HP 600 HP ProLiant DL/ML/SL Server Cabling configurations for the HP StorageWo - Page 6
ft. mini-SAS cable., 8x wide SAS cables are not supported.
 |
View all HP 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Item Description 6 SAS port 2 connector Using either of the Secondary I/O module drawers for Smart Array Controller cabling is an unsupported configuration. Only one SAS port connection on each Primary I/O module is a supported configuration. It is recommended to connect cables to SAS port 1 connectors. No cables ship with the MDS600. The only supported cable length that can be used is the 2.00m (6.56 ft.) mini-SAS cable. 8x wide SAS cables are not supported. Always be sure that the servers attached to the MDS600 are powered down before connecting SAS cables. Cabling 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
Cabling 6
Item
Description
6
SAS port 2 connector
Using either of the Secondary I/O module drawers for Smart Array Controller cabling is an unsupported
configuration.
Only one SAS port connection on each Primary I/O module is a supported configuration. It is
recommended to connect cables to SAS port 1 connectors.
No cables ship with the MDS600. The only supported cable length that can be used is the 2.00m (6.56
ft.) mini-SAS cable.
8x wide SAS cables are not supported.
Always be sure that the servers attached to the MDS600 are powered down before connecting SAS
cables.