showhostset...389 showinventory...391 showiscsisession...392 showld...394 showldch...400 showldmap...404 showlicense...405 shownet...407 shownode...409 shownodeenv...417 showpatch...419 showpd...420 showpdata...431 showpdch...432 showpdvv...437 showport...440 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 9
shutdownsys...533 25 System Reporter (SR) commands 535 sraomoves...535 srcpgspace...537 srhistld...539 srhistpd...542 srhistport...545 srhistvlun...548 srldspace...551 srpdspace...554 srrgiodensity...556 srstatcmp...558 srstatcpu...560 srstatld...562 srstalink...564 srstatpd...566 srstatport...568 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 10
32 Upgrade Commands 662 upgradecage...662 upgradepd...664 33 Wait Command 665 waittask...665 34 Support and Other Resources 666 Contacting HP...666 HP 3PAR documentation...666 Typographic conventions...669 HP 3PAR branding information 669 35 Documentation feedback 670 Index...671 10 Contents - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 11
command syntax for the HP 3PAR OS CLI commands listed in or subcommand. The argument is often used to identify a specific node, volume, or disk. Indicates a specifier used with a required commands they modify. • Options, as indicated in this guide, are indicated by one or more letters, are preceded - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 12
, valid character formats include alphanumeric characters, periods, dashes, and underscores. In general, the following length limits are enforced by the HP 3PAR OS CLI: ◦ virtual volume name ≤ 31 characters ◦ Thinly Provisioned Virtual Volume (TPVV) name ≤ 31 characters ◦ virtual copy names ≤ 31 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 13
in CLI commands: • decimal - decimal is base-10 number system and uses the digits 0 to 9. • octal - octal is base-8 number system. It uses the digits 0 to set exports and when they are used for createvvcopy. Not all commands support object sets in their parameters; those that do indicate that they - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 14
sub,regexpat - Using regular expression (regex) pattern matching Regular expression patterns are used to match against strings. In the CLI the strings are usually descriptive text such as help text or event message strings. See the Tcl re_syntax documentation for detailed help; this help text is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 15
VV Name Patterns # clihelp sub,vvnamepat sub,vvnamepat - patterns supported for VV names Some commands allow the use of VV name patterns to indicate the destination virtual volume name(s) for the command. These patterns are expanded based upon information such as the source virtual volume, allowing - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 16
zone name. Filename Conventions for Windows® If a filename with an absolute or relative path is typed on the command line, there are no problems with backslashes: cli -pwf C:\password\system1 ... If a filename is entered for a command using the CLI shell, a Tcl application, then each backslash must - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 17
Variables Several options and environment variables are available at the global level. For complete information about these, refer to the HP 3PAR OS CLI Administrator's Manual. Exit Status Except where noted, the following codes are returned indicating success or failure for each individual command - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 18
of commands allowing you to administer your HP 3PAR storage system. To facilitate your navigation through this manual, this section provides an overview of to the encryption_control right "controlencryption" (page 79) Super, Service (for status subcommand only) Any role granted to the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 19
) "setcage" (page 280) "showcage" (page 361) Command admitpd Description Admits one or all physical disks to enable their use. Authority Super, Service 1 Any role granted the pd_admit right. checkpd Executes surface scans on physical disks. Super, Service1 Any role granted the pd_check right - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 20
right. showdomain Displays the list of domains Any role in the system. on a system. showdomainset Displays the domain sets defined on the HP 3PAR Storage System and their members. Any role in the system. 1 You need access to all domains in order to run this command. "setdomainset - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 21
status of the system hardware and software components. Authority Super, Service Any role granted the health_check right. Help and Utility Commands Authority For Details See Provides a means to set up Super, Edit, Browse, Service "CLI Command" (page 72) your CLI session or to enter directly into a - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 22
the system. "showauthparam" (page 353) Supports authentication and Super, Edit, Browse, Service "checkpassword" (page 61) authorization using You need access to all domains in order to run this command. Node Subsystem Management Commands Firmware Versions For Details See "setlicense" (page 300) - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 23
on the node. Any role granted the node_locate right. Locates a system by blinking Super, Service1 its LEDs. Any role granted the sys_locate right. Enables you to set Super, Service1 system-wide parameters such as the raw space alert. Any role granted the sys_set right. Displays the HP 3PAR - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 24
interface configuration. Authority Super, Service1 Any role granted the net_set right. Sets the NTP server to which Super, Service1 the HP 3PAR Storage System synchronizes. Any role granted the ntp_set right. shownet Displays the network configuration and status. Any role in the system - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 25
495) "showtocgen" (page 496) Command startnoderescue Description Authority Initiates a node rescue, which initializes the internal node disk of the specified node to match the contents of the other node disks. Super, Service Performance Management Commands Chunklet Statistics For Details See - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 26
Data Cache Memory Statistics Authority Super, Edit Any role granted the statpdch_set right. Any role in the system. Command statcmp Node CPU Statistics Description Authority Displays statistics for cache Any role in the system. memory pages. Command statcpu Logical Disk Statistics Description - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 27
Optimization Description Authority Displays physical disks with high service times and optionally performs load balancing. Super, Edit dynamically modified. See the HP 3PAR Command Line Interface Administrator's Manual for a complete discussion of HP 3PAR System Tuner Software and the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 28
volumes. Copies a virtual volume. Promotes a physical copy back to a base volume. Authority Super, Edit Any role granted the groupvvcopy_create right. Super, of HP 3PAR Remote Copy requires an HP 3PAR Remote Copy license. See the HP 3PAR StoreServ Storage Concepts Guide for additional - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 29
Command creatercopygroup creatercopytarget dismissrcopylink dismissrcopytarget dismissrcopyvv removercopygroup removercopytarget setrcopygroup setrcopytarget showrcopy showrctransport startrcopy startrcopygroup statrcopy Description Authority For Details See Creates a group for Remote Copy. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 30
Copies the differences of a Super, Edit virtual copy back to its base volume. Any role granted the sv_promote right. Updates a snapshot virtual Super (page 44) "controlmag" (page 83) Prepares a drive cage for service. Super, Service1 Any role granted the cage_service right. "servicecage" (page - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 31
right. 1 You need access to all domains in order to run this command. Node For Details See "upgradecage" (page 662) "upgradepd" (page 664) Command Description Authority servicenode Prepares a node for service. Super, Service1 Any role granted the node_service right. 1 You need access to all - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 32
to Super1 receive trap notifications. Any role granted the snmpmgr_ad right. For Details See "addsnmpmgr" (page 42) Allows a user to send an Super, Service SNMPv2 test trap to the list Any role granted the of managers snmp_check right Removes an SNMP trap manager. Super1 Any role granted the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 33
1 You need access to all domains in order to run this command. System Reporter Commands Command sraomoves srcpgspace srhistld srhistpd srhistport srhistvlun srldspace srpdspace srrgiodensity srstatcmp srstatcpu srstatld srstatlink srstatpd Description Authority Shows the space that Any role in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 34
role granted the cim_set right. ports for the CIM server. showcim startcim Displays the CIM server setting information and status. Starts the CIM server to service CIM requests. Any role in the system. Super, Service1 Any role granted the cim_start right. stopcim Stops the CIM server from - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 35
Authority For Details See Sets the SSH public key for Super, Service, Edit, Browse "setsshkey" (page 329) users enabling login scheduled tasks. Displays the state of tasks currently scheduled on the system. Super, Service Any extended role in the system. For Details See "createsched" (page 131) - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 36
Removes user connections. Super1 Any role granted the userconn_remove right. "removeuserconn" (page 255) setpassword Changes your password. Super, Edit, Service, Browse2 Any role granted the password_setany right can set any user password. Any role granted the password_setown right can only set - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 37
role granted the hostset_remove right. Displays defined hosts in the Any role in the system. system. Displays the host sets defined on the HP 3PAR Storage System and their members. Any role in the system. For Details See "createhost" (page 121) "createhostset" (page 123) "removehost" (page 235 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 38
granted the ld_create right. Creates logical disks. Super, Edit1 Any role granted the ld_create right. removeld Removes logical disks. Super, Service, Edit Any role granted the ld_remove right. showld Displays logical disks. Any role in the system. startld Starts logical disks. Super - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 39
volume vv_admit right. definitions to enable the migration of these volumes. "admitvv" (page 54) Performs validity checks of Super, Service, Edit1 virtual volume administrative information. Any role granted the vv_check right. "checkvv" (page 71) Automatically creates virtual Super, Edit1 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 40
Service, Edit LUN to the local HP 3PAR Storage System. Any role granted the vv_import right. "importvv" (page 204) Removes virtual volumes or logical disks from common provisioning groups. Super, Edit "removevv" (page 258) Any role granted the basevv_remove right can remove base - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 41
the virtual volume Any role in the system. sets defined on the HP 3PAR Storage System and their members. Starts virtual volumes. Super, Service1 Any role right. Displays VLUNs in the system. Any role in the system. Web Services API (WSAPI) Commands For Details See "createvlun" (page 151) " - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 42
) using an integer from 1 through 300. If not specified, the time defaults to 200 seconds. -version Integer value that specifies the SNMP version supported by the manager. Use "2" for SNMPv2 or "3" for SNMPv3. The default is "2". SPECIFIERS Specifies the IP address of the host where the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 43
of SNMP manager IPv6 address 5def:2008:abcd::161a with port number 9162: cli% addsnmpmgr -p 9162 5def:2008:abcd::161a NOTES • The HP 3PAR storage system does not support any form of name resolution. You must specify these IP addresses directly. • Issue the showsnmpmgr command to display the list of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 44
The admithw command admits new hardware into the system. AUTHORITY Super, Service NOTE: You need access to all domains in order to run of disks... Checking cabling... Check complete. NOTES • The admithw command handles any nodes, disks, or cages that have been added into the system. • In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 45
• The admithw command also handles creating system logical disks while adding and rebalancing spare chunklets. • Spares are allocated according to the algorithm specified by the Sparing Algorithm system parameter. admithw 45 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 46
definitions to enable the use of those disks. AUTHORITY • Super, Service • Any role granted the pd_admit right. NOTE: You need access to % admitpd 20 disks admitted NOTES • Physical disks cannot be used by the HP 3PAR operating system for storage until they are admitted into the system. • Specify - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 47
• Verify the admittance of physical disk definitions by issuing the showpd command. See "showpd" (page 420). • If no WWN is specified or if all the specified WWNs are admitted, the command succeeds. If all the specified WWNs could not be admitted, the command fails. admitpd 47 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 48
Functionality of this command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example adds a link on System2 (), using the node, slot, and port information of node 1, slot 1, port 1 of the Ethernet port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 49
be admitted. • For IP targets this list is made up of pairs composed of the node containing the Ethernet port on the local system and an IP address of the peer port . • For FC targets this list is made up of sets with the node, slot, and port of the FC port on the local system and WWN of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 50
is not required only if the group contains no volumes. RESTRICTIONS Functionality of this command requires the HP 3PAR Remote Copy license. Contact your local service provider for further information. EXAMPLES In the following example, the admitrcopytarget command adds the target target1 in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 51
groups, the volume will synchronize deltas between and the base volume. For asynchronous periodic groups, the volume will synchronize deltas between < snapname> and a snapshot of the base. Specifies the name of the existing Remote Copy - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 52
must be used. For more information, issue: clihelp sub,globpat RESTRICTIONS Functionality of this command requires the HP 3PAR Remote Copy license. Contact your local service provider for more information. EXAMPLES In the following example, the admitrcopyvv command adds the volume vv1 to the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 53
In the following example, the admitrcopyvv command adds all the volumes that start with the name testvv to the primary volume group Group1. At the same time, it adds all the volume testvv*.r on the target system InServ1_in to the corresponding secondary volume group that was previously created when - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 54
of this command requires the Peer Motion license. Contact your local service provider for more information. EXAMPLES The following example admits two remote VVs that have been exported to the HP 3PAR storage system in preparation for migration: cli% admitvv migvv.0:50002AC00037001A migvv - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 55
tasks. SYNTAX canceltask [option] {all|...} AUTHORITY • Service, Super, Edit • Any role granted the task_cancel right. select q=quit y=yes n=no: y NOTES • See the HP 3PAR OS CLI Administrator's Manual for additional information and examples regarding task management and task management - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 56
6 Change Command changedomain DESCRIPTION The changedomain command changes the currentdomain CLI environment parameter. SYNTAX changedomain [] AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS Name of the domain to be set as the working domain for the current CLI session. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 57
alerts, go to http://www.hp.com/support/hpgt/3par and select your server platform. SYNTAX checkhealth [ | ] AUTHORITY • Super, Service • Any role granted the Checking ld Checking license Checking network Checking node Checking pd Checking pdch Checking port checkhealth 57 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 58
vlun Checking vv Component Description Qty Alert New alerts 6 Cage Cages not on current firmware 2 Date Date is not the same on all nodes 1 LD LDs not mapped to a volume 3 License Golden License. 1 PD PDs that are degraded or failed 2 pdch LDs with chunklets on a remote disk - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 59
system shutdown and optionally repairs inconsistent logical disks. SYNTAX checkld [options] ... Any role granted the ld_check right AUTHORITY • Super, Service • Any role granted the ld_check right NOTE: You need access to all domains in order to run this command. OPTIONS -y|-n Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 60
The following example attempts to recover chunklet 1032:10 of logical disk vv.adm.0, and there will be output about the progress: cli% checkld -y -p -recover 1032:10 vv.adm.0 NOTES • Repairing logical disks refers to making logical disks consistent. • Consistency for RAID-1 means that all mirrors in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 61
based on the configuration parameters set with setauthparam command for use with LDAP. SYNTAX checkpassword [] AUTHORITY • Super, Edit, Browse, Service . NOTES • The output of the checkpassword command is based on current authentication and authorization parameters and might differ from - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 62
setauthparam command has been used to change parameters or data in the LDAP server has changed since the user last logged in. • The showuserconn command can be used to verify the authorization levels assigned at login. 62 Check Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 63
DESCRIPTION The checkpd command executes surface scans or diagnostics on physical disks. SYNTAX checkpd scrub|diag [options ] ... AUTHORITY • Super, Service • Any role granted the pd_check right. NOTE: You need access to all domains in order to run this command. OPTIONS The following - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 64
Performs read, write, or verifies test diagnostics. ... The ID of the physical disk to be checked. Only one pd_ID can be specified for the "scrub" test. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES In the following example, chunklet 500 on physical disk 1 is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 65
ports. SYNTAX checkport [options ] AUTHORITY Super, Service Any role granted the port_check right. NOTE: You need Specifies the port to be tested. node Specifies the node using a number from 0 through 7. slot Specifies the PCI bus slot in the specified node using - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 66
NOTES • When both the -time and -iter options are specified, the first limit reached terminates the program. If neither are specified, the default is 1,000 iterations. The total run time is always limited to 300 seconds even when not specified. • The default loopback is an ELS-ECHO sent to the HBA - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 67
throughput test between two connected HP 3PAR storage systems. SYNTAX • • checkrclink portconn AUTHORITY • Super, Service • Any role granted the rclink_check right. NOTE the interface from which to check the link, expressed as node:slot:port. Specifies the address of the target - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 68
Specifies the port on which to run the test. If this specifier is not used, the test automatically runs on port 3492. RESTRICTIONS The Remote Copy ports must be configured via the controlport command before this test can be carried out; however, this test can be performed before links are admitted - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 69
c. (Optional) To end the test before it completes, on SystemA enter: # checkrclink stopclient d. After the test is complete, on SystemB enter: # checkrclink stopserver checkrclink 69 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 70
command allows a user to send an SNMPv2 test trap to the list of managers as specified in showsnmpmgr. SYNTAX checksnmp AUTHORITY Super, Service Any role granted the snmp_check right OPTIONS None SPECIFIERS None RESTRICTIONS None EXAMPLES The following example shows the case when there are SNMP - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 71
information in the event of an uncontrolled system shutdown and optionally repairs corrupted virtual volumes. SYNTAX checkvv [options] ... AUTHORITY • Super, Service • Any role that is granted the vv_check right. NOTE: You need access to all domains in order to run this command. OPTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 72
a means to set up your CLI session or to enter directly into a CLI shell. SYNTAX cli [options] [] AUTHORITY Super, Edit, Browse, Service OPTIONS -v Displays the CLI client version. -b Displays the CLI client build level. -h Displays help for the cli command. -tpdportnum Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 73
-nohdtot Does not print header and totals. -csvtable Prints table data as Comma Separated Values (CSV). -listdom Indicates the domain associated with the storage server. -clientname Sets name of the client application. -clientver Sets version of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 74
NOTES • If the cli command is issued without any arguments, you are placed in a CLI shell. After commands are issued, the CLI exits unless the -cmdloop option was specified. • Multiple commands can be entered by quoting a semicolon separator: cli showdate ";" showversion ENVIRONMENT VARIABLES - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 75
9 Compact Commands compactcpg DESCRIPTION The compactcpg command consolidates logical disk space in Common Provisioning Groups (CPGs) into as few logical disks as possible, allowing unused logical disks to be removed and their space reclaimed. SYNTAX compactcpg [options] ... compactcpg - - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 76
to compact CPG 'testcpg' ? select q=quit y=yes n=no: y Task 612 started NOTES • Logical disks that are consolidated must have the same owner and backup nodes. • If one logical disk exists with a different owner and backup node, that logical disk will be compacted individually. 76 Compact Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 77
compactld DESCRIPTION The compactld command consolidates space on the logical disks. SYNTAX compactld [options ] ...|... AUTHORITY • Super, Edit • Any role granted the ld_compact right. OPTIONS -pat Compacts the logical disks that match any of the specified patterns. -cons - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 78
EXAMPLES In the following example, logical disk pdsld0.0 is compacted: cli% compactld -f pdsld0.0 Compacting LDs: pdsld0.0 NOTES None. 78 Compact Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 79
enable • controlencryption rekey • controlencryption status [options] AUTHORITY • Super • Any role granted to the encryption_control right • Super, Service (for status subcommand only) • Any role granted to the encryption_status right NOTE: You need access to all domains in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 80
password must be supplied on restore. For enable and rekey, there must be no failed disks. Because the backup needs to be stored off the nodes, all subcommands other than status need to be executed using a version of the CLI running on a remote system. The Data Encryption license is required to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 81
> • controliscsiport dhcp on|off [-f] • controliscsiport isns [-f] • controliscsiport isnsport [-f] • controliscsiport delete [-f] • controliscsiport ping [] AUTHORITY • Super - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 82
packets to send. If a value is specified, it should be an integer from 1 through 64. If a value is not specified, the default is one packet. The physical location of the iSCSI target port. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES In the following - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 83
command when replacing a drive magazine or disk drive within a drive magazine. SYNTAX controlmag offloop|onloop [options] AUTHORITY • Super, Service • Any role granted the mag_control right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS offloop - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 84
EXAMPLES The following example requests that drive magazine 1 in drive cage cage0 be put on loop: cli% controlmag onloop cage0 1 NOTES Taking a drive magazine off-loop has the following consequences: • Relocation of chunklets. • Affected logical disks are put into write-through mode. • Momentary dip - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 85
is issued with the spindown subcommand, data on the specified drive becomes inaccessible. SYNTAX controlpd spinup|spindown [options] ... AUTHORITY • Super, Service • Any role granted the pd_control right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS spinup - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 86
NOTES Issuing the controlpd command puts the specified disk drive in a not ready state. Furthermore, if this command is issued with the spindown subcommand, data on the specified drive becomes inaccessible. 86 Control Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 87
