HP 3PAR StoreServ 7400 4-node HP 3PAR Management Console 4.3.1 User's - Page 249
The Hosts Screen Detail Pane, Connected Device, General, Host Name
View all HP 3PAR StoreServ 7400 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Group Field Description Configured Rate For RCIP ports. The configured data transfer rate. A value of 0 indicates that no data is being transferred. Rate For iSCSI ports. Data transfer rate. A value of 0 indicates that no data is being transferred. TCP Port The TCP port number used by the iSCSI card. Duplex (For RCIP) The duplex speed, Half or Full. Adapter Type For RCIP ports. Model of the adapter that contains the port (for example, Intel PRO/1000MT). Fibre Channel Topology Settings (displayed for Class FC and RCFC ports) Adaptor Type Type of connection (such as Fabric Attached). Identifies which Fibre Channel classes of service are enabled (2, 3, or 2/3). 2/3 indicates that both Class 2 and Class 3 are enabled. Model of the Fibre Channel adapter that contains the port (for example, QLOGIC 2302). Remote Node WWN The node WWN. Displayed if the port is an RCFC port. Remote Port WWN The port WWN. Displayed if the port is an RCFC port. Mode Change Indicates whether port mode change from initiator to target or vice versa is Allowed or Prohibited. This setting is configured using the CLI controlport command. Hosts The number of hosts connected to the port. This is only displayed if the port is connected to hosts. Physical Disks The number of physical disks connected to the port. This is only displayed if the port is connected to drive cages. Link State The current state of the link. Displayed if the port is an RCFC port. iSNS Settings (displayed for iSCSI ports not shown) Primary IP Address TCP Port Primary Internet Storage Name Service (iSNS) server IP address. iSNS protocol allows for automated discovery, management, and configuration of iSCSI. The port on the iSNS server with which to communicate. Clicking the highlighted value for Connected Device in the General area displays the Host Summary screen or the System screen, depending on the connected device type. The Hosts Screen Detail Pane The detail pane of the Hosts screen displays the following: Column Host ID Host Name Domain WWN Port Description The ID of the host associated with the selected port. The name of the host system. The domain the host is associated with (if any). The World Wide Name of the port. The port location in Node:Slot:Port format. Clicking the highlighted value under Host Name displays the Host Summary screen or the System screen, depending on the connected device type. Viewing Port Information 249