HP 3PAR StoreServ 7450 4-node HP 3PAR StoreServ 7450 Storage Site Planning Man - Page 15
Storage System Rack Shipping Containers, Systems Acceptance Certificate
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
• Verify the electrical service wiring has been installed at the predetermined location before installing the storage system. Refer to the respective product specifications for detailed requirements. • Verify any additional support equipment is properly installed and operational. Prior to installation, review the packaging to make sure the goods have not been tampered with. When unpacking the equipment, verify the delivered shipment of all the equipment is correct. Refer to the packing slip and the SKUs with the shipment. Complete the installation checklist. See "Storage System Installation Checklist" (page 37). Also, prepare the following checkpoints with your local Sales Representative or Systems Engineer: • Contact information for customer personnel and for HP technical sales, support, and service personnel • Implementation project plan • Configuration information for the storage system to be installed, including system configuration diagrams • Shipping and delivery details and requirements • Management workstation, SP, and network information • Description of the environment • Volume and RAID level planning information • Additional notes and comments about installation • Current support matrix • System technical specifications • Systems Acceptance Certificate Storage System Rack Shipping Containers A separate shipping container holds each storage system rack. The drive and node enclosure shipping containers hold a maximum of 24 drives. Examine the delivered package for obvious damage or signs of tampering and notify both HP and the carrier of any issues. Shipping container measurements are as follows: • Rack crate container: 85.35 x 50.87 x 35.43 inch (216.80 x 129.20 x 90 cm) Approximate shipping weight: 1606 lb (728 kg) • Drive enclosure container: Height 13 inch (33.1 cm) x Width 11 inch (28 cm) x Depth 27 inch (68.6 cm) Approximate shipping weight: 33.8 lb (15.4 kg) • Disk drive magazine container: Height 38 inch (96.5 cm) x Width 29 inch (73.6 cm) x Depth 34 inch (86.4 cm) Approximate shipping weight: 392 lb (177.8 kg) • Node enclosure container: Height 30 inch (76.2 cm) x Width 35 inch (88.9 cm) x Depth 45 inch (114.3 cm) Approximate shipping weight: 618 lb (280.3 kg) When the equipment arrives, you must make sure that there is enough room to unload and unpack the storage system. The specific amount of space you will need to unpack the storage system is based on the dimensions of the container, the ramp, and the room required to access the storage system so that it can be moved to its placement destination. Storage System Rack Shipping Containers 15