slot:port>... • controlport rcip ping [-c |-w |-s |-pf] ... • controlport rcfc init [-f] • controlport rcfc delete [-f] AUTHORITY • Super, Service • Any role granted the port_control right. NOTE: You need access to all - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 88
Also allows setting the unique node WWN option for the port. When unique_nwwn is enabled, the port presents a unique node name on the connection and this not supported with RCIP ports. vcn Sets the VLUN Change Notification (VCN) generation support (enable or disable). When VCN generation support is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 89
the default of 1500. The largest supported value is 9000 and the smallest to issue this subcommand. rcip speed Instructs the specified Remote Copy interface(s) to see "SPECIFIERS"). Permitted for Super, Service, Browse, and Edit users. rcfc node WWN on the specified port. -m controlport 89 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 90
This option can only be used with the rst subcommand. Resets the mode of the port. The port can be reset into a target or initiator mode. If not specified, the port is reset to its current mode. If the port's mode change value is prohibited, this command fails when attempting to reset to a different - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 91
coalescing is enabled or disabled. The value can be set as enable or disable. This specifier must be used with the intcoal subcommand. Specifies the port to be controlled. node Specifies the node using a number between 0 and 7. slot Specifies the PCI bus slot in the specified - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 92
, or 1000) and duplex setting (half or full) for a Remote Copy interface. In addition to this specifier, you must also specify an interface using . If no speed or duplex settings are specified, or if you specify auto with the rcipspeed subcommand, the system auto-negotiates the speed - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 93
rcip mtu 9000 6:3:1 Remote Copy change successful. The following example shows how to set Remote Copy interface 172.16.1.11 on a Gigabit Ethernet port 1 in node 6, slot 3 using a netmask of 255.255.255.0: cli% controlport rcip addr 172.16.1.11 255.255.255.0 6:3:1 Are you sure you want to change the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 94
of the offline port causes the online partner port to undergo mode change as well. This results in loss of use of the partner port because it is no longer online. • Issuing the controlport rst -l command affects both ports of a port pair. Only use this command when irreversible damage has been done - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 95
disks. SYNTAX createald [options] [g|G|t|T] AUTHORITY • Super, Service, Edit • Any role that is granted the ld_create right. NOTE: function of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine (mag). - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 96
or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated -devtype are used to limit the disks that are used to create LDs based on the characteristics of the disk drive. -tc_gt Specifies that - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 97
-p -fc_gt 60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. -domain Specifies the domain. The default is to create logical disk(s) in the current domain, or no domain if the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 98
-cpsa and -cpsd options). -listlds Specifies that the names of any newly created LDs should be displayed. SPECIFIERS Specifies the logical disk base name (up to 24 characters in length). The name is created by concatenating the name with an integer value - starting at zero, incrementing it - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 99
KB for RAID-0, RAID-1 and RAID-5. For RAID-6, the default is a function of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine (mag). This option has no meaning for RAID-0. -ch first|last createaldvv 99 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 100
or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is devtype are used to limit the disks that are used to create logical disks based on the characteristics of the disk drive. -tc_gt Specifies that - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 101
, -p -fc_gt 60-fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. -domain Specifies the domain. The default is to create it in the current domain, or no domain if the current - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 102
time are specified, then the retention time cannot be longer than the expiration time. This option requires the HP 3PAR Virtual Lock License. Contact your local HP 3PAR Authorized Service Provider for more information. -aw This option was deprecated in the 2.3.1 release and will be changed - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 103
is considered invalid. no_stale_ss Specifies that invalid snapshot volumes are not permitted. Failure to update a snapshot is considered a failure to write to the base volume. one_host This constrains the export of a volume to one host or one host cluster (when cluster names can be used as a host - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 104
NOTES For this command: • MB = 1048576 bytes • GB = 1024 MB • TB = 1024 GB 104 Create Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 105
. • A CPG can only belong to one AO configuration. • Active use of Adaptive Optimization requires an Adaptive Optimization license. Contact your HP representative for more information. EXAMPLES The following example creates a new AO configuration called aocfg1. The optimization bias (mode) is set to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 106
The following example creates a new AO configuration called aocfg2. The optimization bias defaults to Balanced, and no Tier 1 CPG is specified. cli% createaocfg -t0cpg R1SSDcpg2 -t2cpg R6NLcpg2 aocfg2 106 Create Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 107
createavv DESCRIPTION This command was deprecated in the 2.2.3 release and will be changed or removed in a future release. Please use the createvv command in the future. The createavv command creates a virtual volume where logical disk mapping is determined by the system. Syntax The syntax for the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 108
is considered invalid. no_stale_ss Specifies that invalid snapshot volumes are not permitted. A failure to update a snapshot is considered a failure to write to the base volume. one_host This constrains the export of a volume to one host or one host cluster (when cluster names can be used as a host - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 109
RESTRICTIONS • Logical disks must be available to run the createavv command. Issue the createald command to create logical disks. See "createald" (page 95) for more information. • The . , , and specifiers cannot be used if the createavv -cpg - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 110
of logical disk storage that is created on each auto-grow operation. The default and minimum growth increments vary according to the number of controller nodes in the system. If is non-zero, it must be 8 G or bigger. The size can be specified in MB (default) or GB (using g or - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 111
KB for RAID-0, RAID-1 and RAID-5. For RAID-6, the default is a function of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine (mag). If no availability level is specified, the default is cage. This option - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 112
or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated to select the disks that are used to create common provisioning groups based on the characteristics of the disk. -tc_gt Specifies that - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 113
60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS Specifies the name of the common provisioning group being created. RESTRICTIONS Access to all domains is required - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 114
the growth is done by creating logical disks that must be created in units of the logical disk RAID set size. See the HP 3PAR StoreServ Storage Concepts Guide for further details. • By default, logical disk are created using only physical disks with the same device type. (By default, the Fibre - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 115
• Access to all domains is required to run this command. • Use of this command requires a Domain license. Contact your local HP 3PAR representative for information. EXAMPLES The following example displays the creation of domain Engineering with an informational comment: cli% createdomain -comment - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 116
createdomainset description The createdomainset command defines a new set of domains and provides the option of assigning one or more existing domains to that set. The command also allows the addition of domains to an existing set by use of the -add option. SYNTAX createdomainset [options] - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 117
are specified, then the retention time cannot be longer than the expiration time. This option requires the HP 3PAR Virtual Lock License. Contact your local HP 3PAR Authorized Service Provider for more information. -noblock When a read-only snapshot is taken, the storage system blocks host I/O to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 118
>. If the is not specified, an ID is chosen automatically. RESTRICTIONS Use of this command requires a HP 3PAR Virtual Copy license. Contact your local HP 3PAR representative for information. EXAMPLES In the following example, Virtual Volumes VV1 and VV2, and their underlying logical disks are - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 119
physical copy of its specifier until it is promoted to a base virtual volume using the promotevvcopy command, which also removes the saved snapshot of the specifier. The saved snapshots should not be removed manually. If the same specifier is copied to different < - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 120
volume. Indicates the parent virtual volume. RESTRICTIONS None. NOTES • The creategroupvvcopy command can be issued multiple times. However, the HP 3PAR Storage System allows only two active physical copy tasks to run concurrently. Any additional physical copy tasks are queued, pending - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 121
createhost DESCRIPTION The createhost command creates or adds paths to a new system host and provides the option of assigning one or more paths to that host. Paths can be either Fibre Channel WWNs or iSCSI names. The command also provides options to annotate the host with descriptor information such - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 122
example creates host ibm520-13 with an 8/AIX-legacy host persona: cli% createhost -persona 3 ibm520-13 10000000C97B142E NOTES • If the host is running the HP 3PAR Host Agent then createhost may be called with no paths and the hostname reported by the agent to create the host with all reported paths - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 123
createhostset DESCRIPTION The createhostset command defines a new set of hosts and provides the option of assigning one or more existing hosts to that set. The command also allows the addition of hosts to an existing set by use of the -add option. SYNTAX createhostset [options] [ - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 124
To create a host set with a comment and a host in it: cli% createhostset -comment "A host set" oraset ora1 NOTES None. 124 Create Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 125
the ld_create role. NOTE: You need access to all domains in order to run this command. OPTIONS -o Owner node for the logical disk. -b Backup owner node for the logical disk. -md Option =1 only, the number of mirror copies in the set. -ps - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 126
. For RAID-5 or RAID-6 volume the parityset (-psflag) must be specified. The owner and backup_owner option should be a number between 0 and 7 and should be the node ID of a valid node in the system. The mirror depth can take any value between 2 and 4, inclusive. 126 Create Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 127
by setting an automatic resynchronization period through the setrcopygroup command. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example creates an asynchronous periodic mode volume group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 128
If using domains, the syntax would appear as: cli% creatercopygroup -domain domain2 Group1 System2_out:periodic If using volume auto-create: cli% creatercopygroup -usr_cpg Localcpg target:Targetcpg -snp_cpg Localsnp target:Targetsnp groupname target:periodic NOTES • If the mirror_config policy is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 129
RESTRICTIONS Functionality of this command requires the HP 3PAR Remote Copy license. Contact your local service provider for more information. EXAMPLES The following example creates a target definition named System2 on the primary system, where the node numbers of the primary system's Ethernet ports - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 130
1:4:1:23410002AC000060 NOTES • IP targets are made up of pairs composed of the node, slot and port of the Ethernet port on the local system and an port on the target system. • FC targets are made up of sets with the node, slot, and port of the FC port on the local system and WWN of the peer - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 131
[options] AUTHORITY • Super, Service • Any role that is granted the sched_create right. OPTIONS -run_once that it is either a CLI command or script that has been distributed by HP 3PAR. Can be up to 127 characters in length. Specifies the use - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 132
Day-of-Month Month Day-of-Week Allowed Values 0-59 * or 0-23 * or 1-31 * or 1-12 * or 0-6 (0 is Sunday) • Scheduling on February 29 is not supported. • Lists are allowed. A list is a set of numbers (or ranges) separated by commas. Examples: "1,2,5,9", "0-4,8-12". 132 Create Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 133
• Ranges of numbers are allowed. Ranges are two numbers separated with a hyphen. The specified range is inclusive. For example, 8-11 for an hour entry specifies execution at hours 8, 9, 10 and 11. Ranges must be specified from low to high. • One of six special strings may also appear instead of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 134
. The length of must be 6 to 8 characters. SPECIFIERS Specifies the SNMPv3 user name. The user name must be an existing HP 3PAR local user. NOTE: Issuing the createsnmpuser command results in the system prompting for a password. Type in the password for the user and then press - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 135
and are reserved explicitly for spares, thereby guaranteeing a minimum amount of spare space. SYNTAX createspare [options ] ... AUTHORITY • Super, Service • Any role granted the spare_create right. NOTE: You need access to all domains in order to run this command. OPTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 136
EXAMPLES • The following example marks chunklet 1 as spare for physical disk 15: cli% createspare 15:1 • The following example specifies the position in a drive cage, drive magazine, physical disk, and chunklet number. -pos 1:0.2:3:121, where 1 is the drive cage, 0.2 is the drive magazine, 3 is the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 137
up data on the base volume and allowing multiple copies of a base volume to be modified without affecting the original base volume. Syntax createsv [ time. This option requires the HP 3PAR Virtual Lock License. Contact your local HP 3PAR Authorized Service Provider for more information. -noblock - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 138
Virtual Copy license. Contact your local HP 3PAR representative for information. • A read-only snapshot of a read-only source volume is not allowed. • A read/write snapshot of a read/write snapshot or base is not allowed. EXAMPLES The following example creates a read-only snapshot volume svro_vv0 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 139
createtemplate DESCRIPTION The createtemplate command creates Virtual Volume (VV), Logical Disk (LD), and Common Provisioning Group (CPG) templates. Templates are sets of predetermined parameters that are applied to the creation of VVs, LDs, and CPGs. Use of this command with the vv specifier to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 140
ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage -nd Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen (0-7). The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 141
-devtype are used to limit the disks that are used to create LDs based on the characteristics of the disk drive. -tc_gt Specifies that greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. • The following options are used only for VV - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 142
is considered invalid. no_stale_ss Specifies that invalid snapshot volumes are not permitted. Failure to update a snapshot is considered a failure to write to the base volume. one_host This constrains the export of a volume to one host or one host cluster (when cluster names can be used as a host - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 143
, the amount of logical disk storage created on each auto-grow operation. The default and minimum growth increments vary according to the number of controller nodes in the system. If is non-zero it must be 8 G or bigger. Size can be specified in megabytes (default) or in gigabytes by using - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 144
terabytes by using the t|T parameter. To specify the size in gigabytes, enter g or G, for terabytes, enter t or T, directly after the specified size (no space). The default is 0. -sdgw [g|G|t|T] Issues a warning alert when the used logical disk space exceeds this amount. A size of 0 means no - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 145
createtpvv DESCRIPTION This command is deprecated and will be removed in a subsequent release. Please use the createvv -tpvv command in the future. The createtpvv command creates a multi-space Thinly Provisioned Virtual Volume (TPVV). When the -snp_cpg option is specified, both of the user space and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 146
your local HP 3PAR Authorized Service Provider for more information. • The following defines the volume policy: -pol [,...] Specifies VV policies. stale_ss Specifies that invalid snapshot volumes are permitted. Failure to update snapshot data does not affect the write to the base volume - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 147
the allocation of partially written data pages. zero_detect This policy enables the HP 3PAR Storage System to scan for zeros in the incoming write data. This for the base TPVV. NOTE: Thin Persistence can have some performance implications during extremely busy system conditions. HP recommends the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 148
In the preceding example, a 1 GB TPVV named tpvv1 is allocated from a CPG named cpg1 and its allocation warnings and limits are set at 50% and 75%, respectively. The following example creates 3 VVs vv1.2, vv1.3, vv1.4: cli% createtpvv -cnt 3 cpg1 vv1.2 1g The following example creates a TPVV named - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 149
belong. The domain name can be up to 31 characters in length. The user role. Valid values for role are "browse", "edit", "service", "super" and any extended role. Use showrole to list extended roles. RESTRICTIONS • Access to all domains is required to run this command. • Encrypted passwords - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 150
EXAMPLES The following example displays the successful creation of a new user user1 with the clear-text password 123456, with access to all service pools, and with edit level authority: cli% createuser -c 123456 user1 testdomain edit User created NOTES • If no password is specified using the -c or - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 151
the current system state matches the rule established by the VLUN template. There are four types of VLUN templates: • port presents - created when only the node:slot:port are specified. The VLUN is visible to any initiator on the specified port. • host set - created when a host set is specified. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 152
using up to 31 characters. Specifies the host set where the LUN is exported, using up to 31 characters. Specifies the system port of the virtual LUN export. node Specifies the system port, where the node is a number between 0 and 7. slot Specifies the PCI bus slot in the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 153
• Verify the creation of VLUNs by issuing the showvlun command. See "showvlun" (page 503) for more information. • Conflicts between overlapping VLUN templates are resolved by a priority order among templates with matched set being the highest and port presents the lowest. • Exports from a VV set - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 154
createvv DESCRIPTION The createvv command creates volumes that are provisioned from one or more Common Provisioning Groups (CPGs). Volumes can be fully provisioned from a CPG or can be thinly provisioned. You can optionally specify a CPG for snapshot space for fully provisioned volumes. Syntax - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 155
time. This option requires the HP 3PAR Virtual Lock License. Contact your local HP 3PAR Authorized Service Provider for more information. - permitted. Failure to update a snapshot is considered a failure to write to the base volume. one_host This constrains the export of a volume to one host or one - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 156
enabled during Thin Persistence and Thin Conversion operations. The zero_detect policy should be disabled during normal operation. no_zero_detect This policy disables the HP 3PAR Storage System to scan for zeros in the incoming write data to reclaim allocated space on the volume. This is the default - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 157
subsequently removed, this can lead to unused space in the LDs that cannot be reclaimed. Using -cnt option without the -shared option avoids this problem, but can be inefficient when creating small volumes due to the overhead of creating a larger number of unshared LDs for the volumes. • Verify the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 158
volume set (as indicated with the specifier). The set name must start with set:. The parent volume must be a base volume or read/write snapshot. This option cannot be used with the -r option. -r Specifies that the destination volume be resynchronized with - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 159
volume (or each member of the destination volume set) must be a writable base volume (not a snapshot) of equal or greater size than a parent volume sub, vvnamepat for details. Note that the time/date related patterns are not supported in this command. • If the -s option is specified to save a - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 160
The createvvcopy command can be issued multiple times. However, the HP 3PAR Storage System allows only two active physical copy tasks to run If the resynchronization snapshot is saved, it can later be manually deleted. If the resynchronization snapshot is deleted, later resynchronization is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 161
group snapshots at the same point in time so that related structures on different volumes in the group remain consistent. • On systems that support zero_detect, if destination volume is a TPVV, zero_detect policy is enabled at start of physical copy. After physical copy completes, the policy is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 162
createvvset DESCRIPTION The createvvset command defines a new set of Virtual Volumes (VV) and provides the option of assigning one or more existing VVs to that set. The command also allows the addition of VVs to an existing set by use of the -add option. SYNTAX createvvset [options] [ - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 163
To add a VV to the set: cli% createvvset -add vvset vv1 To create a VV set with a comment and a collection of VVs in it: cli% createvvset -comment "Our Oracle VVs" -cnt 10 oravv oravv.0 NOTES None. createvvset 163 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 164
12 Dismiss Commands dismisspd DESCRIPTION The dismisspd command removes Physical Disk (PD) definitions from system use. SYNTAX dismisspd ... AUTHORITY • Super, Service • Any role that is granted the pd_dismiss right. NOTE: You need access to all domains in order to run this command. OPTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 165
Specifies the node, slot, and port of the Fibre Channel port on the local system and a World Wide Name (WWN) of the peer port on the target system. This specifier can be repeated. RESTRICTIONS • This command requires an HP 3PAR Remote Copy Software license. Contact your local service provider for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 166
. • For IP targets, this list is made up of pairs composed of the node containing the Ethernet port on the primary system and an IP address on the backup Fibre Channel targets, this list is made up of sets with the node, slot, and port of the Fibre Channel adaptor port on the primary system and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 167
. The name of the group that currently includes the target. RESTRICTIONS • This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for further information. • The dismissrcopytarget command will not allow the removal of a group's last target - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 168
volumes. If this specifier is not used, the specifier must be used. RESTRICTIONS • This command requires the HP 3PAR Remote Copy license. Contact your local service provider for more information. • A volume cannot be removed from a group that is not currently stopped. 168 Dismiss Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 169
