HP 6510b External Devices - Windows Vista
HP 6510b - Compaq Business Notebook Manual
View all HP 6510b manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 6510b manual content summary:
- HP 6510b | External Devices - Windows Vista - Page 1
External Devices User Guide - HP 6510b | External Devices - Windows Vista - Page 2
© Copyright 2007 Hewlett-Packard Development Company, L.P. Windows is a U.S. registered trademark of Microsoft Corporation. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements - HP 6510b | External Devices - Windows Vista - Page 3
Product notice This user guide describes features that are common to most models. Some features may not be available on your computer. ENWW iii - HP 6510b | External Devices - Windows Vista - Page 4
iv Product notice ENWW - HP 6510b | External Devices - Windows Vista - Page 5
Table of contents 1 Using a USB device Connecting a USB device ...2 Stopping a USB device ...2 USB legacy support ...2 2 Using a 1394 device (select models only) Connecting a 1394 device ...5 Stopping a 1394 device ...5 3 Using the docking connector (select models only) Index ...7 ENWW v - HP 6510b | External Devices - Windows Vista - Page 6
vi ENWW - HP 6510b | External Devices - Windows Vista - Page 7
drive, printer, scanner, or hub. Devices can be connected to the computer or an optional docking device. Some USB devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the manufacturer's instructions - HP 6510b | External Devices - Windows Vista - Page 8
at the factory. To disable or enable USB legacy support: 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select System Configuration > Device - HP 6510b | External Devices - Windows Vista - Page 9
keys to enable or disable USB legacy support, and then press f10. 4. To save your preferences and exit Computer Setup, use the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences go into effect when the computer restarts. ENWW USB legacy - HP 6510b | External Devices - Windows Vista - Page 10
device to the computer. Scanners, digital cameras, and digital camcorders often require a 1394 connection. Some 1394 devices may require additional support software, which is usually included with the device. For more information about device-specific software, refer to the user guide for the device - HP 6510b | External Devices - Windows Vista - Page 11
To prevent damage to a 1394 port connector, use minimal force to connect a 1394 device. To connect a 1394 device to the computer, connect the 1394 cable for the of the device in the list. NOTE: If the device is not displayed, you do not have to stop the device before you remove it. 3. Click Stop, - HP 6510b | External Devices - Windows Vista - Page 12
3 Using the docking connector (select models only) The docking connector connects the computer to an optional docking device. An optional docking device provides additional ports and connectors that can be used with the computer. 6 Chapter 3 Using the docking connector (select models only) ENWW - HP 6510b | External Devices - Windows Vista - Page 13
, connecting 5 1394 devices connecting 5 description 4 stopping 5 1394 port 4 C cables 1394 5 USB 2 D docking connector 6 H hubs 1 P ports 1394 4 USB 1 U USB cable, connecting 2 USB devices connecting 2 description 1 stopping 2 USB hubs 1 USB legacy support 2 USB ports, identifying 1 ENWW Index 7 - HP 6510b | External Devices - Windows Vista - Page 14
External Devices
User Guide