HP 4700 HP Color LaserJet 4700 Printer Series - Certificate of Volatility - Page 1

Model: HP LJ4700 HP LJ4700n HP LJ4700dn HP LJ4700dtn HP LJ4700ph+ Hewlett-Packard Certificate of Volatility Part Number: Address: Hewlett-Packard Company Q7491A 11311 Chinden Blvd Q7492A Boise, ID 83714 Q7493A Q7494A Q7695A Volatile Memory Does the device contain volatile memory (Memory whose contents are lost when power is removed)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: SDRAM DDR 128 MB n print job specific information, and turn unit off, power unit back on 256 MB information stored in RAM disk dn, dtn 512 MB ph+ Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: SDRAM 32 MB Pageframe video memory N/A Type (SRAM, DRAM, etc): Size: Function: Steps to clear memory: Non-Volatile Memory Does the device contain non-volatile memory (Memory whose contents are retained when power is removed)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: Compact Flash 32 MB Printer Firmware. Perform a cold reset as explained in the service manual. Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: EEPROM (NVRAM) 64K Formatter PCA: page count, Perform a cold reset as explained in configuration, PCA options, etc the service manual. Type (Flash, EEPROM, etc): Size: Function: Steps to clear memory: . . Mass Storage Does the device contain mass storage memory (Hard Disk Drive, Tape Backup)? Yes No If Yes please describe the type, size, function, and steps to clear the memory below Type (HDD, Tape, etc): Size: Function: Steps to clear memory: Embedded HDD (ph+ bundle 40GB Job, font, forms storage 1. Turn the printer on. only) 2. As the printer performs its power- on sequence, press and hold the Menu button until all three lights on the control panel are lit. 3. Press the Reverse Arrow button. The message INITIALIZE DISK displays on the control panel. 4. Press the Down Arrow button. The printer initializes the hard disk and continues its power-on sequence. Type (HDD, Tape, etc): Size: Function: Steps to clear memory: HDD optional all others 40GB Job, font, forms storage 1. Turn the printer on. 2. As the printer performs its power- on sequence, press and hold the Menu button until all three lights on the control panel are lit. 3. Press the Reverse Arrow button. The message INITIALIZE DISK displays on the control panel. 4. Press the Down Arrow button. The printer initializes the hard disk and continues its power-on sequence.