EXAMPLES The following example dismisses virtual volume vv1 from Group1: cli% dismissrcopyvv vv1 Group1 The following example dismisses all virtual volumes that start with the name testvv from Group1: cli% dismissrcopyvv -pat testvv* Group1 The following example dismisses volume vv1 from Group1 and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 170
13 Free Command freespace DESCRIPTION The freespace command frees snapshot administration and snapshot data spaces from a Virtual Volume (VV) if they are not in use. SYNTAX freespace [options] ...|... AUTHORITY • Super, Edit • Any role that is granted the space_free right. OPTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 171
14 Grow Commands growaldvv DESCRIPTION This command was deprecated in the 2.2.4 release and will be changed or removed in a future release. Please use the growvv command in the future. If virtual volumes were created with deprecated commands then only deprecated commands can be used to modify - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 172
128 KB for RAID-5. For RAID-6 the step size is a function of the set size. -ha || Specifies that the RAID layout must support a failure of one port pair, one cage, or one mag. The default depends on whether the RAID type is specified. If the RAID type is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 173
or a range of integers specified from low to high. -nd Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a comma (1,2,3). A range of nodes is separated with a hyphen (0-7). The primary path of the disks must be on the specified - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 174
60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS Specifies the name of the virtual volume, using up to 31 characters, that you are enlarging. RESTRICTIONS • Access - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 175
, the specified options only apply to the newly enlarged sections of the volume. This can result in a VV that has different characteristics in its base and grown sections. • If options were used in the creation of the original virtual volume (createaldvv) that were not the default option values, and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 176
growavv DESCRIPTION This command was deprecated in the 2.2.4 release and will be changed or removed in a future release. Please use the growvv command in the future. If virtual volumes were created with deprecated commands then only deprecated commands can be used to modify virtual volumes. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 177
Specifies the LDs to be used as snapshot data space. The LDs are identified by one or more integers (item). Integers can be provided as a single number (1), a comma separated list of numbers (1,2,3), or a range of numbers separated with a dash (1-4). Specifies the size of the snapshot - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 178
growtpvv DESCRIPTION This command was deprecated in the 2.2.3 release and will be changed or removed in a future release. Please use the growvv command in the future. If virtual volumes were created with deprecated commands then only deprecated commands can be used to modify virtual volumes. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 179
during this process, it is possible that remote volumes are grown and the local volume is not. If this occurs, remote volumes must be grown manually before the group can be started. growvv 179 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 180
15 Hist Commands histch DESCRIPTION The histch command displays a histogram of service times in a timed loop for individual chunklets. SYNTAX histch [options ] AUTHORITY Any role in the system. OPTIONS -ld Specifies the Logical Disk (LD), - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 181
2147483647. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, of all columns starting with the one which corresponds to the threshold service time. For example,-t,8,100 specifies that only the rows where the 8ms - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 182
the column to its right (or infinity for the last column). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • Each I/O size histogram column shows the number of accesses with I/O size between the size shown in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 183
histld DESCRIPTION The histld command displays a histogram of service times for Logical Disks (LDs) in a timed loop. SYNTAX histld [options ] [...] AUTHORITY Any role in the system. OPTIONS -vv ...|... Show only - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 184
2147483647. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, of all columns starting with the one which corresponds to the threshold service time. For example,-t,8,100 specifies that only the rows where the 8ms - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 185
the column to its right (or infinity for the last column). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • Each I/O size histogram column shows the number of accesses with I/O size between the size shown in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 186
Specifies the World Wide Name (WWN) of the physical disk for which service times are displayed. -nodes Specifies that the display is limited to specified nodes and physical disks connected to those nodes. The node list is specified as a series of integers separated by commas (1,2,3). The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 187
to stop after the indicated number of iterations using an integer from 1 through 2147483647. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning with 0. You must specify a column number. In addition, you can - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 188
all columns starting with the one which corresponds to the threshold service time. For example,-t,8,100 specifies that only the rows where or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 189
arguments are used to limit the disks that are used to create logical disks based on the characteristics of the disk drive. -tc_gt Specifies that physical than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS None. RESTRICTIONS None. histpd 189 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 190
). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • Each I/O size histogram column and -p have been replaced with -nodes , -slots , and -ports . 190 Hist Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 191
DESCRIPTION The histport command displays a histogram of service times for ports within the system. SYNTAX histport of a single integer (1). If the slot list is not specified, all disks on all nodes are displayed. -ports Specifies that the display is limited to specified ports and PDs - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 192
to stop after the indicated number of iterations using an integer from 1 through 2147483647. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning with 0. You must specify a column number. In addition, you can - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 193
). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • Each I/O size histogram column >, and -p have been replaced with -nodes , -slots , and -ports . histport 193 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 194
histrcvv DESCRIPTION The histrcvv command shows a histogram of total Remote Copy service times and backup system Remote Copy service times in a timed loop. SYNTAX histrcvv [options ][|]... AUTHORITY Any role in the system. OPTIONS -d Specifies the interval in seconds - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 195
as a percentage. If this option is not specified, the histogram shows the service times. -prev Specifies that the histogram displays data from a previous sample. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 196
RESTRICTIONS None. EXAMPLES The following example shows histograms sums for all synchronous Remote Copy volumes: cli% histrcvv -vvsum -sync 09:50:40 03/30/10 ----------Svt (millisec Rmt Svt (millisec)-------VVname RCGroup Target Mode 0.50 1 2 4 8 16 32 64 128 256 0.50 1 2 4 8 16 32 64 128 256 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 197
command displays Virtual Volume Logical Unit Number (VLUN) service time histograms. SYNTAX histvlun [options ] AUTHORITY list can also consist of a single integer (1). If the node list is not specified, all disks on all nodes are displayed. -slots Specifies that only exports from - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 198
is to stop after the indicated number of iterations using an integer from 1 through 2147483647. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 199
of all columns starting with the one which corresponds to the threshold service time. For example,-t,8,100 specifies that only the rows where the 8ms None. EXAMPLES The following example displays two iterations of a histogram of service times for all VLUNs: cli% histvlun -iter 2 12:48:50 10 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 200
histogram column shows the number of accesses with service times between the point in time shown in last column). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • Previous options -n , -s , - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 201
histvv DESCRIPTION The histvv command displays Virtual Volume (VV) service time histograms in a timed loop. SYNTAX histvv [options ] [|]... AUTHORITY Any role in the system. OPTIONS -domain ...|... Shows only the VVs - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 202
2147483647. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, of all columns starting with the one which corresponds to the threshold service time. For example,-t,8,100 specifies that only the rows where the 8ms - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 203
the column to its right (or infinity for the last column). Unless all columns are shown, the first column shows the number of accesses with service times less than the heading of the second column. • If a or are specified, then VVs with names that match any of the patterns - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 204
initiates the migration of data from a remote LUN to the local HP 3PAR Storage System. The remote LUN must be prepared for migration by importvv [options] ... AUTHORITY • Super, Service, Edit • Any role granted the vv_import right. OPTIONS -f Specifies that the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 205
requires the Peer Motion license. Contact your local service provider for more information. EXAMPLES The following * NOTES A volume is imported online but the volume can only be accessed using the HP 3PAR storage system that is importing the volume. For all the fields, the patterns - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 206
locatecage [option ] AUTHORITY • Super, Service • Any role granted the cage_locate right. NOTE: You need access port LED will oscillate between green and off. The specifier is not supported for DC3 drive cages. Indicates the drive magazine by number. • - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 207
EXAMPLES The following example causes the Fibre Channel LEDs on the drive cage cage0 to blink for 20 seconds: cli% locatecage -t 20 cage0 NOTES • Issue the showcage command for a list of cage names. • If no port or magazine is specified, all LEDs in the cage are set as amber or oscillate (depending - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 208
locatenode DESCRIPTION The locatenode command helps locate a particular node or its components by blinking LEDs on the node. By default all LEDs on the node will blink. SYNTAX locatenode [options] AUTHORITY • Super, Service • Any role granted the node_locate right. NOTE: You need access to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 209
. The default is all nodes. -nocage Specifies that LEDs on the drive cages should not blink. The default is to blink LEDs for all cages in the system. SPECIFIERS None. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES In the following example, an HP 3PAR Storage System is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 210
DESCRIPTION The movech command moves a list of chunklets from one physical disk to another. SYNTAX movech [options] ... AUTHORITY • Super, Service, Edit • Any role granted the ch_move right. NOTE: You need access to all domains in order to run this command. OPTIONS -nowait Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 211
EXAMPLES The following example moves the chunklet in position 0 on disk 24, to position 50 on disk 64 and chunklet in position 0 on disk 25, to position 1 on disk 27: cli% movech 24:0-64:50 25:0-27:1 Are you sure you want to move the chunklets? select q=quit y=yes n=no: y Move -State- -- - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 212
• remote_pds_used. Remote PDs used. • ldpattern_not_obeyed. LD pattern was not obeyed. • raid_availability_reduced. RAID availability reduced. NOTES • Chunklets moved through the movech command are only moved temporarily. Issuing either the moverelocpd or servicemag resume command can move the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 213
moves data from specified Physical Disks (PDs) to a temporary location selected by the system. SYNTAX movechtospare [options] AUTHORITY • Super, Service, Edit • Any role granted the ch_movetospare right. NOTE: You need access to all domains in order to run this command. OPTIONS -nowait - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 214
• failed. Indicates the chunklet was not moved. • Detailed_State. Provides additional details of the move with General Information, Error Information, or Degraded Information. General Information: • dest_unknown. Destination is unknown. • dest_unknown. Destination is known. • valid_move. Source and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 215
moves data from specified Physical Disks (PDs) to a temporary location selected by the system. SYNTAX movepd [options] ... AUTHORITY • Super, Service, Edit • Any role granted the pd_move right. OPTIONS -nowait Specifies that the command returns before the operation is completed. -dr Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 216
NOTES • The destination physical disks do not need to be specified; the system automatically determines the spare locations. • Specifying the -dr option can be used to see if the specified moves succeed and the results (quality) of the moves. 216 Move Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 217
command moves data from specified Physical Disks (PDs) to a temporary location selected by the system. SYNTAX movepdtospare [options] ... AUTHORITY • Super, Service, Edit • Any role granted the pd_movetospare right. NOTE: You need access to all domains in order to run this command. OPTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 218
The columns in the previous example are identified as follows: • Status. The overall status of the move. • normal. Indicates the chunklet has successfully moved with no loss of quality. • degraded. Indicates the chunklet has successfully moved with loss of quality. • failed. Indicates the chunklet - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 219
. SYNTAX moverelocpd [options] [[-...] AUTHORITY • Super, Service • Any role granted the pd_movereloc right. NOTE: You need or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (e.g. 1,2,3). A range of nodes is separated - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 220
-fc_gt 60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS [-]... Specifies that the chunklets that were relocated from specified disk (), are moved to the specified - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 221
it must be used at least once on the command line. If this specifier is repeated then the operation is performed on multiple disks. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES The following example moves chunklets that were on PD 8 that were relocated to another - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 222
• src_set_invalid. Source is in invalid set. • src_not_found. Source chunklet does not exist. • invalid_dest. Destination is invalid. • move_failed. Chunklet move failed. • disk_relocating. Disk is relocating. Degraded Information: • disks_reused_in_row. Disks reused in row. • connection_degraded. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 223
movetodomain DESCRIPTION The movetodomain command moves objects from one domain to another. SYNTAX movetodomain [options] AUTHORITY • Super, Edit • Any role granted the domain_moveto right. NOTE: You need access to all domains in order to run this command. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 224
The following example displays the removal of the host testhost from any domain: cli% movetodomain -host testhost -unset The following hosts will have their domain modified: Id Name Persona -WWN/iSCSI_Name- Port 2 testhost Generic Do you want to proceed with removing the domain of the above? - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 225
differences of the virtual copy to the specified RW parent in the same VV family tree. The default is to copy the differences to the base volume. This option cannot be used with the -halt option. -rcp Allows the promote operation to proceed even if the RW parent volume is currently - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 226
EXAMPLES The following example illustrates how virtual volume vv1 can be promoted with the differences from its base volume: cli% promotesv vv1 NOTES • Issue the showvv command to verify that differences in the snapshot volume are promoted to its target volume. • Issue the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 227
also removed. • The promotevvcopy command can also be used to clean up a failed physical copy. • Issue the showvv command to verify that promoted volume is a base volume. • After a physical copy has been promoted, the association between it and its parent volume is broken; the physical copy and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 228
be removed. SYNTAX removealert [option] -a|... AUTHORITY • Super, Service • Any role granted the alert_remove right. NOTE: You need :47 PDT 2005 Message code: 196609 Tue May 03 22:23:17 PDT 2005 Node: 0 Severity: Minor Firmware coredump event Firmware COREDUMP: recovered file /var/core/hba - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 229
131 - New Message code: 1114115 Thu May 05 00:11:25 PDT 2005 Node: 0 Severity: Minor Too many events are being logged Too many events are being Id 133 - New Message code: 1966081 Thu May 05 00:25:27 PDT 2005 Node: 0 Severity: Degraded Cage log event cage2-A, loop 1:0:2, cage time Thu May 5 00 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 230
removeaocfg DESCRIPTION The removeaocfg command removes specified Adaptive Optimization configurations from the system. AUTHORITY Super, Edit SYNTAX removeaocfg [options] {|}... OPTIONS -pat Indicates that specified patterns are treated as glob-style patterns and that - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 231
removecpg DESCRIPTION The removecpg command removes Common Provisioning Groups (CPGs) from the system or removes specific Logical Disks (LDs) from CPGs. AUTHORITY • Super, Edit • Any role granted the cpg_remove right. NOTE: You need access to all domains in order to run this command. SYNTAX - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 232
RESTRICTIONS • Access to all domains is required to run this command. • The removecpg command fails if any of the LDs, or the entire CPG, is in use by a Thinly Provisioned Virtual Volume (TPVV). EXAMPLES The following example displays the removal of CPG cpg1: cli% removecpg cpg1 NOTES • By default, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 233
removedomain DESCRIPTION The removedomain command removes an existing domain from the system. SYNTAX removedomain [option] AUTHORITY • Super • Any role granted the domain_remove right. Super NOTE: You need access to all domains in order to run this command. OPTIONS -f When using this - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 234
removedomainset DESCRIPTION The removedomainset command removes a domain set or removes domains from an existing set. SYNTAX removedomainset [options] [...] AUTHORITY • Super, Edit • Any role granted the domainset_remove right. OPTIONS -f Specifies that the command is forced. If - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 235
removehost DESCRIPTION The removehost command removes a system host or paths to a host. If one or more paths are specified, the command removes only those paths, otherwise the entire host definition is removed. SYNTAX removehost [options] [...|...] AUTHORITY • Super, Edit - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 236
NOTES • Removing an entire host definition by issuing the removehost command is not equivalent to removing all of the paths associated with a host. The latter leaves a host definition with no paths associated to it, whereas the former removes the entire host definition. • Verify the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 237
removehostset DESCRIPTION The removehostset command removes a host set or removes hosts from an existing set. SYNTAX removehostset [options] [...] AUTHORITY • Super, Edit • Any role granted the hostset_set right can remove a host set or hosts from a host set. OPTIONS -f Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 238
3PAR StoreServ Storage Concepts Guide for information on logging logical disks and preserved data logical disks. CAUTION: System resource logical disks are required for correct operation of the HP 3PAR storage system. Removal of system resource logical disks should be performed by qualified service - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 239
• Issuing the removeld command with the -pat option specified returns a request for confirmation to remove LDs, unless the -f option is specified. • Do not issue the removeld command while a movech, movech2spare, movepd2spare, or moverelocpd operation is being executed. Issue the showldch command to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 240
that the correct group to be removed has been selected before executing this command. RESTRICTIONS • This command requires the HP 3PAR Remote Copy Software license. Contact local service provider for further information. • This is not allowed if Remote Copy is in progress; the system will generate - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 241
EXAMPLES The following example removes Group1 from a Remote Copy system: # removercopygroup Group1 The following example removes Remote Copy groups that start with the name testgroup: # removercopygroup -pat testgroup* The following example removes the Remote Copy group group1 and retains the resync - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 242
. SPECIFIERS The target name for the target definition to be removed. RESTRICTIONS • This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. • A target definition cannot be deleted if it is being used by any group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 243
removesched DESCRIPTION The removesched command removes a scheduled task from the system. SYNTAX removesched [options] AUTHORITY • Super, Service, Edit • Any role granted the sched_remove right. OPTIONS -pat Specifies that certain patterns are treated as glob-style patterns and - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 244
removesnmpmgr DESCRIPTION The removesnmpmgr command removes preregistered SNMP managers from receiving alerts (traps). WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX removesnmpmgr [option ] AUTHORITY • Super • - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 245
EXIT STATUS The following codes are returned indicating success or failure: • 0 indicates that the trap manager host was removed and the command was successful. • 1 indicates that the command failed. • 2 indicates that the host is not on the list of registered hosts. NOTES • SNMP managers are - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 246
removesnmppw DESCRIPTION The removesnmppw command allows a user to remove SNMP access community string passwords. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX removesnmppw [options] AUTHORITY • Super • Any role granted the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 247
be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX removesnmpuser [options] AUTHORITY • Super, Service, Edit, Browse • Any role granted the snmpuser_remove right. OPTIONS -f Forces the operation so that the command does not require confirmation - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 248
list. SYNTAX removespare [options] ... AUTHORITY • Super, Service • Any role granted the spare_remove right. NOTE: You need access is acceptable. Chunklets specified that are not on the current service group spare list are ignored. SPECIFIERS ... The chunklet - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 249
EXAMPLES The following example removes a spare chunklet from position 3 on physical disk 1: cli% removespare 1:3 NOTES • Verify the removal of spare chunklets by issuing the showspare command. See "showspare" (page 479) for more information. • If a wildcard (a) is used or the -p flag is specified, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 250
authentication. SYNTAX removesshkey [... ] AUTHORITY • Super, Service, Edit, Browse • Any role granted the sshkey_remove right. : cli% removesshkey NOTES • After removing the user's SSH public key on the HP 3PAR Storage System, the user cannot use the SSH key authentication to log in. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 251
. SPECIFIERS ... Allows you to specify tasks to be removed using their task IDs. RESTRICTIONS None. EXAMPLES The following example shows how to remove a task based on the task ID. cli% removetask 2 Remove the following tasks? 2 select q=quit y=yes n=no: y removetask 251 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 252
