HP 6730s HP Compaq 6730s and 6735s Notebook PC - Maintenance and Service Guide - Page 105
Restore defaults, Save changes and exit
UPC - 884420345459
View all HP 6730s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
To return all settings in Computer Setup to the values that were set at the factory, follow these steps: 1. Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup Menu" message is displayed at the bottom of the screen. 2. Press f10 to enter BIOS Setup. 3. Use a pointing device or the arrow keys to select File > Restore defaults. 4. Follow the on-screen instructions. 5. To save your changes and exit, click the Save icon in the lower-left corner of the screen, and then follow the on-screen instructions. - or - Use the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. NOTE: Your password settings and security settings are not changed when you restore the factory settings. Using Computer Setup 97