HP 3PAR StoreServ 7450 4-node HP 3PAR StoreServ Storage Concepts Guide (OS 3.1 - Page 67
Port Numbering, HP 3PAR StoreServ 7000 Controller Node Numbering
View all HP 3PAR StoreServ 7450 4-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Table 9 System Models and Number of Controller Nodes Storage System Model StoreServ 7000 StoreServ 10000 T400 T800 F200 F400 Number of Controller Nodes 2 or 4 2, 4, 6, or 8 2 or 4 2, 4, 6, or 8 2 4 Port Numbering The number of host ports each storage system model can accommodate is summarized in Table 10 (page 67). Table 10 Storage System Models and Number of Ports Storage System Model StoreServ 7200 StoreServ 7400 StoreServ 7450 StoreServ 10000 T400 T800 F200 F400 Number of FC Ports 0-12 0-12 (2 node); 0-24 (4 node) 4-12 (2 node); 8-24 (4 node) 0-288 0-64 0-128 0-8 0-16 Number of iSCSI Ports 0-4 (10 Gb/s) 0-8 (10 Gb/s) 0-4 (2 node); 0-8 (4 node) (10 Gb/s) 0-18 0-16 0-32 0-8 (1 Gb/s) 0-16 (1 Gb/s) NOTE: • For information about port location and numbering, see "Port Location Formats" (page 28). • For information about how to view the control cache DIMM and data cache DIMM configurations for each controller node, see the HP 3PAR Command Line Interface Administrator's Manual and HP 3PAR Management Console Online Help. For information about memory expansion, contact your HP representative. • For a complete list of supported third-party hardware and software, go to the Single Point of Connectivity Knowledge (SPOCK) website http://www.hp.com/storage/spock. HP 3PAR StoreServ 7000 Controller Node Numbering The HP 3PAR StoreServ 7000 Storage system can contain two or four controller nodes per system configuration. Controller nodes are located in the rear of the node enclosure. The HP 3PAR StoreServ 7200 Storage system includes two nodes, which are numbered 0 and 1 from bottom to top. The HP 3PAR StoreServ 7400 Storage system can include two nodes or four nodes. Four-node systems are numbered from 0 to 3 from bottom to top. Controller Nodes 67