details. cli% removetask -a Remove all tasks? select q=quit y=yes n=no: y NOTES • See the HP 3PAR StoreServ Storage Concepts Guide and HP 3PAR Command Line Interface Administrator's Manual for additional information and examples regarding task management and task management commands. • With this - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 253
removetemplate DESCRIPTION The removetemplate command removes one or more Virtual Volume (VV), Logical Disk (LD), and Common Provisioning Group (CPG) templates. SYNTAX removetemplate [options]{|}... AUTHORITY • Super • Any role granted the template_remove right. NOTE: You - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 254
removeuser DESCRIPTION The removeuser command removes a user account from the system. SYNTAX removeuser [option] ... AUTHORITY • Super • Any role granted the user_remove right. NOTE: You need access to all domains in order to run this command. OPTIONS -f Specifies that the command is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 255
removeuserconn DESCRIPTION The removeuserconn command removes user connections to the current system. AUTHORITY • Super • Any role granted the userconn_remove right. NOTE: You need access to all domains in order to run this command. SYNTAX removeuserconn [options] - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 256
LUN ID to remove. Specifies that exports to the specified port are removed. If this specifier is not used, the host_name specifier must be used. node Specifies the system port where node is a number from 0 through 7. 256 Remove Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 257
slot Specifies the PCI bus slot in the node where slot is a number from 0 through 5. port Specifies the FCS port number of the card in PCI bus slot using 1 through 4. Specifier requests - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 258
[options] |... • removevv -expired [options] [VV_name>|...] AUTHORITY • Super, Edit • Any role granted the vv_remove right can remove base volumes. • Any role granted the vvcopy_remove right can remove physical volumes. • Any role granted the sv_remove right can remove - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 259
Specifies the VV name, using up to 31 characters in length. This specifier can be repeated to remove multiple VVs. If this specifier is not used, the pattern specifier must be used. Specifies a glob-style pattern. This specifier can be repeated to remove multiple VVs. If this specifier is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 260
removevvset DESCRIPTION The removevvset command removes a VV set or removes VVs from an existing set. SYNTAX removevvset [options] [...] AUTHORITY • Super, Edit • Any role granted the vvset_remove right can remove a volume set or volumes from a volume set. OPTIONS -f Specifies that the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 261
Prepare an FC-AL module for removal. unstartfc Stop the startfc subcommand. See "NOTES" for additional information about the unstartfc subcommand. endfc Indicates that service on the drive cage is completed and allows the system to resume use of the FC-AL module. Both startfc and unstartfc need this - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 262
FC-AL specifier is ignored. • For DC3 drive cages, clearlog is not supported. OPTIONS -f Forces the operation. When this option is not used, the serviced. 0|1 Specifies the side of the specified DC2 or DC4 drive cage to be serviced. Specifies the name of the drive cage to be serviced - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 263
removal and replacement actions for a host connecting to an HP 3PAR Storage System port. SYNTAX The syntax for the servicehost command servicehost copy [-f] AUTHORITY • Super, Service • Any role granted the host_service right. NOTE: You need access - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 264
an inactive host from port 2:1:1: cli% servicehost remove 2:1:1 20000200000CF790 Removing inactive host 20000200000CF790 on port 2:1:1 Are you sure? select q=quit y=yes n=no: y NOTES None. 264 Service Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 265
> ] • servicemag clearstatus AUTHORITY • Super, Service • Any role granted the mag_service right. NOTE: You need access to all . The unmark option should not be used without consulting with HP 3PAR engineering. status Specifies that the status of the servicemag command - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 266
mode. This option is only valid for the start operation. -nodisks Specifies that the serviced drive magazine's disk drives are valid and do not need to be replaced. This . For a more accurate estimate, which will do runtime calculations based on the system load, use the servicemag status < - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 267
drive magazine within the specified drive cage to be serviced based on the side of the drive magazine and drive servicemag status command. EXAMPLES The following example displays the suspension and resumption of data services on drive magazine 0 in drive cage 2: cli% servicemag start -log -wait - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 268
log option, all chunklets on the disks in the drive magazine being serviced are marked as normal,smag. This state indicates an active servicemag operation magazine to destinations starting first with local (such as on the owning node for the logical disk) spares, then local free space, then remote - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 269
: You need access to all domains in order to run this command. SUBCOMMANDS start Specifies the start of service on a node. status Displays the state of any active servicenode operations. end Specifies the end of service on a node. OPTIONS -ps Specifies which power supply will be placed into - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 270
EXAMPLES In the following example, fan 1 on node 3 is put into servicing-mode: cli% servicenode -fan 1 3 NOTES None. 270 Service Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 271
22 Set Commands setalert DESCRIPTION The setalert command sets the status of system alerts. SYNTAX setalert new|ack|fixed {...|-a} AUTHORITY • Super, Service • Any role granted the alert_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -a Specifies that - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 272
; it must first be removed from one and then added to the second. • Active use of Adaptive Optimization requires an Adaptive Optimization license. Contact your HP representative for more information. 272 Set Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 273
EXAMPLES The following example changes the optimization bias (mode) of an AO configuration called aocfg1 to Performance. cli% setaocfg -mode Performance aocfg1 The following example sets the tier1 CPG for AO configuration aocfg2 to R5FCcpg. R5FCcpg must not already be used in an AO configuration, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 274
setauthparam DESCRIPTION The setauthparam command is used to set the authentication and authorization parameters. SYNTAX The syntax of the setauthparam command can be one of the following: setauthparam [-f] setauthparam [-f] ... setauthparam [-f] -clear < - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 275
. When the attribute does not end with a back slash, it is as described for the user-dn-base variable. sasl-mechanism When the binding is SASL, the SASL mechanism must be one supported by the LDAP server. The system allows the mechanisms of PLAIN, DIGEST-MD5, and GSSAPI. kerberos-server kerberos - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 276
no resulting domain name because ISDom= does not appear in the candidate. Table 5 Values for Specifiers and super-map service-map A group name that grants the user the Super role level if the user is a member of that group. Multiple group names can - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 277
during LDAP setup, see the LDAP chapter of the HP 3PAR Command Line Interface Administrator's Manual. NOTES • Users who have been provided with determine the user's role level. • When HP 3PAR Domains are enabled, you can only have Super or Service roles for the domain all. Any other domain names are - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 278
> setbattery [options ] AUTHORITY • Super, Service • Any role granted the battery_set right. NOTE: You need access to supply number on the node using either 0 (left side from the rear of the node) or 1 (right side from the rear of the node). Specifies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 279
EXAMPLES The following example resets the battery test log and the recharging time for a newly installed battery on node 2, power supply 1, and battery 0, with an expiration date of July 4, 2010: cli% setbattery -x 07/04/2010 2 1 0 NOTES To view battery status information, issue the showbattery - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 280
left-top) ps Sets the model of a cage power supply, where is a model name to be assigned to the power supply by service personnel. This model name appears in the Model column of the showcage -d command output. OPTIONS None. SPECIFIERS Indicates the name of the drive cage - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 281
NOTES • The parameters specified by the setcage command appear in the showcage -d output (see "showcage" (page 361)). • The power supply model cannot be modified if the information is automatically retrieved from the system. setcage 281 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 282
numbers associated with these two protocols. In addition, it allows users to enable or disable the SLP port. SYNTAX setcim [options] AUTHORITY • Super, Service • Any role granted the cim_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -f Forces the operation of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 283
EXAMPLES To disable the HTTPS ports: cli% setcim -https disable Warning: The CIM server is active and will restart. Are you sure you want to continue (Y/N)? Y To enable the HTTPS port and set the HTTPS port number to 49153: cli% setcim -https enable -httpsport 49153 Warning: The CIM server is active - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 284
SYNTAX setclienv AUTHORITY • Super, Service, Edit, Browse • Any role granted the clienv_set The data sorting will be within the rows. NOTE: This parameter is only supported when connected via SSH. Specifies the command line editing mode. Enter one of the following - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 285
EXAMPLES In the following example, the CLI environment is set to display domains information: cli% setclienv listdom 1 NOTES This command is only available when you are using a CLI shell or SSH. setclienv 285 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 286
SYNTAX setcpg [options ] AUTHORITY • Super, Edit, Service • Any role granted the cpg_set right. NOTE: You need access to operation. The default and minimum growth increments vary according to the number of controller nodes in the system. If is non-zero it must be 8G or bigger. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 287
Table 6 Growth Increment Per Number of Nodes (continued) Number of Nodes Default 5-6 96 GB 7-8 128 GB Minimum 24 is a function of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine (mag). If no availability - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 288
hyphen (0-7). The primary path of the disks must be on the specified node(s). -st Specifies one or more PCI slots. Slots are identified used to select the disks that are used to create common provisioning groups based on the characteristics of the disk. -tc_gt Specifies that physical - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 289
-fc_gt 60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and connected to node 2 through their primary path. -sax [,...] Specifies that the logical disk, as identified with the argument, used for snapshot administration - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 290
nearline (NL), or solid state drive (SSD)). This implies that, within a CPG, one can have logical disks of type FC, type NL, and type SSD. However, this is only permitted so that, if a user wants to change the type of a CPG from FC to NL or SSD, they can first change the new logical disk creation - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 291
you to set the system time and date on all nodes. SYNTAX The syntax for the setdate command can be one of the following: • setdate [[]][] • setdate -tzlist [group] • setdate -tz AUTHORITY • Super, Service • Any role granted the date_set right. NOTE: You need access - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 292
be provided in one of the combinations listed as follows when issuing the setdate command: • MMDDhhmm • MMDDhhmmYY • MMDDhhmmCCYY • MMDDhhmm.ss • MMDDhhmmYY.ss • MMDDhhmmCCYY.ss • Check node dates by issuing the showdate command. See "showdate" (page 373) for additional information. 292 Set Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 293
setdomain DESCRIPTION The setdomain command sets the parameters and modifies the properties of a domain. SYNTAX setdomain [options ] AUTHORITY • Super • Any role granted the domain_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -name - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 294
NOTES For moving objects into a domain, use the movetodomain command. 294 Set Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 295
setdomainset DESCRIPTION The setdomainset command sets the parameters and modifies the properties of a domain set. SYNTAX setdomainset [options ] AUTHORITY • Super, Edit • Any role granted the domainset_annotate right can only annotate the comment of a domain set. • Any role granted - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 296
removechap [-target] [-f] {|}... • sethost clearagent • sethost rst • sethost rst -wwn • sethost rst -iscsi_name AUTHORITY • Super, Edit • Any role granted the host_set right. NOTE: You need access - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 297
name. If this option is not specified, then the initiator CHAP name defaults to the host name and the target CHAP name defaults to the HP 3PAR system name. -hex The CHAP secret is treated as a hex number. The following options are for use with the removechap subcommand: -target Removes only the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 298
reset or for which host agent data should be cleared. node - Specifies the node using a number from 0 through 7. slot Specifies the PCI slot in the specified node. Valid ranges are: • 0 - 9 for the StoreServ 10000 storage system platform • 0 - 5 for the S and T-Class storage system - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 299
sethostset DESCRIPTION The sethostset command sets the parameters and modifies the properties of a host set. SYNTAX sethostset [options ] AUTHORITY • Super, Edit • Any role granted the hostset_annotate right can only annotate the comment of a host set. • Any role granted the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 300
license key information. SYNTAX setlicense [options ] AUTHORITY • Super, Service • Any role granted the license_set right. NOTE: You need access to is associated with the number of nodes in the system for which the license key is being entered. • HP 3PAR's license terms and conditions must be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 301
NOTES • This command prompts for a new license key. To finish entering the license key, press enter on a blank line. • When the license key is being interpreted, all characters other than letters (without case-sensitivity) and numbers are ignored, and the letters are not case-sensitive. • After the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 302
setnet DESCRIPTION The setnet command sets the administration network interface configuration. AUTHORITY • Service, Super • Any role granted the net_set right. NOTE: You need access to all domains in order to run this command. SYNTAX The syntax for the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 303
Forces the system to change which node has an active Ethernet interface. If a node ID is specified, it switches to that node. Otherwise, any node with a connected Ethernet interface is chosen. WARNING! If successful, this command causes any HP 3PAR management application clients currently connected - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 304
interface is either auto negotiated (auto), or specified manually using the and specifiers. subcommand. Specifies the IP address of the node. This specifier can only be used with the failoverping the HP 3PAR CLI is running on is not on the same subnet as the HP 3PAR storage - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 305
NOTES • If successful, this command causes any CLI or GUI clients currently connected to lose their connection. • To make it possible to change the network configuration without running the risk of losing contact with the system because of misconfiguration, the setnet command uses a two step process - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 306
setnode DESCRIPTION The setnode command sets the properties of the node components such as the serial number of the power supply. AUTHORITY • Super, Service • Any role granted the node_set right. NOTE: You need access to all domains in order to run this command. SYNTAX setnode ps [options] < - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 307
cli% cli% setnode ps 0 -s aabbccdd 1 cli% shownode -ps Node PS -Serial- -PSState-- FanState ACState DCState -BatState- ChrgLvl(%) 0 0 -- NotPresent -- -- -- NotPresent 0 0 1 12345678 OK OK OK OK OK 100 1 0 AABBCCDD OK OK OK OK OK 100 1 1 -- NotPresent -- -- -- - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 308
deprecated and will be removed in a subsequent release. AUTHORITY • Super, Service • Any role granted the ntp_set right. NOTE: You need access to all NTP server to which the HP 3PAR storage system synchronizes its internal clocks. none Specifies that the HP 3PAR storage system should not synchronize - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 309
command allows a user with Super level role to change the password for any user and create a password file on a client. Edit-, browse-, or service-level users can use the setpassword command to change their own passwords or save their password files on a client. SYNTAX setpassword [options - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 310
command. Until the SSH key is removed the user will not have to provide the new password. • For additional information about password files, see the HP 3PAR StoreServ Storage Concepts Guide and the HP 3PAR Command Line Interface Administrator's Manual. 310 Set Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 311
The setpd command marks a Physical Disk (PD) as allocatable or non allocatable for Logical Disks (LDs). SYNTAX setpd ldalloc on|off ... AUTHORITY • Super, Service • Any role granted the pd_set right NOTE: You need access to all domains in order to run this command. SUBCOMMANDS ldalloc on|off - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 312
setqos DESCRIPTION The setqos command creates and updates QoS rules in a system. SYNTAX The syntax for the setqos command can be one of the following examples: • setqos [options] [{vvset:{|}|sys:all_others}]... AUTHORITY • Super, Edit • Any role granted the qos_set right can set QoS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 313
useful to specify -vv * in the command line. QoS rules only manage host I/O. Use of this command to create new QoS rules requires a Quality of Service license. Contact your local HP representative for information. setqos 313 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 314
setrcopygroup DESCRIPTION The setrcopygroup command performs the following actions: • Sets the policy of the Remote Copy volume group for dealing with I/O failure and error handling. • Switches the direction of transfer between volume groups. • Sets a resynchronization period for volume groups in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 315
and secondary volumes are consistent and the host persona of the host must support Asymmetric Logical Unit Access (ALUA). • recover - Used for groups on that are switched from primary to secondary not be promoted to the base volume. When used with the failover specifier, it indicates that snapshots - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 316
promoted to the base volume in the case where all volumes of the group were not synced to the same time point. The incorrect use of this option can - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 317
mode. Failsafe mode requires that the Remote Copy group be started manually using the startrcopygroup command. no_auto_recover Specifies that if the Remote Copy • This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for further information. • - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 318
fail_wrt_on_err and no_fail_wrt_on_err policies. These policies were deprecated in HP 3PAR OS release 3.1.1. • An earlier version of this volumes when the primary system went down. • The switchover command is only supported for synchronous remote copy groups that are started and synced. The command - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 319
setrcopytarget DESCRIPTION The setrcopytarget command sets the name, policies, or throughput definition for the target's links. SYNTAX The syntax for the setrcopytarget command can be one of the following: • setrcopytarget pol • setrcopytarget name • - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 320
recovery from an unusual error condition and only used after consulting your HP representative. The new name for the indicated target. This . RESTRICTIONS • This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for further information. • If - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 321
the configurations into alignment. After being corrected the mirror_config policy should be immediately restored. Such operations should generally only be undertaken on the advice of a HP representative. setrcopytarget 321 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 322
name of currently scheduled tasks. SYNTAX setsched [options ] setsched [-suspend | -resume] setsched [-suspend_all | -resume_all] AUTHORITY • Super, Service, Edit • Any role granted the sched_setany right can set any user scheduled task properties. • Any role granted the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 323
EXAMPLES None. NOTES None. setsched 323 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 324
31 characters. The user name must be enabled for SNMPv3 with the createsnmpuser command. -version Integer value that specifies the SNMP version supported by the manager. Use "2" for SNMPv2 and "3" for SNMPv3. The default is "2". SPECIFIERS Specifies the IP address of the host - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 325
identified by the IPv4 address 123.45.67.89: cli% setsnmpmgr -snmpuser john -version 3 123.45.67.89 NOTES The storage system does not support any form of name resolution. You must specify these IP addresses directly. Issue the addsnmpmgr command to add an SNMP manager. Issue the showsnmpmgr command - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 326
setsnmppw DESCRIPTION The setsnmppw command allows a user to update SNMP access community strings passwords. The SNMP password is required for the system manager to send requests to the SNMP agent. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 327
NOTES • The default initial read/write password is public. • If the read-only or write-only passwords do not exist, they are created. • Verify SNMP passwords by issuing the showsnmppw command. See "showsnmppw" (page 474) for more information. setsnmppw 327 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 328
of the storage system. SYNTAX setsnmpuser AUTHORITY • Super, Service, Edit, Browse • Any role granted the snmpuser_set right. OPTIONS . The generated key is 160-bit in length. Only HMAC-SHA-96 is supported for authentication protocol and only CFB128-AES-128 for privacy protocol. If a key - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 329
the key and paste it. After setting the SSH public key on the HP 3PAR storage system, the user can use the corresponding private key to log on key if any. SYNTAX setsshkey [options] AUTHORITY • Super, Edit, Browse, Service • Any role granted the sshkey_set right. OPTIONS -add Specifies that the given - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 330
NOTES • Issuing the setsshkey command results in the system prompting for your SSH public key. Copy and paste the key using the aforementioned ASCII editor on the command line and then press ENTER. • After setting the SSH public key on the system, use the corresponding private key to log on without - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 331
setstatch DESCRIPTION The setstatch command starts and stops the statistics collection mode for chunklets. SYNTAX setstatch start|stop AUTHORITY • Super, Edit • Any role granted the statch_set right. SUBCOMMANDS start|stop Specifies that the collection of statistics is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 332
setstatpdch DESCRIPTION The setstatpdch command sets the statistics collection mode for all in-use chunklets on a Physical Disk (PD). SYNTAX setstatpdch start|stop AUTHORITY • Super, Edit • Any role granted the statpdch_set right. SUBCOMMANDS start|stop Specifies that the collection of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 333
on. The command also enables you to set system-wide parameters such as the raw space alert. SYNTAX setsys [options] setsys AUTHORITY • Super, Service • Any role granted the sys_set right. NOTE: You need access to all domains in order to run this command. OPTIONS The following option is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 334
are disabled using this parameter. The value must be either enable or disable. Default ports 2540 and 2550 were deprecated in the 2.2.4 release and support for them will be removed in a future release. NOTE: The server must be restarted for changes made with the MgmtOldPorts parameter to take effect - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 335
