HP 70 HP StorageWorks 70 Modular Smart Array Enclosure User Guide (434893-003, - Page 18
Installing the enclosure into the rack, Secure the front end of the rails to the rack.
View all HP 70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the enclosure into the rack To install the enclosure into a rack: 1. Secure the front end of the rails to the rack. IMPORTANT: Do not remove the pins from the ends of the rack rails unless you are converting the rails for use in round-hole racks. These load-bearing pins are designed to fit through the holes without being removed. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal. 2. Secure the back end of the rails to the rack. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. 18 Installing the enclosure