HP 4710s Memory Modules - Windows Vista
HP 4710s - ProBook - Core 2 Duo 2.53 GHz Manual
 |
UPC - 884962172070
View all HP 4710s manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 4710s manual content summary:
- HP 4710s | Memory Modules - Windows Vista - Page 1
Memory Modules User Guide - HP 4710s | Memory Modules - Windows Vista - Page 2
Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional - HP 4710s | Memory Modules - Windows Vista - Page 3
Table of contents Adding or replacing memory modules Index ...10 iii - HP 4710s | Memory Modules - Windows Vista - Page 4
iv - HP 4710s | Memory Modules - Windows Vista - Page 5
to the vacant expansion memory module slot or by upgrading the existing memory module in the primary memory module slot. WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power cord and remove all batteries before installing a memory module. CAUTION: Electrostatic - HP 4710s | Memory Modules - Windows Vista - Page 6
7. Remove the screws from the battery area. Your computer has either 2 or 3 screws that need to be removed. NOTE: Refer to the illustration that most closely matches your computer. 2 Adding or replacing memory modules - HP 4710s | Memory Modules - Windows Vista - Page 7
8. Turn the computer display-side up, and then remove the 2 screws from the back edge of the computer. 9. Open the computer as far as possible. 10. Slide the switch cover straight back towards the display, and then remove the switch cover. 3 - HP 4710s | Memory Modules - Windows Vista - Page 8
display assembly, and then turn the keyboard upside down (2) to expose the memory compartment. 13. If you are replacing a memory module, remove the existing memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the - HP 4710s | Memory Modules - Windows Vista - Page 9
module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. 14. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the - HP 4710s | Memory Modules - Windows Vista - Page 10
c. Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. 15. Turn over the keyboard (1) into the keyboard tray, and then slide the keyboard into place (2). 6 Adding or replacing memory modules - HP 4710s | Memory Modules - Windows Vista - Page 11
16. Replace the screws on the keyboard. Your computer has either 2 or 3 screws that need to be replaced. NOTE: Refer to the illustration that most closely matches your computer. 17. Slide the switch cover into place. 18. Close the computer display. 7 - HP 4710s | Memory Modules - Windows Vista - Page 12
19. Replace the 2 screws on the back edge of the computer. 8 Adding or replacing memory modules - HP 4710s | Memory Modules - Windows Vista - Page 13
replaced. NOTE: Refer to the illustration that most closely matches your computer. 21. Turn the computer upside down on a flat surface, and then replace the battery. 22. Reconnect external power and external devices. 23. Turn on the computer. 9 - HP 4710s | Memory Modules - Windows Vista - Page 14
Index K keyboard removing 4 M memory module removing 4 memory modules, replacing 1 S switch cover removing 3 10 Index - HP 4710s | Memory Modules - Windows Vista - Page 15
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
 |
 |
Memory Modules
User Guide