partner ports. If enabled, automatic failover is triggered when a node goes down. can be 'yes' or 'no '. AllowR5onNLDrives Enables or disables support for RAID-5 on NL drives. If disabled, new RAID-5 CPGs cannot be created on NL drives. HP strongly recommends RAID-6 for high-capacity - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 336
setsysmgr DESCRIPTION The setsysmgr command sets the system manager startup state. CAUTION: Issuing the setsysmgr command can potentially remove the entire state of the system causing data loss. SYNTAX The syntax of the setsysmgr command can be one of the following: • setsysmgr wipe [-f] [ - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 337
Specifies the ID of the system to be started. Specifies the table of contents generation number for the system to start with. Specifies the disk quorum for the system to start with. RESTRICTIONS • Access to all domains is required to run this command. • Use this - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 338
to set priority on task 497? select q=quit y=yes n=no: y high priortiy is set on task id: 497 NOTES • Physical copy or promotesv tasks are supported. Setting priority on other types of tasks will result in an error. • Task priorities can only be set one at a time. • If the specified task - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 339
only be replaced by specifying either -nrw or -nro before the -remove option. EXAMPLES • The following example displays template vvtemp1 modified to support the availability of data should a drive magazine fail (mag) using the stale_ss policy: cli% settemplate -ha mag -pol stale_ss vvetemp1 • In the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 340
NOTES • All options available for the createald, createaldvv, createcpg, and createtpvv commands can be used with the settemplate command to modify an existing template. • Options preceded with -remove are removed from an existing template. • When adding options to a template, specify the option - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 341
user () to the specified domain () at the specified role level (). Permitted values for are Super, Edit, Browse and Service. -rmdomain [,...] Remove the user from each domain with a name that matches one or more of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 342
setuseracl DESCRIPTION The setuseracl command sets the Access Control List (ACL). SYNTAX setuseracl [options] []... AUTHORITY • Super, Edit • Any role granted the useracl_set right. OPTIONS -add Adds names or patterns of objects at the end of an existing ACL. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 343
The following example shows how to remove vv3 from the ACL for user testuser1: cli% setuseracl -remove testuser1 updatevv vv3 The following example shows how to clear the ACL for user testuser1: cli% setuseracl testuser1 updatevv "" NOTES • The -add and -remove options are mutually exclusive. • If - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 344
• Any role granted the vv_set right can edit the properties of base volumes. • Any role granted the vvcopy_set right can edit the properties time value. NOTE: The -retain option requires the HP 3PAR Virtual Lock license. Contact your local service provider for more information. NOTE: If the volume - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 345
with a Thin Persistence license, reclaims allocated space when zero blocks are written to a TPVV. This policy is applicable for base TPVVs. • no_zero_detect - Disables the HP 3PAR storage system to scan for zeros in the incoming write data to reclaim allocated space on the volume. Multiple policies - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 346
This option returns a user space allocation warning. It generates a warning alert when the reserved user space of the TPVV exceeds the specified percentage of the virtual volume size. -usr_al This option returns the user space allocation limit. The user space of the TPVV is prevented from - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 347
. • To view policies assigned to the system's virtual volumes, issue the showvv -pol command. • Changing the CPG for a TPVV is not allowed. • See the HP 3PAR Management Console Help or the HP 3PAR Command Line Interface Administrator's Manual for instructions on creating CPGs and volumes. setvv 347 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 348
setvvset DESCRIPTION The setvvset command sets the parameters and modifies the properties of a Virtual Volume (VV) set. SYNTAX setvvset [options ] AUTHORITY • Super, Edit • Any role granted the vvset_annotate right can only annotate the comment of a volume set. • Any role granted the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 349
-https enable|disable Enables or disables the HTTPS port. SPECIFIERS None. EXAMPLES To disable the HTTPS port: cli% setwsapi -https disable WARNING: The Web Services API server is active and will restart. Are you sure you want to continue (y/n)? y NOTES Access to all domains is required to run this - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 350
For customer alerts, the message text will be truncated if it is too long unless the -wide option is also specified. -svc Specifies that only service alerts are displayed. This option can only be used with the -d or -oneline formatting options. -wide Do not truncate the message text. Only valid for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 351
Time : 2008-07-17 20:15:31 PDT Severity : Informational Type : Cluster shutdown after system recovery completion Message : System recovery completed for node 0 (reason Power Loss) 2 alerts NOTES • Set the status of alerts by issuing the setalert command. See "setalert" (page 271) for more - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 352
showaocfg DESCRIPTION The showaocfg command shows Adaptive Optimization (AO) configurations in the system. SYNTAX showaocfg [options [...|...] AUTHORITY Any role in the system. OPTIONS -domain Shows only AO configurations that are in domains - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 353
showauthparam DESCRIPTION The showauthparam command shows authentication parameters. SYNTAX showauthparam AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following is example output from the showauthparam command: cli% showauthparam Param Value - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 354
number, and so on. This option must be used with the -i option and it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS ... Displays the battery information for the specified node ID(s). Node_ID is an integer from 0 through 7. This specifier is not required. 354 Show - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 355
No No 1 0 0 -- NotPresent -- -- No No 1 1 0 -- NotPresent -- -- No No The columns in the previous example are identified as follows: • Node. The controller node number. • PS. The power supply number. • Bat. The battery ID. • Serial. The battery serial number. • State. The current status - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 356
01 14:50:54 PDT 2007 1 1 0 8 Passed 1 Tue May 15 14:51:59 PDT 2007 1 1 0 9 Passed 1 Tue May 29 14:53:25 PDT 2007 • Node. The controller node number. • PS. The power supply number. • Bat. The battery ID. • Test. The current status of the battery. • Result. The battery status, shows as passed - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 357
" (page 278) for more information. • For the E-Class and F-Class Storage Servers, the Power Supply 0's primary node is 0 and its secondary node is 1. The Power Supply 1's primary node is 1 and its secondary node is 0. The primary node can read and modify the power supply's properties. The secondary - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 358
showblock DESCRIPTION The showblock command displays block mapping information for Virtual Volumes (VVs), Logical Disks (LDs), and Physical Disks (PDs). SYNTAX showblock [options ] [] AUTHORITY Any role in the system. OPTIONS -d Specifies that detailed information is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 359
The following example displays detailed block mapping information for block 0 in the user space of VV admin: cli% showblock -d vv admin usr 0 VV/LD Name Block Region VV usr: admin 0x00000000 0x00000000-0x0007FFFF (0-256MB) LD : admin.usr.0 0x00000000 0x00000000-0x0007FFFF (0-256MB) PD Chnk - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 360
NOTES None. 360 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 361
serial number, spare part number, and so on. This option must be used with the -i option and it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS ... Specifies a drive cage name for which information is displayed. This specifier can be repeated to display information - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 362
columns in the previous example are identified as follows: • Id. The cage number. • Name. The name of the cage. • LoopA. The position of the controller node port to which the cage's A port (the top port) is connected. • Pos.A. Indicates how closely connected the cage's A port is to the controller - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 363
Interface Board Info LoopA LoopB Firmware_status Current Current Product_Rev 03 03 IFC_State OK OK ESH_State OK OK Master_CPU Yes No Loop_Map valid valid Link_Speed 2Gbps 2Gbps Port0_State OK OK Port1_State No_SFP No_SFP Port2_State No_SFP No_SFP Port3_State No_SFP No_SFP Power - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 364
(Power Supply Failed, Power Supply AC Failed) NOTES The power supply model, as shown in the Model column of the showcage -d output, is set by service personnel using the setcage command, as described in "setcage" (page 280). 364 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 365
-HTTP-- HTTPPort -HTTPS- HTTPSPort PGVer CIMVer Enabled Active Enabled 427 Enabled 5988 Enabled 5989 2.5.1 2.3.1 Where the columns are defined as: • Service. Indicates the CIM server status. ◦ --. Cannot determine the CIM server status. ◦ Enabled. The CIM server is running. ◦ Disabled. The CIM - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 366
• HTTP. Indicates the HTTP port state. ◦ --. Cannot determine the HTTP port state. ◦ Enabled. HTTP port is enabled. ◦ Disabled. HTTP port is disabled. • HTTPPort. HTTP port (1024 - 65635). The default value is 5988. • HTTPS. The HTTPS port state. ◦ --. Cannot determine the HTTPS port state. ◦ - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 367
showclienv DESCRIPTION The showclienv command displays the CLI environment parameters. SYNTAX showclienv AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the currently set CLI environment variables for sample system - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 368
showcpg DESCRIPTION The showcpg command displays Common Provisioning Groups (CPGs) in the system. SYNTAX showcpg [options ] [...|...] AUTHORITY Any role in the system. OPTIONS The following options cannot be used together with other options except -hist and -domain: -d Show - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 369
EXAMPLES The following example displays a system's CPGs: cli% showcpg MB -Volumes- -Usage- --- Usr --- --- Snp --- -- Adm --- Id Name Warn% VVs TPVVs Usr Snp Total Used Total Used Total Used 0 cpg1 - 2 0 2 1 15360 15360 32768 0 8192 0 1 cpg2 - 2 2 0 2 0 0 32768 1024 8192 256 2 cpg3 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 370
• Warn%. The CPG's allocation warning threshold. • Volumes. Virtual Volumes (VVs) and Thinly Provisioned Virtual Volumes (TPVVs). • VVs. The Number of VVs (including TPVVs) using the CPG. • TPVVs. The number of TPVVs using the CPG. • Usage. Virtual Volumes using the CPG. • Usr. The number of VVs - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 371
1 cpg2 - 32768 - 2 cpg3 - 32768 - 3 cpg4 - 32768 - - - - - - 8192 - - - - - 8192 - - - - - 8192 - - - - The columns in the previous example are identified as follows: • Id. The physical disk ID. • Name. The name of the common provisioning group. • Warn%. The allocation warning percentage - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 372
up because the growth is done by creating LDs that must be created in units of the LD RAID set size. See the HP 3PAR Command Line Interface Administrator's Guide for further details. • For this command: 1 MB = 1048576 bytes. • A Domain column can be included by using the setclienv command to set - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 373
None. EXAMPLES The following example displays the date and time for the system node: cli% showdate Node Date 0 Mon Apr 17 17:07:44 PDT 2007 (US/Pacific) :44 PDT 2007 (US/Pacific) NOTES Set date and time information on nodes by issuing the setdate command. The output of the showdate command include an - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 374
] AUTHORITY Any role in the system. OPTIONS -d Specifies that detailed information is displayed. -sortcol [,][:[,]...] Sorts command output based on the column number . Columns are numbered from left to right, beginning with 0. At least one column must be specified. In - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 375
NOTES If the VVRetentionTimeMax is--, then the minimum volume retention time for the system is used instead. If the VVRetentionTimeMax is 0, then the volume retention time in the domain is disabled. showdomain 375 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 376
showdomainset DESCRIPTION The showdomainset command lists the host sets defined on the HP 3PAR storage system and their members. SYNTAX showdomainset [options] [...] showdomainset -domain [options] [...] AUTHORITY Any role in the system. OPTIONS -d Show a - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 377
Show domain sets containing domains matching the pattern domainset.*: cli% showdomainset -domain domainset.* Id Name Members 7 domainset domainset.1 domainset.2 NOTES None. showdomainset 377 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 378
joined the cluster be displayed. If this option is used, it must be followed by a list of nodes. SPECIFIERS ... Specifies the node ID for which EEPROM log information is retrieved. Multiple node IDs are separated with a single space (0 1 2). If no specifiers are used, the EEPROM log for all - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 379
18 11:38:31 2008 Code 15 (PCI_Fibre_Failure) - Subcode 0x0 (5) Tue Jan 15 18:49:06 2008 In the example above: • Board revision indicates the HP 3PAR part number for the node board, including any minor revision codes. • Assembly indicates the code of the assembly, the year or week the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 380
• Last panic displays the last time another node in the cluster requested this node to take a panic. • Error ignore code is for engineering use only. • SMI context is for engineering use only. • Last HBA mode contains PCI Fibre port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 381
showeventlog DESCRIPTION The showeventlog command displays the current system event log. SYNTAX showeventlog [options ] AUTHORITY Any role in the system. OPTIONS -min Specifies that only events occurring after the specified number of minutes are shown. The is an integer from 1 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 382
the specified pattern(s) are displayed. -node Specifies that only events from nodes that match the specified pattern(s) are displayed do not match the specified pattern(s), are displayed. SPECIFIERS None. RESTRICTIONS The HP 3PAR OS stores 30 MB of event logs in segments of 3 MB each. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 383
died Process /opt/tpd/bin/tpdtcl /opt/tpd/bin/tpdtcl.tcl has died on node 0 Fri Sep 5 19:42:04 2003 PST 0 1155 Status change Informational Change using the -comp option: cli% showeventlog -debug -min 5 -comp rmm NOTES The HP 3PAR OS stores 30 MB of event logs in segments of 3 MB each. When one 3 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 384
and past firmware entries are displayed. If not specified, only current entries are displayed. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 385
HITACHI [JLAK] DK..CJ-36FC Current /opt/tpd/fw/drive/MCJF_LAK.BIN HITACHI [JLAK] DK..CJ-72FC Current /opt/tpd/fw/drive/MCJF_LAK.BIN HITACHI [GLAK] DK..CJ-18FC Current /opt/tpd/fw/drive/MCJF_LAK.BIN HITACHI [GLAK] DK..CJ-36FC Current /opt/tpd/fw/drive/MCJF_LAK.BIN HITACHI [GLAK] DK..CJ- - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 386
for hosts such as Egenera and NetApp. • NACA. Enables Normal Auto Contingent Allegiance (NACA) bit for AIX. • SESLun. Enables SCSI Enclosure Services (SES) LUN for host agent support. -noname Shows only host paths (WWNs and iSCSI names) that are not assigned to any host. This option cannot be used - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 387
Shows only hosts that are in domains or domain sets that match one or more of the specifier or set: arguments. The set name must start with set:. This option does not allow listing objects within a domain of which the user is not a member. SPECIFIERS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 388
0 queasy10 queasy10 1 foo -- s019 -- The following example displays all host information: cli% showhost -verbose Id Name Persona -----WWN/iSCSI_Name----- Port IP_addr 0 queasy10 Generic 210000E08B027B60 0:0:1 n/a 1 foo Generic myiscsipath.3pardata.com --- 0.0.0.0 Id Name - - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 389
showhostset DESCRIPTION The showhostset command lists the host sets defined on the HP 3PAR storage system and their members. SYNTAX showhostset [options] [...] showhostset -host [options] [...] AUTHORITY Any role in the system. OPTIONS -d Show a more detailed - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 390
Show the host sets containing host sun40z-09-0: cli% showhostset -host sun40z-09-0 Id Name Members 3 sunv40z-09 sunv40z-09-0 sunv40z-09-1 sunv40z-09-2 sunv40z-09-3 NOTES A Domain column may be included by using the setclienv command to set listdom to 1. The listdom option is also set to 1 if - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 391
it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS None. RESTRICTIONS None. EXAMPLES None. NOTES The inventory is divided into sections and inventory for each of these sections can be shown separately with the following commands: Section Node - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 392
system. OPTIONS -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to the example above: • N:S:P. The port location in Node:Slot:Port format, where Slot is the PCI slot number in the node and Port is the port number in the PCI - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 393
• iSCSI_Name. The iSCSI name of the host. • StartTime. The time the session was started. NOTES None. showiscsisession 393 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 394
the command output or for a more global solution, set the TPDLISTDOM environment variable. -sortcol [,][:[,]...] Sorts command output based on the column number . Columns are numbered from left to right, beginning with 0. You must specify a column number. In addition, you - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 395
Pattern" (page 12) for more information. RESTRICTIONS None. EXAMPLES The following example displays information for all LDs in a two node system: cli% showld Id Name WThru MapV 0 log0.0 Y N 1 log1.0 Y N 2 pdsld0.0 Y N 3 admin.usr.0 N Y 4 admin.usr.1 N Y 5 VV111.usr.0 N Y 6 VV111.usr.1 N Y RAID - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 396
status of the logical disk. ◦ normal. The logical disk has started and is available for use. ◦ orphan. Both the primary owner and backup owner nodes are down, and the logical disk's data is not available. ◦ preserved. Some disks used by the logical disk are missing. Data belonging to the logical - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 397
for RAID-0, 1 is for RAID-1, 5 is for RAID-5, and 6 is for RAID-6). • Own. The first number is the logical disk owner node, and the second number is the logical disk backup node. • SizeMB. The total size of the logical disk, in MB. • RSizeMB. The logical disk's raw size, in MB. • RowSz. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 398
The following example displays policy information about all system LDs: cli% showld -p Id Name Keep_Preserved Growth_Blocked Dev_Type RPM 0 log0.0 0 0 FC 10 1 log1.0 0 0 FC 10 2 pdsld0.0 0 0 FC 10 3 pdsld0.1 0 0 FC 10 4 pdsld0.2 0 0 FC 10 5 admin.usr.0 1 0 FC 10 6 admin. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 399
in degraded state. • Detailed_State. The detailed state of the LD that is one of the following: ◦ nodes_unavail. The nodes are down. ◦ not_stated. The LD has stopped and needs to be manually started (see startld command). ◦ unavail. The LD state not available. ◦ preserved. One or more sets of the LD - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 400
showldch DESCRIPTION The showldch command displays configuration information about the chunklet mapping for one Logical Disk (LD). SYNTAX showldch [options ] AUTHORITY Any role in the system. OPTIONS -degraded Show only the chunklets in sets that cause the LD availability to be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 401
3 0 1 1:3:0 28 4 0 2 0:1:2 6 5 0 2 2:1:3 39 6 0 3 0:2:0 8 7 0 3 1:2:2 26 8 0 4 2:3:3 47 9 0 4 1:1:2 22 10 0 5 2:2:3 43 11 0 5 0:3:0 12 12 0 6 0:0:0 0 13 0 6 1:0:2 18 14 0 7 2:0:1 33 15 0 7 2:0:2 34 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 normal 0 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 402
• Media. The current status of the physical disk medium for the chunklet. ◦ valid. The chunklet is available for use. ◦ failed. The medium has encountered errors and is not available for use. • Sp. The spare status of the chunklet; Y indicates the chunklet is used for spare, N indicates the chunklet - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 403
4 0 47-2:3:3 18-1:0:2 14-0:3:2 33-2:0:1 4 1 2-0:0:2 28-1:3:0 37-2:1:1 22-1:1:2 NOTES None. showldch 403 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 404
showldmap DESCRIPTION The showldmap command displays the mapping from a Logical Disk (LD) to Virtual Volumes (VVs). SYNTAX showldmap AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS Specifies the LD name. RESTRICTIONS None. EXAMPLES The following example displays the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 405
showlicense DESCRIPTION The showlicense command displays the currently installed license key and current license information. SYNTAX showlicense AUTHORITY Any role in the system. OPTIONS -raw Specifies that the license key originally entered (the raw license) be displayed. The license key is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 406
SV47-NH2R-BL1L-TJKR-31F2-V9QX-0WM0-AWTH LRB7-8XQD-BLHD-LF68-A4BW-K4QG-ZS7B-Q41X 35Y1-6CZC-KBJ5-6VQE-EC2G-Q6EG-SJV0-KMHC SAWG-YJ4V-WRE5-3GZA-DGW0-ZYVE-5SVT-8TJX QR9W-R92D-SSTY-RVWY-1Y2B-YH8D-KRN5-ZZ7Y... NOTES Without options, a description of which features are enabled is displayed. When the license - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 407
: 0 TX Packets: TX Bytes: TX Errors: TX Dropped: TX FIFO Errors: TX Collisions: TX Carrier Errors: TX Compressed: Remote copy interface in slot 1 on node 0 MAC Address: 00:04:23:C2:1B:72 RX Packets: 0 TX Packets: RX Bytes: 0 TX Bytes: RX Errors: 0 TX Errors: RX Dropped: 0 TX Dropped - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 408
: RX Multicast: RX Compressed: 0 TX Bytes: 0 TX Errors: 0 TX Dropped: 0 TX FIFO Errors: 0 TX Collisions: 0 TX Carrier Errors: 0 TX Compressed: Admin interface on node 1 MAC Address: 00:02:AC:43:00:33 RX Packets: 477147 RX Bytes: 59353196 RX Errors: 0 RX Dropped: 0 RX FIFO Errors: 0 RX - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 409
Any role in the system. OPTIONS The following options are for node summary and inventory information: -listcols List the columns available to be names are shown in the header. Run shownode -listcols to list Node component columns. Run shownode -listcols to list columns associated - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 410
so on. This option must be used with the -i option and it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS ... Displays the node information for the specified node ID(s). This specifier is not required. Restrictions None. EXAMPLES The following example displays the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 411
partitions, is rebooting, or has shutdown. • Master. Specifies is the node is the master node. • InCluster. Indicates if the node is in the cluster. • LED. The node LED information. Values are as follows: ◦ --. The node LED is unknown. ◦ off. The node LED is off. ◦ Green. The kernal is not running - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 412
described in detail in the following examples. cli% shownode -mem Node Riser Slot SlotID -Name-- -Usage- --Type--- --Manufacturer--- -Serial .0 Data DDR_SDRAM Micron Technology E010DF69 CL2.0/2.5 2048 In the example above: • Node. The node ID. • Riser. The location of the DIMM. The DIMM may be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 413
MB. • Type. The type of disk drive. cli% shownode -pci PCI Cards Node Slot Type -Manufacturer- -Model- -Serial- -Rev- Firmware 0 0 FC QLOGIC 2302 3.3.16 1 0 FC QLOGIC 2302 C31037 1 3.3.16 In the example above: • Node. The node ID. • Slot. The slot ID. • Type. The PCI card type, either - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 414
NotPresent 0 0 1 OK OK OK OK OK 100 1 0 OK OK OK OK OK 100 1 1 NotPresent -- -- -- NotPresent 0 In the example above: • Node. The node ID. • PS. The power supply ID. • PSState. The power supply state. Values are as follows: ◦ --. Cannot determine the state. ◦ OK. The power supply - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 415
node CPU overheating. ◦ cpu_vrm_overheating. The node CPU VRM overheating. ◦ control_cache_dimm_overheating. The node Control Cache DIMM is overheating. ◦ node_offline_due_to_failure. The node is offline due to failure. ◦ node_shutdown_manually. The node was shutdown manually. ◦ unknown. The node - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 416
