HP 4400 HP B-series Fabric OS 6.3.2d Release Notes (5697-1105, July 2011) - Page 53
Solution, Closed defect summary, SW MIB counters such as Link Error State Block, Port Level Perform
View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Closed defect summary Solution A switch with busy management applications may run into a race condition when more than one RPC connection gets established simultaneously. This may cause multiple connections to free a shared object twice and trigger an rpcd panic. Fixed in Fabric OS 6.3.2c. Access Gateway trace data lacks enough information for path loss de- Fixed in Fabric OS 6.3.2c. bugging. SW MIB counters such as Link Error State Block, Port Level Performance/Error, and other similar objects are available through the CLI but Fixed in Fabric OS 6.3.2c. not through SNMP. After a device performs a LOGO, followed by port offline and online events, the switch route is not properly re-established, and the host cannot discover targets. Fixed in Fabric OS 6.3.2c. Due to an incorrect internal counter logic, PORT-1003 port faults are erroneously being reported in the RASLOG. Fixed in Fabric OS 6.3.2c. After configuring the SCC Policy only on an edge switch, then removing the front domains of the FCR from the SCC followed by disabling/enabling the edge switch, the F_Ports get disabled with the following message: 2010/08/20-16:19:45, [SEC-1187], 1433, FID 128, INFO, T5300_161, Security violation: Unauthor- ized switch 20:00:00:05:1e:0a:54:ca tries to join fabric. Fixed in Fabric OS 6.3.2c. There is currently no functionality to disable the IPv6 interface when duplicate addresses are detected. Fixed in Fabric OS 6.3.2c. Customers may experience false fan related errors on the HP 2408 24- Fixed in Fabric OS 6.3.2c. 10GbE w/8-8Gb FC Base FCoE Switch. SNMP shows MIB connUnitPortEntries only for ports that have SFPs in- Fixed in Fabric OS 6.3.2c. stalled. Kernel panic encountered while accessing compact flash. Fixed in Fabric OS 6.3.2c. Pv6 named Certificate Signing Request (CSR) files may not be FTP'd to some Windows based ftp server because of the presence of "." in the Fixed in Fabric OS 6.3.2c. filename. Customers may observe a temporary laser fault with SFPs, or other I2c Fixed in Fabric OS 6.3.2c. access retries during heavy load. After replacing a drive on an FL_Port, the initiator cannot discover the device. The newly replaced device on the Loop port does not register with name server properly. Fixed in Fabric OS 6.3.2c. When BE credit is lost, customers need to reseat the blade to recover. Fixed in Fabric OS 6.3.2c. seccertutil genkey reports "Configure a Valid IPv4 or IPv6 address" when there already is a valid IPv6 address. Fixed in Fabric OS 6.3.2c. The severity for the RASLOG AN-1003 error is raised from WARNING to ERROR in order to provide an easy interface for customers to trap it through SNMP. Customers who do not want to see this RAS log should leave Bottleneck Detection disabled. Fixed in Fabric OS 6.3.2c. HP B-series Fabric OS 6.3.2d Release Notes 53