HP 3PAR StoreServ 7400 2-node HP 3PAR StoreServ 7000 Storage Site Planning Man - Page 24
Used in HP M6720 and HP M6710 drive enclosures, the 764 W PCM.
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
There are two types of PCMs: • 580 W PCM - Used in HP M6720 and HP M6710 drive enclosures • 764 W PCM (includes a replaceable battery pack) - Used in controller node enclosures The following table provides the technical specifications of the replaceable battery located inside the 764 W PCM. Table 10 Battery Pack Technical Specifications Specifications Operating Temperature Operating Altitude (max) Shipping Temperature Shipping Altitude (max) Built-In Protection Capacity Design Life Shelf Life Maintenance Discharge Cycles Charge/Discharge Cycles Expiration/End of Life Replacement Description 41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude (1.8° C/1,000 m) 10,000 ft / 3,048 m 32° to 140° F (0° to 60° C) 40,000ft / 12,192 m Over-Voltage, Under-Voltage, Over-Current, Over-Temperature 49.5Wh (5.0Ah) The battery is designed for an expected operational life of 5 years. 2 years minimum Under normal operating conditions, each battery will undergo a Maintenance Discharge Cycle once every three months. System software ensures that only one battery at a time is discharged. Maintenance Discharge Cycles test the current charge capacity, and ensure the longest battery life. Minimum of 200 cycles. Expected operational life of greater than 500 cycles The Battery Pack has no calendar-based Expiration or End of Life date. End of Life is determined by reaching a minimum charge capacity. This event will be reported by the HP 3PAR software. A battery may be replaced by removing the PCM indicating a battery fault, removing and replacing the Battery from the PCM, and replacing the PCM within the enclosure. 24 Power Requirements