The following example displays the detailed state of the power supplies: cli% shownode -ps Node PS -State- -Detailed_State- 0 0 OK OK 1 1 OK OK 2 2 OK OK 3 3 OK OK In the example above: • Node. The node ID. • PS. The power supply ID. • State. The power supply state. Values are as follows: - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 417
temperatures. SYNTAX shownodeenv [options ...] AUTHORITY Any role in the system. OPTIONS -n ... Specifies the ID of the node whose environment status is displayed. Multiple node IDs can be specified as a series of integers separated by a space (1 2 3). If no option is used, then the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 418
LM87 Ext Temp: CPU0 Temp: CPU1 Temp: CPU0 VRM Temp: CPU1 VRM Temp: CPU DIMM0 Temp: CPU DIMM1 Temp: Node 1 --------- Measurement ... 20 C 24 C 25 C n/a n/a 37 C 38 C -10 C 0 C 0 C n/a n/a 0 C 0 C 65 C 85 C 85 C n/a n/a 105 C 105 C Within Tolerance Within Tolerance Within Tolerance Within - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 419
the bugs fixed. • Description. Specifies a detailed description of the problem or fix. • Affected Packages. Specifies the new packages being changed. patches required by this patch. • Notes. Specifies any special instructions for the patch. NOTES This command displays all the patches currently - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 420
showpd DESCRIPTION The showpd command displays configuration information about a system's Physical Disks (PDs). SYNTAX showpd [options] [...] showpd -listcols AUTHORITY Any role in the system. OPTIONS -listcols List the columns available to be shown in the -showcols option described below ( - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 421
only shown for systems with drive chassis that are connected to four nodes. -space Shows disk capacity usage information (MB). The following columns , Failed_MB. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 422
following arguments, -tc_gt , -tc_lt , -fc_gt , -fc_lt , -devid , and -devtype are used to limit the disks that are used to create logical disks based on the characteristics of the disk drive. -tc_gt Specifies that physical disks with total chunklets greater than the number specified are - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 423
list is specified as a series of integers separated by commas (0,1,2). A list can also consist of a single integer (1). If the node list is not specified, all disks on all nodes are displayed. -slots Specifies that only disks on the slots from the slot list are displayed. The slot list - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 424
• FC - Fibre Channel • NL - Nearline • SSD - Solid State Drive • RPM - The maximum RPM speed of the physical disk. • State - State of the PD can be one of the following: ◦ normal - PD is normal ◦ degraded - The PD is not operating normally. Use showpd -s to find out the detail information. ◦ new - - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 425
• NL - Nearline • SSD - Solid State Drive • State. State of the PD can be one of the following: ◦ normal - PD is normal. ◦ degraded - The PD is not operating normally. Use showpd -s to find out the detail information. ◦ new - The PD is new, needs to be admitted before it can be used (see help - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 426
• Node_WWN. Node World Wide Name of the disk. • MFR. Physical disk manufacturer. • Model. Physical disk manufacturer's device ID. • Serial. Physical disk manufacturer's serial number. • FW_Rev. Physical disk - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 427
• Spare Chunklets. This area provides information about chunklets that are reserved for use as spares. • OK. Number of chunklets with data that is accessible to the system. • Fail. Number of failed chunklets. • Free. Number of initialized but currently unused chunklets available for use by logical - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 428
The following example displays the states of each physical disk: cli% showpd -state ID CagePos Type -State- -Detailed_State- 0 0:0:0 FC normal normal 1 0:0:1 FC normal normal 2 0:0:2 FC normal normal 3 0:0:3 FC normal normal 4 0:1:0 FC normal normal 5 0:1:1 FC normal normal 6 0:1:2 FC normal normal - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 429
The columns in the previous example are identified as follows: • ID. Physical disk ID, as assigned by the system. For unadmitted disk the ID appears as dashes (--). • CagePos. Position of PD, in the format :.: where is the cage number, is 0 or 1 depending on - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 430
The following example displays all disk in magazine 0 of cage 0 and 1: cli% showpd -p -mg 0 -cg 0,1 --Size(MB)--- ----Ports---- ID CagePos Type RPM State Total Free A B 0 0:0:0 NL 7 degraded 715008 684288 0:0:1* 1:0:1 8 1:0:0 FC 10 normal 69632 2560 0:0:2* 1:0:2 2 total 784640 686848 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 431
showpdata DESCRIPTION The showpdata command displays information about the preserved data in the system. SYNTAX showpdata [] AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS [] Requests that preserved data for a specific Logical Disk (LD) is displayed. This specifier is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 432
Specifies that information about chunklets that are synchronizing with their RAID sets is displayed. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 433
> Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen limit the disks that are used to create logical disks based on the characteristics of the disk drive. showpdch 433 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 434
-fc_gt 60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS |... (deprecated usage) Specifies the PD IDs or the PD ID pattern for disks whose chunklets are to be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 435
The columns in the previous example are identified as follows: • Pdid. The physical disk on which the chunklets reside. • Chnk. The chunklet number. • LdName. The name of the logical disk that is using the spare chunklet. • LdCh. The position of the chunklet on the logical disk. • State. The state - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 436
NOTES None. 436 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 437
, or a range of integers specified from low to high. -nd Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen (0-3). The primary path of the disks must be on the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 438
disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, beginning with 0. At least one column - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 439
Specifies the physical disk ID using an integer. This specifier is not required if -p option is used, otherwise it must be used at least once on the command line. [:] Specifies the chunklet number in a physical disk to which virtual volumes are mapped. This specifier is not required. This - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 440
the following: • showport [options] [-failed] [-sortcol [,]][ |...] AUTHORITY Any role in the system. OPTIONS -i data rate of a port and the maximum data rate that the card supports. Also shown is the type of attachment (Direct Connect or Fabric Attached) - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 441
each physical port. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning be sorted by the values in the later columns. SPECIFIERS ... Requests that information for a specified port is displayed - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 442
- FC - FC - IP RCIP1 The columns in the previous example are identified as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • Mode. Indicates whether the port is an initiator, target, or peer. Initiators connect to disks (default) and target ports connect to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 443
reset is pending. ◦ unknown. Link state is unknown. • Node_WWN. The WWN that belongs to the controller node identified in the N:S:P column. • Port_WWN/HW_Addr. The WWN that belongs to the controller node port identified in the N:S:P column. • Type. Indicates the port connection type. ◦ host. Port is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 444
08 1.02.N.5 00981760001d6187 1:2:2 3PAR FC044X 08 1.02.N.5 00981760001d6187 1:2:3 3PAR FC044X 08 1.02.N.5 00981760001d6187 1:2:4 3PAR FC044X 08 1.02.N.5 00981760001d6187 The following example displays all devices connected to ports and information about the ports settings on node 0 slot 4: cli - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 445
(ack0 or ack1) or disabled. • VCN. VLUN State Change Notification support setting. Valid values are n/a, enabled or disabled. When enabled and in public as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • State. State of the port. ◦ config_wait. Configuration - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 446
0:5:1 ready loss_sync 10 The columns in the previous example are identified as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • State. State of the port. The states are as follows: ◦ config_wait. The link configuration is waiting. ◦ alpa_wait. The link ALPA - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 447
as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • State. State of the port. ◦ ready. The port (MTU) size for the specified Remote Copy interface (default is 1500). The largest supported value is 9000 and the smallest is 100. • Rate. Data transfer rate for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 448
: FTLF8519P2BNL Serial Number : U76031S Revision : A MaxSpeed(Gbps): 2.10 Qualified : Yes TX Disable : No TX Fault : No RX Loss : No RX Power Low : No DDM Support : Yes NOTES See "RESTRICTIONS" for important information regarding port modes and port pair protection. 448 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 449
system. OPTIONS None. SPECIFIERS [::] Specifies the port for which information about devices on that port are displayed. node Specifies the node. slot Specifies the PCI bus slot in the specified node. port Specifies the Fibre Channel port number of the PCI card in the specified PCI bus slot - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 450
the specified port for information on the supplied WWN. Supplying the term this in place of a WWN indicates that the port WWN of the specified HP 3PAR storage system host port should be used. This subcommand is only for use with fabric-attached Fibre Channel ports. OPTIONS -pel Includes the SAS Phy - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 451
. The ID of the loop. • Hadr. The hard address. • Node_WWN. The WWN of the node. • Port_WWN. The WWN of the port. • ftrs. Common features that are located in PLOGI_ACC common word 1, bits 31-16. • svpm. The service parameters that are located in PRLI word 3, bits 15-0. • bbct. The buffer to buffer - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 452
NOTES The loop subcommand is functional only in a private loop topology. 452 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 453
the system. OPTIONS None. SPECIFIERS [] Specifies the port for which information about devices on that port are displayed. node Specifies the node. slot Specifies the PCI bus slot in the specified node. port Specifies the iSCSI port number of the PCI card in the specified PCI bus slot. If not - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 454
LESB counters and event alerts and are raised as necessary. All ports for the internal counters are reset. compare Specifies that internal HP 3PAR counters are checked against current LESB counters. single|both The single subcommand specifies that counters for the indicated port are displayed. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 455
is not used with the compare subcommand, then all ports are compared. The port is specified as follows: node Specifies the node. slot Specifies the PCI bus slot in the specified node. port Specifies the Fibre Channel port number of the PCI card in the specified PCI bus slot. RESTRICTIONS None - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 456
pd4 0x76 1 4 0 0 334 0 pd3 0x79 1 4 0 0 401 0 pd2 0x80 1 4 0 0 344 0 pd1 0x81 1 4 0 0 270 0 pd0 0x88 1 4 0 0 401 0 Port Loop Time since last save: 0:00:28 ID ALPA LinkFail LossSync LossSig PrimSeq InvWord InvCRC 0xef 1 19 19 0 0 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 457
or optical) to the receiver port of a Fibre Channel node. • PrimSeq. Primitive Sequence Protocol Error. There were errors during is specified, the resulting output text is greater than 80 columns wide. • Internal HP 3PAR counters are checked every 10 minutes. • Each LESB counter is a 32-bit, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 458
targets include virtual volumes with names matching any of the names or patterns specified. -sortcol [,][:[,]... Sorts command output based on column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 459
1 vvset vsb on 4000 204800 4 vvset vsc on - 102400 3 vvset vsd on 5000 102400 4 total Show active QoS rules only: cli% showqos -on I/O per second KBytes per sec Id Type Name QoS Limit Limit 1 vvset vsb on 4000 204800 4 vvset vsc on - 102400 3 vvset vsd on 5000 102400 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 460
or a specific target definition by name or by glob-style pattern. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for further information. EXAMPLES The following example displays output from the showrcopy command: # showrcopy Remote - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 461
Link Information Target Node Address Status Options System2 0 10.100.33.11 Up System2 Link InformationStatus field: • Not Started. Link is not started or is being started, such as when its node is down or Remote Copy is stopped (through the stoprcopy command). • Down. Link is down and will - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 462
Group Information Name Target Status bart bf_mirror Started PDT 2006 , Period 30m LocalVV ID RemoteVV bart-tp-ws 9 bart-ws Role Primary Mode Options Periodic Last-Sync Tue Jul 18 14:12:59 ID SyncStatus 3924 Synced LastSyncTime Tue Jul 18 14:13:09 PDT 2006 Name Target Status Role - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 463
a name, information for all links, groups, or targets is displayed. • To limit the performance impact of Remote Copy on the rest of the HP 3PAR storage system, the number of volumes that are concurrently synchronizing is limited to 20 volumes. This limit is not user-configurable and applies to the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 464
- 172.101.6.87 new rcip The columns in the previous example are identified as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • Peer_Address. IP address of the Remote Copy storage server port connected to this Remote Copy port. • Address. IP address of the Remote - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 465
as follows: • N:S:P. The physical position of the port, in the syntax node:slot:port. • State. Remote copy end-to-end transport state. Can (MTU) size for the specified Remote Copy interface (default is 1500). The largest supported value is 9000 and the smallest is 100. • Rate. Actual bit rate of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 466
The columns in the previous example are identified as follows: • N:S:P. The physical position of the port, in the format node:slot:port. • Remote_Node_WWN. World Wide name of the node to which the port indicated in the N:S:P column connects. • Remote_Port_WWN. World Wide name of the target port to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 467
and only information related to rights will be displayed. EXAMPLES The following example displays the role names in the system: cli% showrole ---Role--browse edit service super The following example displays the rights assigned to the browse role: cli% showrole ---Role--browse edit - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 468
NOTES To avoid cluttering the output, the show commands rights are not included in the output of the showrole because show commands are granted to all roles by default. 468 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 469
showrsv DESCRIPTION The showrsv command displays SCSI reservation and registration information for Virtual Volume Logical Unit Numbers (VLUNs) bound for a specified port. SYNTAX showrsv [options ] [] AUTHORITY Any role in the system. OPTIONS -l Specifies that either SCSI - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 470
• 5. (Write exclusive-registrants only). All read requests allowed. Write requests allowed for registered initiators only. • 6. (Exclusive access-registrants only). Read and write requests allowed for registered initiators only. • 7. (Write exclusive-all registrants). All read requests allowed. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 471
system. SYNTAX showsched [options][|] AUTHORITY Super, Service, Edit, Browse Any extended role in the system. OPTIONS be displayed. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, beginning - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 472
move_back_chunklet4 moverelocpd -f 3,10 17 2 * * 3 3parsvc active Y 2009-03-18 02:17:00 PDT move_back_chunklet5 moverelocpd -f 4,11 17 2 * * 4 3parsvc active Y 2009-03-12 02:17:00 PDT move_back_chunklet6 moverelocpd -f 5,12 17 2 * * 5 3parsvc active Y 2009-03-13 02:17:00 PDT - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 473
showsnmpmgr DESCRIPTION The showsnmpmgr command displays a list of registered SNMP managers for receiving traps. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX showsnmpmgr AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 474
showsnmppw DESCRIPTION The showsnmppw command displays the SNMP community string passwords. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX showsnmppw [options] AUTHORITY Any role in the system. OPTIONS -rw|-r|-w Specifies that the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 475
not provided or the information for just the local user with the name when it is provided. The output for users with a Browse or Service role is limited to the user's own accounts. If the is provided, it must be the user's name. SNMP users are created using the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 476
RAID-1, and 128 KB for RAID-5. For RAID-6, the default is a function of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine (mag). This option has no meaning for RAID-0. -ch first|last Specifies the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 477
, or a range of integers specified from low to high. -nd Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen (0-7). The primary path of the disks must be on the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 478
60 -fc_lt 230 -nd 2 specifies all the disks that have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS None. RESTRICTIONS The -cpg and -hist options cannot be used with any other option. EXAMPLES The following example displays - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 479
showspare DESCRIPTION The showspare command displays information about chunklets in the system that are reserved for spares and previously free chunklets selected for spares by the system. SYNTAX showspare [-used] AUTHORITY Any role in the system. OPTIONS -used Show only used spare chunklets. By - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 480
◦ normal. The chunklet is available for use. ◦ normal,smag. A servicemag operation is performed on the disks. ◦ none. Chunklets were not used by any logical disk. • Usage. Shows whether the spare chunklet is in use by a logical disk. ◦ available. The chunklet is available for use as a spare or as a - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 481
showsshkey DESCRIPTION The showsshkey command will displays all SSH public keys that have been set with setsshkey. SYNTAX showsshkey AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example shows the SSH public keys that have been set by the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 482
showsys DESCRIPTION The showsys command displays the HP 3PAR storage system properties includes system name, model, serial number, and system capacity None. RESTRICTIONS None. EXAMPLES The following example displays information about an HP 3PAR storage system: cli% showsys MB 482 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 483
model type of the HP 3PAR storage system. • Serial. The system serial number. • Nodes. The number of nodes in the system. • Master. The master node ID. • TotalCap. )--------- Total Capacity : 1063424 Allocated : 208384 Volumes : 103937 Base Volumes : 4266 User : 4266 Copy : 0 Admin : - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 484
Node ID : 1 Secondary Node ID : 0 State : OK LED : Green Speed : Normal --------System Descriptors-------- Location : Owner : Contact : Comment : The following example shows system parameters (-param option) for a HP 3PAR (most likely because of problems with the admin volume), - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 485
defaults. When (from default settings) is displayed, system parameters cannot be updated. • The system capacity information may have some overlaps among Volumes, System, Failed Capacities. • If the VVRetentionTimeMax is 0, then the volume retention time in the system is disabled. showsys 485 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 486
showsysmgr DESCRIPTION The showsysmgr displays startup state information about the system manager. SYNTAX showsysmgr AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the startup state information about the system manager. In - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 487
can result in data loss. • If the system has experienced a power failure, any cached data is saved to the IDE partition of each node. Upon restoration of power, the saved cached data is reapplied (powerfail recovery). During powerfail recovery, if kernal panics are encountered because of hardware - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 488
or mode page. -rescan Rescan the port to find the unknown target. SPECIFIERS Indicates the World Wide Name (WWN) of the node. Indicates the World Wide Name (WWN) of a LUN exported from an unknown target. RESTRICTIONS None. EXAMPLES The following example displays information - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 489
0:5:2 50002AC00014001F 20520002AC00001F peer_volume 1:5:2 50002AC00014001F 21520002AC00001F peer_volume If unknown targets are found, information (Port, LUN_WWN, Port WWN, and State) about each target found is displayed. NOTES Some hosts might appear as unknown targets. showtarget 489 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 490
task IDs can be specified. This option cannot be used in conjunction with other options. -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition, the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 491
command). ◦ move_regions. Track region move operations (movereg command). ◦ promote_sv. Track virtual copy promotes (promotesv command). Requires an HP 3PAR Virtual Copy license. ◦ remote_copy_sync. Track Remote Copy volume group synchronizations (syncrcopy and startrcopygroup commands). Requires an - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 492
tuning operation that was previously interrupted (tunealdvv -rollback command). Requires an HP 3PAR Dynamic Optimization license. ◦ scheduled_task. Track tasks that have been executed by the system scheduler. ◦ system_task. Track tasks that are periodically run by the system. ◦ background_task - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 493
NOTES • See the HP 3PAR Command Line Interface Administrator's Manual for additional information and examples regarding task management and task management commands, as well as information about Dynamic Optimization. • By default, this command shows all - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 494
showtemplate DESCRIPTION The showtemplate command displays existing templates that can be used for Virtual Volume (VV), Logical Disk (LD), or Common Provisioning Group (CPG) creation. SYNTAX showtemplate [options] [...] AUTHORITY Any role in the system. OPTIONS -t VV|LD|CPG - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 495
showtoc DESCRIPTION The showtoc command displays the system table of contents summary that provides a summary of the system's resources. SYNTAX showtoc AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the system table of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 496
showtocgen DESCRIPTION The showtocgen command displays the table of contents generation number. SYNTAX showtocgen AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the table of contents generation number: cli% showtocgen Table - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 497
all users is displayed. RESTRICTIONS Because the output is only for local users and is further limited when the user is at the Browse or Service authority level, an LDAP user cannot see any other user account information. The showuserconn command can be used to the see the role levels of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 498
• For the second usage (-k), users who have set a public SSH key with the setsshkey command are displayed, one per line. For users with Browse or Service role levels, the output is limited to the current user. • A Domain column may be included by using the setclienv command to set listdom to 1. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 499
showuseracl DESCRIPTION The showuseracl command displays a user's access control list (ACL). SYNTAX showuseracl AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays ACL information about all system users: cli% showuseracl User - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 500
user connection. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, sorted by values in later columns. SPECIFIERS Specifies the HP 3PAR storage system process ID for the user connection. RESTRICTIONS None. - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 501
if the CLI was started with the -listdom global option or with the LISTDOM environment variable. Refer to the HP 3PAR Command Line Interface Administrator's Manual for instructions on using global options and setting environment variables. • Domain. Indicates the domain in which the user has roles - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 502
