HP 6535b HP Compaq 6530b Notebook PC and HP Compaq 6535b Notebook PC - Mainten - Page 96
Remove the TouchPad board
UPC - 884420171874
View all HP 6535b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Remove the TouchPad board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the six Phillips PM2.0×3.0 screws that secure the TouchPad bracket to the top cover. CAUTION: When removing the TouchPad bracket, be sure that the fingerprint reader board cable (1) is removed through the opening in the TouchPad bracket. Failure to follow this caution may result in damage to the fingerprint reader board cable. NOTE: The fingerprint reader board cable is present only on computer models equipped with a fingerprint reader. 3. Release the TouchPad bracket (2) by sliding it forward until the bracket clears the spring clips (3) built into the top cover. 4. Remove the TouchPad bracket (4). 5. Release the TouchPad board (1) by sliding it forward until the board clears the spring clips (2) built into the top cover. 86 Chapter 4 Removal and replacement procedures