HP 4000/6000/8000 HP StorageWorks 4000/6000/8000 Enterprise Virtual Array Conn - Page 4

Prerequisites, EVA compatibility, Switch support, Failover/failback

Page 4 highlights

• Support for EVA4000/6000/8000 controller software 5.110. • Support for the 4-GB backend loop switch, part number 30-10022-01. Prerequisites Required patches This release was tested with the current Sun Solaris patches installed. The latest patch information is available on the Sun web site: http://sunsolve.sun.com/pub-cgi/show.pl?target=tous CAUTION: You must install the required patches. Your system may not function properly without them. Multiple-path support A Sun Solaris system with EVA4000/6000/8000 storage requires the installation of either Sun Solaris MPxIO or VERITAS VxVM/DMP multipathing software on each host to achieve high-availability, multipath capability. Sun Solaris MPxIO and VERITAS VxVM/DMP multipathing software requires two Fibre Channel adapters (FCAs) connected to both controllers. Single-path support Solaris servers require VERITAS Volume Manager to support single-path mode. NOTE: Do not use single-path mode in mission-critical environments. Compatibility/Interoperability EVA compatibility Some component versions may change due to revision. For the latest information, see the HP storage web site: http://h18006.www1.hp.com/storage/index.html Switch support This release supports the Fibre Channel (FC) switches and firmware versions listed in the HP StorageWorks SAN design reference guide, which you can download from the HP StorageWorks web site: http://h18004.www1.hp.com/products/storageworks/san/documentation.html NOTE: HP recommends that you not mix switch firmware versions in a SAN. It is a best practice to uniformly upgrade all switches in the SAN. Failover/failback Failback preference settings for the HSV controllers are specific to the operating system. For operating system failback information, see the HP StorageWorks 4000/6000/8000 Enterprise Virtual Array user guide. 4

  • 1
  • 2
  • 3
  • 4
  • 5

Support for EVA4000/6000/8000 controller software 5.110.
Support for the 4-GB backend loop switch, part number 30-10022-01.
Prerequisites
Required patches
This release was tested with the current Sun Solaris patches installed. The latest
patch information is available on the Sun web site:
h
t
t
p
:
/
/
s
u
n
s
o
l
v
e
.
s
u
n
.
c
o
m
/
p
u
b
-
c
g
i
/
s
h
o
w
.
p
l
?
t
a
r
g
e
t
=
t
o
u
s
CAUTION:
You must install the required patches. Your system may not function properly without them.
Multiple-path support
A Sun Solaris system with EVA4000/6000/8000 storage requires the installation of either Sun Solaris
MPxIO or VERITAS VxVM/DMP multipathing software on each host to achieve high-availability, multipath
capability.
Sun Solaris MPxIO and VERITAS VxVM/DMP multipathing software requires two Fibre Channel adapters
(FCAs) connected to both controllers.
Single-path support
Solaris servers require VERITAS Volume Manager to support single-path mode.
NOTE:
Do not use single-path mode in mission-critical environments.
Compatibility/Interoperability
EVA compatibility
Some component versions may change due to revision. For the latest information, see the HP storage
web site:
h
t
t
p
:
/
/
h
1
8
0
0
6
.
w
w
w
1
.
h
p
.
c
o
m
/
s
t
o
r
a
g
e
/
i
n
d
e
x
.
h
t
m
l
Switch support
This release supports the Fibre Channel (FC) switches and firmware versions listed in the
HP StorageWorks
SAN design reference guide
, which you can download from the HP StorageWorks web site:
h
t
t
p
:
/
/
h
1
8
0
0
4
.
w
w
w
1
.
h
p
.
c
o
m
/
p
r
o
d
u
c
t
s
/
s
t
o
r
a
g
e
w
o
r
k
s
/
s
a
n
/
d
o
c
u
m
e
n
t
a
t
i
o
n
.
h
t
m
l
NOTE:
HP recommends that you
not
mix switch firmware versions in a SAN. It is a best practice to uniformly
upgrade all switches in the SAN.
Failover/failback
Failback preference settings for the HSV controllers are specific to the operating system. For operating
system failback information, see the
HP StorageWorks 4000/6000/8000 Enterprise Virtual Array
user guide.
4