showversion DESCRIPTION The showversion command displays information about the storage server software. Use this command to determine if your system is using the latest software version. SYNTAX showversion [options] AUTHORITY Any role in the system. OPTIONS -a Show all component versions. -b Show - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 503
showvlun DESCRIPTION The showvlun command displays information about Virtual Volume Logical Unit Numbers (VLUNs) in the system, such as all active and template VLUNs. The display is divided into two sections: the upper provides information about active VLUNs and the lower provides information about - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 504
information for multiple LUNs. -nodes Requests that only VLUNs for specific nodes are displayed. The node list is specified as a separated list. -sortcol [,][:[,]...] Sorts command output based on column number . Columns are numbered from left to right, beginning - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 505
WWN of the host to which the virtual volume is exported. In the Templates section, dashes mean this column does not apply. • Port. The port (node:slot:port) on which the host to which the virtual volume is exported appears. In the Templates section, the host-sees rule contains dashes. • Type - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 506
the updatesnapspace command, and to indicate that the number is not included in the total for the column since the corresponding number for the snapshot's base VV already includes that number. 506 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 507
-r Displays raw space used by the VVs. The following columns are shown: ID, Name, Prov, Type, Adm_RawRsvd_MB, Adm_Rsvd_MB, Snp_RawRsvd_MB, Snp_Rsvd_MB, Usr_RawRsvd_MB, Usr_Rsvd_MB, Tot_RawRsvd_MB, Tot_Rsvd_MB, VSize_MB. -zone Displays mapping zone information for VVs. The following columns are shown - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 508
Sorts command output based on the column number . Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition, the direction - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 509
• -rcopygroup {}... Displays only VVs that are in Remote Copy groups that match one or more of the specified groups or patterns. Multiple groups or patterns can be repeated using a comma-separated list (for example -rcopygroup ,...). • -policy - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 510
provisioned and the Snp space is associated with a SnpCPG. ◦ tpsd. An old-style Thin Provisioned VV (created on a 2.2.4 release or earlier) where both the base VV and snapshot data are allocated from the Snp space associated with the UsrCPG. ◦ snp. Since the VV is Type vcopy (snapshot) it is the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 511
copy type of virtual volume and can be one of the following: ◦ base. Base volume (not a copy). ◦ pcopy. Physical copy (full copy). ◦ vcopy. Snapshot copy (virtual copy). ◦ peer. Remote volume admit into the local HP 3PAR storage system. • CopyOf. Displays the virtual volume from which the copy was - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 512
. Values can be RW (read and write) or RO (read only). • Mstr. The master node for the volume responsible for assigning mapping zones. • Prnt. The ID of the volume's parent in Used Used Wrn Lim Tot_Rsvd VSize 0 admin full base 0 0 0 0 0.0 -- -- 10240 10240 100.0 -- -- 10240 10240 512 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 513
provisioned and the Snp space is associated with a SnpCPG. ◦ tpsd. An old-style Thin Provisioned VV (created on a 2.2.4 release or earlier) where both the base VV and snapshot data are allocated from the Snp space associated with the UsrCPG. ◦ snp. Since the VV is Type vcopy (snapshot) it is the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 514
fully provisioned and the Snp space is associated with a SnpCPG. ◦ tpsd. An old-style Thin Provisioned VV (created on a 2.2.4 release or earlier) where both the base VV and snapshot data are allocated from the Snp space associated with the UsrCPG. ◦ -. Since the VV is Type vcopy (snapshot) it is the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 515
copy type of virtual volume and can be one of the following: ◦ base. Base volume (not a copy). ◦ pcopy. Physical copy (full copy). ◦ vcopy. Snapshot copy (virtual copy). ◦ peer. Remote volume admit into the local HP 3PAR storage system. • State. The state of the virtual volume. ◦ normal. The virtual - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 516
type of virtual volume and can be one of the following: ◦ base. Base volume (not a copy). ◦ pcopy. Physical copy (full copy). ◦ vcopy. Snapshot copy (virtual copy). ◦ peer. Remote volume admit into the local HP 3PAR storage system. • Adm_RawRsvd_MB. Raw (including RAID overhead) Adm reserved space - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 517
will scan for zeros in the incoming write data. • no_zero_detect. This indicates that the HP 3PAR storage system will not scan for zeros in the incoming write data. • no_cache. This indicates that the HP 3PAR storage system is disabled for write caching, read caching, and read ahead for the volume - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 518
• The showvv command has new properties that provide statistics on the growth and reclamation of usr, snp, and adm space within a volume. These properties can be displayed using the -showcols option. The new properties, as shown by the -listcols option are Grown_Adm_MB, Grown_Snp_MB, Grown_Snp_SD_MB - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 519
can be repeated using a comma-separated list (for example -domain ,...). -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 520
The following example shows VV space distribution for VVs belonging to VV sets with names that begin with tv: cli% showvvcpg set:tv* ----(MB)---- -New (MB)-- Name CPG Adm Snp Usr Adm Snp Usr testvv cpg0 - - 1024 0 0 0 newtestvv cpg0 - - 1024 0 0 0 2 - 0 0 2048 0 0 0 The following - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 521
showvvmap DESCRIPTION The showvvmap command displays information about how Virtual Volume (VV) regions are mapped to logical disks. SYNTAX showvvmap AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS Specifies the VV name, using up to 31 characters in length. RESTRICTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 522
NOTES None. 522 Show Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 523
SYNTAX showvvpd [option ] {}... AUTHORITY Any role in the system. OPTIONS -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. You must specify a column number. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 524
11 0:2:3 0 0 0 0 12 0:3:0 0 0 0 0 13 0:3:1 0 0 0 0 14 0:3:2 0 0 0 0 15 0:3:3 0 0 0 0 16 1:0:0 0 0 4 4 17 1:0:1 0 0 4 4 18 1:0:2 0 0 4 4 19 1:0:3 0 0 4 4 20 1:1:0 0 0 4 4 21 1:1:1 0 0 4 4 22 1:1:2 0 0 4 4 23 1:1:3 0 0 4 4 24 1:2:0 0 0 4 4 25 1:2:1 0 0 4 4 26 1:2:2 0 0 4 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 525
17 1:0:1 0 0 4 4 18 1:0:2 0 0 4 4 19 1:0:3 0 0 4 4 20 1:1:0 0 0 4 4 21 1:1:1 0 0 4 4 22 1:1:2 0 0 4 4 23 1:1:3 0 0 4 4 24 1:2:0 0 0 4 4 25 1:2:1 0 0 4 4 26 1:2:2 0 0 4 4 27 1:2:3 0 0 4 4 28 1:3:0 0 0 4 4 29 1:3:1 0 0 4 4 30 1:3:2 0 0 4 4 31 1:3:3 0 0 4 4 32 2:0:0 0 0 4 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 526
42 2:2:2 1 1 0 2 44 2:3:0 1 1 0 2 45 2:3:1 1 1 0 2 46 2:3:2 0 1 1 2 1 0:0:1 0 1 0 1 2 0:0:2 0 1 0 1 4 0:1:0 0 1 0 1 5 0:1:1 0 1 0 1 12 0:3:0 0 1 0 1 13 0:3:1 1 0 0 1 14 0:3:2 1 0 0 1 16 1:0:0 0 0 1 1 25 1:2:1 0 1 0 1 28 1:3:0 0 1 0 1 32 2:0:0 0 1 0 1 35 2:0:3 0 1 0 1 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 527
showvvset DESCRIPTION The showvvset command lists the Virtual Volume (VV) sets defined on the HP 3PAR storage system and their members. SYNTAX showvvset [options] [...] showvvset -vv [options] [...] AUTHORITY Any role in the system. OPTIONS -d Show a more - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 528
Show the sia-1 set only, with detail: cli% showvvset -d sia-1 20 sia-1 test This set has a comment ttpvv.rw test-sv bar Show VV sets containing VVs matching test*: cli% showvvset -vv test* Id Name Members 20 sia-1 test ttpvv.rw test-sv bar NOTES A Domain column may be included by using the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 529
Any role in the system OPTIONS None SPECIFIERS None EXAMPLES The following example shows the current Web Services API server status: cli% showwsapi -Service- -State- -HTTP_State- HTTP_Port -HTTPS_State- HTTPS_Port -Version- Enabled Active Enabled 8008 Disabled 8080 1.1 NOTES The version column - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 530
> AUTHORITY • Super, Service • Any role granted the node_shutdown right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS halt Specifies that the nodes are halted after shutdown. If this subcommand is not specified, the reboot or wipeid (StoreServ 7000 only) subcommand - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 531
system. It is recommended that these tasks are either allowed to finish or manually cancelled before continuing. Continuing with this REBOOT operation may cause some of these tasks to fail. Shutting down this node will impact applications running on the system displayed above Do you REALLY want to - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 532
◦ One or more admin logical disks cannot be reset, resulting in the kernel being unable to access meta data from those LDs. ◦ One or more data (user or snap) logical disks cannot be reset, causing their associated VLUNs to become inaccessible to host applications. 532 Shutdown Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 533
shutdownsys DESCRIPTION The shutdownsys command shuts down an entire system. SYNTAX shutdownsys halt|reboot AUTHORITY • Super, Service • Any role granted the sys_shutdown right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS halt Specifies that the system - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 534
will REBOOT NOW !!! NOTES • The execution of shutdownsys command can affect service. Hence, a confirmation is required before proceeding with this command. • shutdown process and after the system has fully restarted. • If the node that was running on the system manager fails or if the system manager - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 535
25 System Reporter (SR) commands sraomoves DESCRIPTION The sraomoves command shows the space that Adaptive Optimization (AO) has moved between tiers. SYNTAX sraomoves [options] AUTHORITY Any role in the system OPTIONS -btsecs Select the begin time in seconds for the report. The value can be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 536
RESTRICTIONS None EXAMPLES The following example shows space moved by AO beginning 2 hours (7200 seconds) ago: cli% sraomoves -btsecs -7200 NOTES For this command: 1 MB = 1048576 bytes. The space reported is the space that AO has requested to be moved; the actual space moved could be less (for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 537
srcpgspace DESCRIPTION The srcpgspace command displays historical space data reports for common provisioning groups (CPGs). SYNTAX srcpgspace [options] [|...] AUTHORITY Any role in the system SUBCOMMANDS OPTIONS -attime Performance is shown at a particular time interval, specified - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 538
If it is not specified then the report ends with the most recent sample. -hires Select high resolution samples (5 minute intervals) for the report. This is the default setting. -hourly Select hourly samples for the report. -daily Select daily samples for the report. -groupby [,...] - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 539
srhistld DESCRIPTION The srhistld command displays historical histogram performance data reports for logical disks. SYNTAX srhistld [options] [|...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 540
and one of the following: • DOM_NAME Domain name • LDID Logical disk ID • LD_NAME Logical disk name • CPG_NAME Common Provisioning Group name • NODE The node that owns the LD SPECIFIERS [...|...] LDs matching either the specified LD_name or glob-style pattern are included. This - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 541
RESTRICTIONS EXAMPLES The following example displays aggregate hourly histogram performance statistics for all logical disks beginning 24 hours ago: cli% srhistld -hourly -btsecs -24h NOTES For this command: KB = 1000 bytes. srhistld 541 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 542
srhistpd DESCRIPTION The srhistpd command displays historical histogram data reports for physical disks. SYNTAX srhistpd [options] [...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 543
. For -attime reports, generate a separate row for items. Each must be different and one of the following: • PDID Physical disk ID • PORT_N The node number for the primary port for the PD • PORT_S The PCI slot number for the primary port for the PD • PORT_P The port number for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 544
Limit the data to disks of the types specified. • FC - Fibre Channel • NL - Nearline • SSD - Solid State Drive SPECIFIERS [...|...] PDs with IDs that match either the specified PDID or glob-style pattern are included. This specifier can be repeated to include multiple PDIDs or - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 545
srhistport DESCRIPTION The srhistport command displays historical histogram performance data reports for ports. SYNTAX srhistport [options] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 546
or glob-style patterns. For -attime reports, generate a separate row for items. Each must be different and one of the following: • PORT_N The node number for the port • PORT_S The PCI slot number for the port • PORT_P The port number of the port • PORT_TYPE Port type • GBITPS The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 547
EXAMPLES The following example displays aggregate hourly histogram performance statistics for all ports beginning 24 hours ago: cli% srhistport -hourly -btsecs -24h NOTES For this command: KB = 1000 bytes. srhistport 547 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 548
srhistvlun DESCRIPTION The srhistvlun command displays historical histogram performance data reports for VLUNs. SYNTAX srhistvlun [options] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 549
Select high resolution samples (5 minute intervals) for the report. This is the default setting. -hourly Select hourly samples for the report. -daily Select daily samples for the report. -metric both|time|size Selects which metric to display. Metrics can be one of the following: • both - (Default) - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 550
• HOST_WWN The host WWN for the VLUN • PORT_N The node number for the VLUN port • PORT_S The PCI slot number for the VLUN port • PORT_P The port number for the VLUN port SPECIFIERS None EXAMPLES - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 551
srldspace DESCRIPTION The srldspace command displays historical space data reports for logical disks (LDs). SYNTAX srldspace [options] [|...] AUTHORITY Any role in the system SUBCOMMANDS None OPTIONS -attime Performance is shown at a particular time interval, specified by the - - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 552
RAID set size of the LD • STEP_SIZE The RAID step size of the LD • ROW_SIZE The RAID row size of the LD • OWNER The owner node for the LD -cpg [,...] Limit the data to LDs in CPGs with names that match one or more of the specified - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 553
EXAMPLES The following example displays aggregate hourly LD space information for all RAID 5 LDs with names that match either "fc*" or "ssd*" patterns beginning 24 hours ago: cli% srldspace -raid_type 5 -hourly -btsecs -24h fc* ssd* The following example displays LD space information for the most - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 554
srpdspace DESCRIPTION The srpdspace command displays historical space data reports for physical disks (PDs). SYNTAX srpdspace [options] [...] AUTHORITY Any role in the system SUBCOMMANDS None OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 555
If it is not specified then the report ends with the most recent sample. -hires Select high resolution samples (5 minute intervals) for the report. This is the default setting. -hourly Select hourly samples for the report. -daily Select daily samples for the report. -groupby [,...] - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 556
srrgiodensity DESCRIPTION The srrgiodensity command shows the distribution of IOP/s intensity for Logical Disk (LD) regions for a common provisioning group (CPG) or Adaptive Optimization (AO) configuration. For a single CPG, this can be used to see whether AO can be effectively used. For an AO - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 557
Select the step between histogram columns of the report. By default each column's IO density is 4 times the previous column, but a step of 2 or 8 can also be specified. -cpg Treat the specifier as a CPG name instead of an AO configuration name. SPECIFIERS The name of the AO - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 558
srstatcmp DESCRIPTION The srstatcmp command displays historical performance data reports for cache memory. SYNTAX srstatcmp [options] [...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 559
[,...] For -attime reports, generate a separate row for items. Each must be different and one of the following: • NODE The controller node By default, the output of the command lists cache read and write hit rates, access rates as well as rates for locked blocks - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 560
srstatcpu DESCRIPTION The srstatcpu command displays historical performance data reports for CPUs. SYNTAX srstatcpu [options] [...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 561
items. Each must be different and one of the following: • NODE The controller node • CPU The CPU within the controller node SPECIFIERS [...] Only the specified node numbers are included, where each node is a number from 0 through 7. This specifier can be repeated to display - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 562
srstatld DESCRIPTION The srstatld command displays historical performance data reports for logical disks. SYNTAX srstatld [options] [|...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 563
and one of the following: • DOM_NAME Domain name • LDID Logical disk ID • LD_NAME Logical disk name • CPG_NAME Common Provisioning Group name • NODE The node that owns the LD SPECIFIERS [...|...] LDs matching either the specified LD_name or glob-style pattern are included. This - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 564
links (internode, PCI and cache memory). SYNTAX The syntax for the srstalink command can be one of the following examples: • srstatlink [options] [...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 565
be different and one of the following: • NODE The source controller node for the link • QUEUE The XCB queue • NODE_TO The destination controller node for the link SPECIFIERS [...] Only the specified node numbers are included, where each node is a number from 0 through 7. This specifier can - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 566
srstatpd DESCRIPTION The srstatpd command displays historical performance data reports for physical disks. SYNTAX srstatpd [options] [...] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 567
>...] For -attime reports, generate a separate row for items. Each must be different and one of the following: • PDID Physical disk ID • PORT_N The node number for the primary port for the the PD • PORT_S The PCI slot number for the primary port for the the PD • PORT_P The port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 568
srstatport DESCRIPTION The srstatport command displays historical performance data reports for ports. SYNTAX srstatport [options] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 569
[,...] For -attime reports, generate a separate row for items. Each must be different and one of the following: • PORT_N The node number for the port • PORT_S The PCI slot number for the port • PORT_P The port number for the port • PORT_TYPE The type of the port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 570
srstatqos DESCRIPTION The srstatqos command displays historical performance data reports for QoS rules. SYNTAX srstatqos [options] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 571
Select high resolution samples (5 minute intervals) for the report. This is the default. -hourly Select hourly samples for the report. -daily Select daily samples for the report. -vvset [,...] Limit the data to VVSets with names that match one or more of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 572
srstatvlun DESCRIPTION The srstatvlun command displays historical performance data reports for VLUNs. SYNTAX srstatvlun [options] AUTHORITY Any role in the system OPTIONS -attime Performance is shown at a particular time interval, specified by the -etsecs option, with one row per object group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 573
Domain name • VV_NAME Virtual volume name • HOST_NAME Host name • LUN The LUN number for the VLUN • HOST_WWN The host WWN for the VLUN • PORT_N The node number for the VLUN port • PORT_S The PCI slot number for the VLUN port • PORT_P The port number for the VLUN port SPECIFIERS None EXAMPLES - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 574
srvvspace DESCRIPTION The srvvspace command displays historical space data reports for virtual volumes (VVs). SYNTAX srvvspace [options] [ - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 575
one of the following: • DOM_NAME Domain name • VVID Virtual volume ID • VV_NAME Virtual volume name • BSID Virtual volume ID of the base virtual volume • WWN Virtual volume world wide name (WWN) • SNP_CPG_NAME Snap space Common Provisioning Group name • USR_CPG_NAME User space Common Provisioning - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 576
The following example displays VV space information for the most recent daily sample aggregated by the VV name for VVs with names that match the pattern "tp*". cli% srvvspace -daily -attime -groupby vv_name tp* NOTES For this command: 1 MB = 1048576 bytes. 576 System Reporter (SR) commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 577
26 Start Commands startao DESCRIPTION The startao command starts execution of an Adaptive Optimization (AO) configuration using data region level performance data collected for the specified number of hours. SYNTAX startao [option] AUTHORITY Super, Edit Any role granted the aocfg_start - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 578
ago until 3 hours ago, allowing up to 6 hours to complete: cli% startao -btsecs -12h -etsecs -3h -maxrunh 6 prodaocfg NOTES The startao command can be run manually, but it can also be scheduled to run automatically at specific times using the createsched command. 578 Start Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 579
CIM requests. By default, the CIM server is not started until this command is issued. SYNTAX startcim AUTHORITY • Super, Service • Any role granted the cim_start right. NOTE: You need access to all domains in order to run this command. OPTIONS None. SPECIFIERS None. RESTRICTIONS Access - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 580
on a Logical Disk (LD) that has not yet been started. SYNTAX startld [option] AUTHORITY • Super, Service • Any role granted the ld_start right. NOTE: You need access to all domains in order to run this command. OPTIONS -ovrd Specifies that the LD - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 581
SYNTAX startnoderescue -node AUTHORITY Super, Service OPTIONS -node Specifies the node to be rescued. This node must be node rescue will automatically be started when a blank node disk is inserted into a node. The startnoderescue command only needs to be manually issued if the node - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 582
to all domains in order to run this command. OPTIONS None. SPECIFIERS None. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example starts Remote Copy on a system: # startrcopy NOTES • The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 583
a glob-style pattern. This specifier can be repeated to start multiple groups. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example starts Remote Copy for Group1: # startrcopygroup Group1 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 584
To start Group2, which contains 4 virtual volumes, and specify starting snapshots, with vv4 starting from a full resync: # startrcopygroup Group2 vv1:sv1 vv2:sv2 vv3:sv3 vv4:- NOTES • If a group's target has the mirror_config policy set and the group is a primary group, then this command will be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 585
the ability to execute commands with long running times. The commands run in the background. SYNTAX starttask AUTHORITY • Super, Service, Edit • Any role granted thetask_start right. OPTIONS None. SPECIFIERS Specifies the command to be run by the starttask command. RESTRICTIONS - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 586
on a Virtual Volume (VV) that has not yet been started. SYNTAX startvv [option] AUTHORITY • Super, Service • Any role granted the vv_start right. NOTE: You need access to all domains in order to run this command. OPTIONS -ovrd Specifies that the logical - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 587
Any role granted the wsapi_start right OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example starts the Web Services API server: cli% startwsapi The Web Services API server will start shortly. NOTES Access to all domains is required to run this command. By default, the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 588
iteration of the command. -idlep Specifies the percent of idle columns in the output. -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 589
