HP 6125XLG R2306-HP 6125XLG Blade Switch ACL and QoS Command Reference - Page 51
remark customer-vlan-id, remark dot1p, Related commands, Syntax, Default, Views, Predefined user roles
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
[Sysname-behavior-database] redirect interface ten-gigabitethernet1/1/5 Related commands • classifier behavior • qos policy • traffic behavior remark customer-vlan-id Use remark customer-vlan-id to add a CVLAN marking action to a traffic behavior. Use undo remark customer-vlan-id to remove the action from the traffic behavior. Syntax remark customer-vlan-id vlan-id undo remark customer-vlan-id Default No CVLAN marking action is configured. Views Traffic behavior view Predefined user roles network-admin Parameters vlan-id: Specifies a CVLAN ID in the range of 1 to 4094. Examples # Configure traffic behavior b1 to mark matching packets with CVLAN 111. system-view [Sysname] traffic behavior b1 [Sysname-behavior-b1] remark customer-vlan-id 111 remark dot1p Use remark dot1p to configure an 802.1p priority marking action or an inner-to-outer tag priority copying action. Use undo remark dot1p to delete the action. Syntax remark { [ green | red | yellow ] dot1p dot1p-value | dot1p customer-dot1p-trust } undo remark [ green | red | yellow ] dot1p Default No 802.1p priority marking action or inner-to-outer tag priority copying action is configured. Views Traffic behavior view 46