HP 4000/6000/8000 HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Conn - Page 5
Required patches, Switch support, Multiple-path support, Single-path support
View all HP 4000/6000/8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Table 2 Supported platforms Solaris platform Sun Fire Model numbers V120 V210 V240 V440 V490 V890 280R V480 V880 V1280 4800 4810 6800 12K 15K E2900 E4900 E6900 Enterprise HP x86 ProLiant (Solaris 10 only) E220R E420R E250 E450 E3000 E3500 E4000 E4500 E5000 E5500 E6000 E6500 E10000 BL25p BL35p DL385 DL585 V20z V40z Required patches This release was tested with the current Sun Solaris patches installed. The latest patch information is available on the Sun web site: http://sunsolve.sun.com/pub-cgi/show.pl?target=tous CAUTION: You must install the required patches. Your system will not function properly without them. Switch support This release supports the Fibre Channel (FC) switches and firmware versions listed in the HP StorageWorks SAN design reference guide, which you can download from the HP StorageWorks web site: http://h18004.www1.hp.com/products/storageworks/san/documentation.html NOTE: HP recommends that you not mix switch firmware versions in a SAN. It is a best practice to uniformly upgrade all switches in the SAN. Multiple-path support A Sun Solaris system with EVA4000/6000/8000 storage requires the installation of either Sun Solaris MPxIO or VERITAS VxVM/DMP multipathing software on each host to achieve high-availability, multipath capability. Sun Solaris MPxIO and VERITAS VxVM/DMP multipathing software require two FC adapters (FCAs) connected to both controllers. Single-path support Solaris servers require VERITAS Volume Manager to support single-path mode. NOTE: Do not use single-path mode in mission-critical environments. 4000/6000/8000 Enterprise Virtual Array connectivity 5.1B for Sun Solaris release notes 5