this argument is used, the minimum threshold value must be specified using the argument. ◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that statistics for I/O operations in bytes are displayed. • [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 590
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 591
• Qlen. The queue length. • Util % Cur. The percentage of current use. • Util % Avg. The percentage of average use. NOTES • For this command: KB = 1000 bytes. • If no options are used, the command defaults to show reads, writes, and totals separately for all chunklets in intervals of 2 seconds. • - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 592
Volume (VV). SYNTAX statcmp [options ] AUTHORITY Any role in the system. OPTIONS -v Specifies that CMP statistics by VV instead of by node are displayed. By default, all VVs are displayed unless the -n option is specified. -n Specifies that statistics are displayed for VVs - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 593
9600 0 11 0 13 0 1 16 0 18 0 19200 0 9600 0 12 0 14 0 Press the enter key to stop... The columns in the example above are identified as follows: • Node. Node ID on the storage system. • Type. Read or Write. • Access. Number of Current and Total Read/Write I/Os. • Hits. Number of Read/Write I/Os in - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 594
0,0 0 0 100 0,1 0 0 100 0,total 0 0 100 162 412 1,0 0 1 99 1,1 0 1 99 1,total 0 1 99 158 269 Press the enter key to stop... 15:11:05 node,cpu 0,0 0,1 0,total user sys 0 0 19 7 10 4 idle intr/s ctxt/s 100 74 87 183 444 1,0 0 0 100 1,1 0 0 100 1,total 0 0 100 158 235 Press - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 595
NOTES None. statcpu 595 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 596
. The default is 2. -iter Specifies that the command execution should terminate after a user-defined of iterations. -nodes Specifies the list of nodes for which the ports are included. -slots Specifies the list of PCI slots for which the ports are - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 597
EXAMPLES The following example displays one iteration of FCoE counts: cli% statfcoe -iter 1 -counts -begin NOTES None. statfcoe 597 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 598
Looping delay in seconds . The default is 2. -iter The command stops after a user-defined of iterations. -nodes List of nodes for which the ports are included. -slots List of PCI slots for which the ports are included. -ports List of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 599
-begin Shows the values from when the system was last initiated. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays basic iSCSI statistics collection: cli% statiscsi 16:37:59 04/06/06 ----Receive---- ---Transmit---- -----Total----- port Protocol Pkts/s KBytes/s Pkts/s - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 600
Looping delay in seconds . The default is 2. -iter The command stops after a user-defined number of iterations. -nodes List of nodes for which the ports are included. -slots List of PCI slots for which the ports are included. -ports List of port - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 601
Rx Total Digest TimeOut 1:3:1 iqn.1991-05.com.microsoft:dt-ashok-xp.hq.3pardata.com 131 1.0 1.0 2.0 4.0 0.0 4.0 0.0 0.0 Total - - 1.0 1.0 2.0 4.0 0.0 4.0 0.0 0.0 Press the enter key to stop... NOTES None. statiscsisession 601 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 602
first iteration of the command. -idlep Specifies the percent of idle columns in the output. -sortcol [,][:[,]...] Sorts command output based on the column number . Columns are numbered from left to right, beginning with 0. You must specify a column number. In addition, you - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 603
this argument is used, the minimum threshold value must be specified using the argument. ◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that statistics for I/O operations in bytes are displayed. • [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 604
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 605
NOTES • For this command: KB = 1000 bytes. • If no option is specified, the command defaults to display statistics totals. • If the or specifier is used, then LDs with names matching any of the patterns are listed, otherwise all LDs are listed. These patterns are glob-style - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 606
example displays one iteration of statistics for the internode link: cli% statlink -iter 1 11:37:28 03/11/08 XCB_sent_per_second KBytes_per_second XCBSz_KB Node Q ToNode Cur Avg Max Cur Avg Max Cur Avg 0 CM 0 15134 14911 15134 61951 61038 61951 4.1 4.1 0 PCI0 0 22336 21852 22336 79831 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 607
separated by commas (1,2,3). The list can also consist of a single integer (1). If the node_list argument is not specified, all disks on all nodes are displayed. -slots Specifies that the display is limited to specified PCI slots and PDs connected to those PCI slots. The slot_list - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 608
-sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition, the direction - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 609
◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that Specifies one or more nodes. Nodes are identified by one or more integers (item). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated with a hyphen (0-7). - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 610
are used to limit the disks that are used to create logical disks based on the characteristics of the disk drive. -tc_gt Specifies that than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 611
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 612
of integers separated by commas (for example 1,2,3). The list can also consist of a single integer (for example 1). If the node list is not specified, all disks on all nodes are displayed. -slots Specifies that the display is limited to specified PCI slots and PDs connected to those PCI - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 613
iteration of the command. -idlep Specifies the percent of idle columns in the output. -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 614
this argument is used, the minimum threshold value must be specified using the argument. ◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that statistics for I/O operations in bytes are displayed. • [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 615
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 616
first iteration of the command. -idlep Specifies the percent of idle columns in the output. -sortcol [,][:[,]... Sorts command output based on column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition, the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 617
this argument is used, the minimum threshold value must be specified using the argument. • svct - specifies that statistics for service time in milliseconds are displayed. • size - specifies that statistics for I/O operations in bytes are displayed. [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 618
A Domain column may be included by using the setclienv command to set listdom to 1. The listdom option is also set to 1 if the CLI was started with the -listdom option, or if the CLI was started with the TPDLISTDOM environment variable set. Please run cli -h and setclienv -h for details of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 619
command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example shows statistics for sending links link0 and link1: # statrcopy 17:37:01 05/17/07 -Throughput(KBytes per sec)- Target Node - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 620
example provide the following information: • Target. The system name of the actual link process that is running. • Node. The node that the link is running on. • Address. The IP address of the remote node. • IPC. The mode of the Remote Copy link (r) Receive or (s) Send. • Total KBytes. The amount of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 621
statrcvv DESCRIPTION The statrcvv command displays statistics for Remote Copy volumes in a timed loop. SYNTAX statrcvv [options ] [|]... AUTHORITY Any role in the system. OPTIONS -d Specifies the interval in seconds that statistics are sampled from using an integer from - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 622
(s) or pattern(s). -sortcol [,][:[,]...] Sorts command output based on column number (). Columns are numbered from left to right, using the argument. ◦ svct - Specifies that statistics for service time in milliseconds are displayed. ◦ size - Specifies that statistics - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 623
, all virtual volumes that are configured for Remote Copy are listed. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example shows statistics for all synchronous Remote Copy volumes - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 624
Max. The maximum number of KB per second. • Svt ms Cur. The current Remote Copy service time in milliseconds. • Svt ms Avg. The average Remote Copy service time in milliseconds. • Rmt Svt ms Cur. The current service time in milliseconds to complete I/O on the Remote Copy backup system. • Rmt Svt ms - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 625
of integers separated by commas (1,2,3). The list can also consist of a single integer (1). If the node_list is not specified, all disks on all nodes are displayed. -slots Specifies that the display is limited to specified PCI slots and PDs connected to those PCI slots. The slot_list is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 626
the first iteration of the command. -idlep Includes a percent idle columns in the output. -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In addition - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 627
this argument is used, the minimum threshold value must be specified using the argument. ◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that statistics for I/O operations in bytes are displayed. • [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 628
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 629
is to stop after the indicated number of iterations using an integer from 1 through 2147483647. -sortcol [,][:[,]...] Sorts command output based on the column number (). Columns are numbered from left to right, beginning with 0. At least one column must be specified. In - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 630
this argument is used, the minimum threshold value must be specified using the argument. ◦ svct Specifies that statistics for service time in milliseconds are displayed. ◦ size Specifies that statistics for I/O operations in bytes are displayed. • [k|K]|[m|M]|[g|G] Specifies the minimum - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 631
second. • KBytes per Avg. The average number of KB per second. • Svt ms Max. The maximum service time in milliseconds. • Svt ms Cur. The current service time in milliseconds. • Svt ms Avg. The average service time in milliseconds. • IOSz KB Cur. The current I/O size in KB. • IOSz KB Avg. The average - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 632
cause the read data to appear more than seen by the hosts. Use the histvlun -vvsum command to see data for only accesses from the host. • For this command: KB = 1000 bytes. 632 Stat Commands - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 633
The stopcim command must be issued to stop the CIM server when setting the storage system to Common Criteria mode. SYNTAX stopcim [option] AUTHORITY Super, Service NOTE: You need access to all domains in order to run this command. OPTIONS -f Specifies that the operation is forced. If this option is - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 634
already be stopped. • An older version of this command provided specifiers to disable the primary or backup systems. These specifiers were deprecated in HP 3PAR OS release 2.2.3. • Unless the -stopgroups option is used, the command will fail if there are any Remote Copy groups that are started. If - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 635
interactively typing, y. Refer to the HP 3PAR Command Line Interface Administrator's Manual for information about using environment variables. stoprcopy 635 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 636
specifier is not used, the specifier must be used. RESTRICTIONS This command requires the HP 3PAR Remote Copy Software license. Contact your local service provider for more information. EXAMPLES The following example stops Remote Copy for Group1: # stoprcopygroup Group1 636 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 637
The following example stops Remote Copy Groups that start with the name testgroup: # stoprcopygroup -pat testgroup* NOTES • If a group's target has the mirror_config policy set and the group is a primary group, then this command will be mirrored to that target and the corresponding secondary group - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 638
operation. SPECIFIERS None EXAMPLES The following example shows how to stop the Web Services API server: cli% stopwsapi Are you sure you want to stop the Web Services API server? select q=quit y=yes n=no: y Web Services API server stopped successfully. The following example shows how to stop the Web - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 639
29 Sync Command 639 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 640
syncrcopy DESCRIPTION The syncrcopy command manually synchronizes Remote Copy volume groups. SYNTAX syncrcopy [options - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 641
EXAMPLES The following example specifies that Remote Copy volume group Group1 should be synchronized with it's corresponding secondary volume group: # syncrcopy Group1 Synchronization request issued for group Group1 The following example specifies that all Remote Copy volume groups that start with - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 642
30 Tune Commands tunealdvv DESCRIPTION This command is only used for non-provisioned virtual volumes. Please use the tunevv command to create a virtual volume that has its user space provisioned from a CPG. This command was deprecated in the 2.2.4 release and will be removed in a future release. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 643
of the set size. -ha port|cage|mag Specifies that the layout must support the failure of one port pair, one cage, or one drive magazine ( one or more nodes. Nodes are identified by one or more integers (). Multiple nodes are separated with a single comma (1,2,3). A range of nodes is separated - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 644
Disks must match the specified ID(s). NOTE: The following arguments are used to limit the disks that are used to create logical disks based on the characteristics of the disk drive. -tc_gt Specifies that physical disks with total chunklets greater than the number specified are selected - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 645
have greater than 60 and less than 230 free chunklets and that are connected to node 2 through their primary path. -wait If the tunealdvv command fails due requires a Dynamic Optimization license. Contact your local HP 3PAR representative for information. • This command requires sufficient - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 646
. cli% tunealdvv testvol Task 2 started. The following example shows how to use the tunealdvv command to add a disk filter specifying that the logical disks supporting virtual volume testvol must use chunklets on physical disks 20 and 31 only. cli% tunealdvv -p -dk 20,31 testvol Task 3 started. The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 647
command identifies physical disks with high service times and optionally executes load balancing. nodes and physical disks connected to those nodes. The node list is specified as a series of integers separated by commas (1,2,3). The node list can also consist of a single integer (1). If the node - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 648
, any disk whose average service time exceeds the specified threshold is considered a candidate for load balancing. RESTRICTIONS • Access to all domains is required to run this command. • This command requires a System Tuner license. Contact your local HP 3PAR representative for information. • The - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 649
option only when you have verified that no other tunepd processes are running. EXAMPLES In the following example, PDs with average service times exceeding 50 milliseconds are identified and their chunklets automatically relocated to rebalance the PDs' load. cli% tunepd -vvlayout -chstat -movech - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 650
of average service times greater than 50 milliseconds and its chunklets are relocated. NOTES • When the -movech auto or -movech manual option is been deprecated in 2.2.3 and replaced with -nodes , -slots , and -ports . • If the -nodes, -slots, -ports or -vv options - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 651
analyze and detect poor layout and disk utilization across an entire HP 3PAR storage system array. This command runs a series of low between 1 and 8. The default value is 2. -tunenodech Specify that only intra-node chunklet level rebalancing should be performed. -dr Specify that the command is a dry - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 652
None • This command requires a Dynamic Optimization license. Contact your local HP representative for information. EXAMPLES In the following example: • VVs will be re-balanced between nodes if there is an imbalance in space usage between nodes of more than 5% (nodepct value). • PD chunklets will be - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 653
complete that phase. For example, a showtask step and phase display of 1/3 4/39 indicates that tunesys is in phase 1 of 3 (inter-node), tune 4 of 39. • Only one tunesys task can be active at a time. A dry run can be performed while tunesys is active. tunesys 653 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 654
tunetpvv DESCRIPTION This command was deprecated in the 2.2.3 release and will be changed or removed in a future release. Please use the tunevv command in the future. If Virtual Volumes (VVs) were created with deprecated commands then only deprecated commands can be used to modify VVs. The tunetpvv - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 655
an existing VV name. RESTRICTIONS • This command requires an HP 3PAR Dynamic Optimization license. Contact your local HP 3PAR representative for information. • This command requires sufficient available physical space with the same owner or backup node as the space it is being copied from. EXAMPLES - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 656
tunevv DESCRIPTION The tunevv command is used to change the properties of a virtual volume that was created with either the createvv or createtpvv command by associating it with a different Common Provisioning Group. SYNTAX The tunevv command uses one of the following syntax conventions: • tunevv - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 657
This command requires a Dynamic Optimization license. Contact your HP representative for information. EXAMPLES In the following example, the tune will automatically rollback on a failure. These options do not support virtual volumes with remote copy. These options will only convert virtual - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 658
31 Update Commands updatesnapspace DESCRIPTION The updatesnapspace command starts a non-cancelable task to update the snapshot space usage accounting. The snapshot space usage displayed by showvv -snapspace is not necessarily the current usage and the TimeCalculated column will show when it was last - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 659
The following example displays the task information using -d : cli% showtask -d 2 Id Type Name Status Phase Step ----------StartTime----- FinishTime--------- 2 snapspace_accounting ss_accounting Done 0/0 0/0 Thu Sep 22 18:43:35 PDT 2005 Thu Sep 22 18:43:35 PDT 2005 Detailed status - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 660
updatevv DESCRIPTION The updatevv command updates a snapshot Virtual Volume (VV) with a new snapshot. SYNTAX updatevv [options] ... AUTHORITY Super, Edit, Browse Any role granted the vv_update right OPTIONS -ro Specifies that if the specified VV () is a read/write snapshot - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 661
NOTES • The updatevv command attempts to use the same VV IDs for new snapshots as the snapshots that they replace so that the new VV have the same World Wide Names (WWNs) as the originals (this might be important for hosts using the VV WWN to identify the VV). However, between the removal of the - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 662
arg>] ... • upgradecage [options ] -a AUTHORITY Super, Service Any role granted the cage_upgrade right NOTE: You need access to , where is the full path name of the file on the node. The default is to use the firmware that is marked current in the firmware database - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 663
RESTRICTIONS Access to all domains is required to run this command. EXAMPLES The following example displays a cage with firmware level of 4.41 upgrading to 4.42: cli% upgradecage -a Upgrading cage cage0 cpuA from rev 1.46 to revision in file /opt/tpd/fw/cage/dc2/lbod_fw.bin-2.05. Upgrading cage - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 664
upgradepd DESCRIPTION The upgradepd command upgrades the Physical Disk (PD) firmware. SYNTAX upgradepd [-f] [-skiptest] {-a | -w ... | ...} AUTHORITY Super, Service Any role granted the pd_upgrade right NOTE: You need access to all domains in order to run this command. OPTIONS -f - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 665
the following: waittask -v waittask [...] AUTHORITY Super, Service, Edit, Browse Any role granted the task_wait right OPTIONS -v < Task 1 done NOTES • See the HP 3PAR Command Line Interface Administrator's Manual for additional information and examples regarding task management - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 666
of support you are requesting: HP 3PAR storage system HP 3PAR StoreServ 7200, 7400, and 7450 Storage systems HP 3PAR StoreServ 10000 Storage systems HP 3PAR T-Class storage systems HP 3PAR F-Class storage systems Support request StoreServ 7000 Storage 3PAR or 3PAR Storage HP 3PAR documentation - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 667
, and detailed alert information HP 3PAR F-Class, T-Class, and StoreServ 10000 Storage Troubleshooting Guide Installing, configuring, and maintaining the HP 3PAR Policy HP 3PAR Policy Server Installation and Setup Guide Server HP 3PAR Policy Server Administration Guide HP 3PAR documentation 667 - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 668
3PAR StoreServ 7000 Storage Service Guide HP 3PAR StoreServ 7450 Storage Service Guide Troubleshooting 7200, 7400, and 7450 storage systems HP 3PAR StoreServ 7000 Storage Troubleshooting Guide HP 3PAR StoreServ 7450 Storage Troubleshooting Guide Maintaining the Service Processor HP 3PAR Service - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 669
followed as directed in order to achieve a functional and supported implementation based on testing at HP. HP 3PAR branding information • The server previously referred to as the "InServ" is now referred to as the "HP 3PAR StoreServ Storage system." • The operating system previously referred to as - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 670
documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when submitting your feedback. 670 Documentation feedback - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 671
, 42, 640 admin volume, 484 admithw, 44 admitpd, 46 admitrcopylink, 48 admitrcopytarget, 50 admitrcopyvv, 51 alerts removing from system, 228 service, registered SNMP software for, 473 system removing preregistered SNMP software, 244 status of, 350 status of, setting, 271 using addsnmpmgr for - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 672
setting nodes, 291 definitions, removing, 46, 164 deleting VLUNs, 256 designate site as primary or secondary, 582 disks logical chunklets, displaying information about, 400 creating, 95 creating virtual volumes in, 154 data services, starting on, 580 I/O statistics, 602 information about, displaying - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 673
data on, 59 creating, 95 creating virtual volumes in, 154 data services, starting on, 580 displaying mapping information, 358 I/O statistics, 602 information 11 N Nearline drives, 174 new users, creating, 149 nodenames, 23 nodes CPU statistics for, 594 date and time, setting, 291 EEPROM log - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 674
469 secondary site designate, 582 secondary storage server identify, 129 service times chunklet timed loops, histograms of, 180 physical disks, histograms setting the administration network interface configuration, 302 setting the system node properties, 306 setting the system NTP server, 308 setuser - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 675
of, 350 system configuration, displaying for hosts, 386 system information, 23 system manager start-up state information, 486 startup date, setting, 336 system nodes date and time, 373 shutting down, 530 system resources, summary table of, 495 system table of contents, summary of, 495 T table of - HP 3PAR StoreServ 7200 2-node | HP 3PAR Command Line Interface Reference (OS 3.1 - Page 676
TPVV), length limit, 12 time and date for system nodes, 373 setting nodes, 291 traps removing preregistered SNMP software, 244 using , 503 deleting, 256 information about, 503 of virtual volumes, creating, 151 service time, histograms of, 197 template, 503 template conflicts in, 122 voltage status
HP 3PAR Command Line Interface Reference
HP 3PAR OS 3.1.2
Abstract
This reference describes the HP 3PAR Command Line Interface (CLI) commands that are used to administer and maintain the
HP 3PAR storage system.
HP Part Number: QL226-97016
Published: June 2013