HP 3PAR StoreServ 7450 2-node HP 3PAR Service Processor Software User' - Page 13
Stopping and Starting System-Related Processes, Changing the SP Default Route
View all HP 3PAR StoreServ 7450 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Stopping and Starting System-Related Processes This feature allows you to stop and start the spevent and spcollect processes for a particular system. It may be useful as a diagnostic to stop and then start the system-related processes if you are having problems with the SP communicating with the system. Unlike in maintenance mode, the stopping of system-related processes does not attempt to limit or accept events that can occur while system-related processes are stopped. When the processes are restarted manually or as a result of restarting the SP, all pending events are transferred to HP 3PAR Central or an HP 3PAR Authorized Service Provider. To stop or start system-related processes by using SPOCC: 1. On the SPOCC home page, click the SPmaint tab. 2. Click SP Control/Status. 3. Click Stop InServ related SP Processes or Start InServ related SP Processes, and then click OK when prompted. To stop or start system-related processes by using SPMAINT: 1. From the SPMAINT main menu, type 1 for SP Control/Status, and then press ENTER. 2. Type 4 for Stop InServ related Processes or 5 for Start InServ related Processes, and then press ENTER. 3. Select the system to stop or start related processes, and then press ENTER. 4. When prompted, confirm the stopping of system-related processes. Changing the SP Default Route Changing the Service Processor (SP) default route affects the network setting for handling routing decisions to destinations not local to the Service Processor. The SP default route is the communication link to a proxy host or the outside world. Typically, the same host is designated as the gateway (see "Changing the Service Processor Default Gateway" (page 14)). To change the SP default route by using SPOCC: 1. On the SPOCC home page, click the SPmaint tab. 2. Click Network Configuration. 3. Click Change Public Network Interface Parameters. 4. Enter a new default route in the Default Route field, and then click Save and Activate. To change the SP default route by using SPMAINT: 1. From the SPMAINT main menu, type 2 for Network Configuration, and then press ENTER. 2. Type 4 for Change public network interface parameters, and then press ENTER. 3. Type 2 for Change Default Route, and then press ENTER. 4. Type a new default route, and then press ENTER. 5. The SP Network submenu appears; the new default route appears to the right of the current default route. Type A, and then press ENTER to quit, save, and activate the new default route. Changing the SP IP Address To change the Service Processor's IP address by using SPOCC: 1. On the SPOCC home page, click the SPmaint tab. 2. Click Network Configuration. 3. Click Change Public Network Interface Parameters. 4. Enter a new IP address in the IP Address field, and then click Save and Activate. To change the Service Processor's IP address by using SPMAINT, select the following menu options from the SPMAINT main menu: 1. From the SPMAINT main menu, type 2 for Network Configuration, and then press ENTER. Stopping and Starting System-Related Processes 13