HP 3PAR StoreServ 7200 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 165

dismissrcopylink DESCRIPTION The dismissrcopylink command removes one or more links (connections) created with the admitrcopylink command to a target system. SYNTAX • Syntax for Remote Copy over IP (RCIP): dismissrcopylink ... • Syntax for Remote Copy over Fibre Channel (RCFC): dismissrcopylink ... AUTHORITY • Super, Edit • Any role that is granted the rccopylink_dismiss right. NOTE: You need access to all domains in order to run this command. OPTIONS None. SPECIFIERS The target name, as specified with the creatercopytarget command. ... Specifies the node, slot, and port of the Ethernet port on the local system and an IP address of the peer port on the target system. This specifier can be repeated. ... Specifies the node, slot, and port of the Fibre Channel port on the local system and a World Wide Name (WWN) of the peer port on the target system. This specifier can be repeated. RESTRICTIONS • This command requires an HP 3PAR Remote Copy Software license. Contact your local service provider for further information. • This command should only be used to remove sending links. • This command cannot be used to remove the last link of a target system with started groups. EXAMPLES The following example removes the link from the Ethernet port located at 2:2:2 of System 2: # dismissrcopylink System2 2:2:2:193.1.2.11 dismissrcopylink 165