HP 500B Hardware Reference Guide - Compaq 500B/505B - Page 42
need to be placed in the same position., The replacement power supply will
View all HP 500B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6 Before removing the power supply carefully note its orientation in the computer. IMPORTANT: The replacement power supply will need to be placed in the same position. 7 Place the computer on its side. IMPORTANT: Noting the location, type and orientation of the power connectors is extremely important! Failure to correctly restore all power connectors appropriately will prevent the computer or components from working successfully. NOTE: The location of the power connectors on the motherboard may vary from the ones shown below. 9 Trace the power supply cables to the system components: z Optical disc drives (A) z Hard disk drives (B) z Motherboard main power (C) z Motherboard fan (D). 8 Locate the power supply at the top of the computer. 10 Disconnect the power cable from the optical disc and hard disk drives by squeezing the latch (1) on the connectors and pulling to remove. 42 Removing and Replacing a Power Supply