HP 600 HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo
HP 600 Manual
 |
View all HP 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 600 manual content summary:
- HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 1
HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWorks 600 Modular Disk System Configuration Guide Part Number 633935-001 October 2010 (First Edition) - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 3
Contents Before you begin ...4 Overview ...4 Cabling guidelines for MDS600 ...4 Cabling ...5 Unsupported Smart Array Controller cabling configurations 5 Supported Smart Array Controller cabling configurations 7 Connecting two Smart Array P212 controllers to one MDS600 7 Connecting one Smart Array - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 4
instructions for directly connecting one or two HP ProLiant DL/ML/SL servers with Smart Array P212, P411, and P812 Controllers into the HP StorageWorks 600 Modular Disk System. Cabling guidelines for MDS600 Observe the following guidelines: • No cables ship with the MDS600. The only supported - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 5
for Smart Array Controller cabling is an unsupported configuration. NOTE: Only one SAS port connection on each Primary I/O module is a supported configuration. It is recommended to connect cables to SAS port 1 connectors. NOTE: Cascading, directly connecting a cable from one Primary I/O module - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 6
either of the Secondary I/O module drawers for Smart Array Controller cabling is an unsupported configuration. Only one SAS port connection on each Primary I/O module is a supported configuration. It is recommended to connect cables to SAS port 1 connectors. No cables ship with the MDS600. The only - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 7
from a HP ProLiant DL/ML/SL server with two Smart Array P212 Controllers to the SAS port 1 connectors on the MDS600 Primary I/O modules. Connect SAS cables from the server to SAS port 1 connectors on the MDS600 Primary I/O modules. No cables ship with the MDS600. The only supported cable length - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 8
Controller to one MDS600 This example illustrates direct connections from a HP ProLiant DL/ML/SL server with one Smart Array P411 Controller Primary I/O modules. No cables ship with the MDS600. The only supported cable length that can be used is the 2.00m (6.56 ft.) mini-SAS cable. 8x wide - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 9
Controller to MDS600 This example illustrates direct connections from a HP ProLiant DL/ML/SL server with one Smart Array P812 SAS cables. NOTE: The Smart Array P812 Controller with firmware 3.50 or greater supports the MDS600 with firmware 2.66 or greater. NOTE: Maximum configuration for the Smart - HP 600 | HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 10
and P411 Controllers to an MDS600 This example illustrates direct connections from two HP ProLiant DL/ML/SL servers with one Smart Array P212 and one can be utilized. No cables ship with the MDS600. The only supported cable length that can be used is the 2.00m (6.56 ft.) mini-SAS cable. 8x wide
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
HP ProLiant DL/ML/SL Server Cabling
configurations for the HP StorageWorks 600
Modular Disk System
Configuration Guide
Part Number 633935-001
October 2010 (First Edition)