HP 3PAR StoreServ 7200 2-node HP 3PAR StoreServ 7000/7450 Storage Cabling Conf - Page 31
to the, Connect
View all HP 3PAR StoreServ 7200 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Attach DP-1 Chains to Enclosures Red routing 1. Connect Node 0 (DP-1) to the I/O 0 (DP-1) on the A drive enclosure closest to the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working away from the controller. Green routing 1. Connect Node 1 (DP-1) to I/O 1 (DP-1) on the A drive enclosure farthest from the controller. 2. Connect all A drive enclosures from (DP-2) to (DP-1) working toward the controller. NOTE: The two adjacent enclosures are not directly connected. 2 Node 7 Drive Enclosures (7S) 31
Attach DP-1 Chains to Enclosures
Red routing
1.
Connect
Node 0 (DP-1)
to the
I/O 0 (DP-1)
on the
A
drive enclosure closest to the controller.
2.
Connect all
A
drive enclosures from
(DP-2) to (DP-1) working away from the controller.
Green routing
1.
Connect
Node 1 (DP-1)
to
I/O 1 (DP-1)
on the
A
drive enclosure farthest from the controller.
2.
Connect all
A
drive enclosures from
(DP-2) to (DP-1) working toward the controller.
NOTE:
The two adjacent enclosures are not directly connected.
2 Node 7 Drive Enclosures (7S)
31