HP 7660 HP Photosmart 7600 series - (English) Setup Guide - Page 1

hp photosmart 7600 series setup guide 1 unpack your printer Note: Purchase a USB cable separately. See the HP Photosmart Basics Guide for a description of the items included with your printer. Windows PC: Do not connect the printer to your computer with the USB cable until prompted by the installation software. Macintosh: Do not connect the printer to your computer with the USB cable until the software installation has finished. 2 plug in the power cord HP #57 HP #58 3 load plain paper in the in tray 1. Lift the paper catch. 2. Pull out the paper length guide on the In tray and slide the paper width guide as far to the left as it will go. 3. Place a stack of plain paper in the In tray. Paper catch 4. Adjust the paper width guide and paper length guide to fit close to the edges of the paper without bending the paper. 5. Lower the paper catch. 6. Make sure that the photo tray slider is pulled forward (toward you). This disengages the photo tray. Paper width guide Note: Store photo paper in the resealable storage bag provided. In tray *Q3010-90153* Q3010-90153 Photo tray slider Paper length guide 4 select your language 1. Press the ON button to turn on the printer. 2. When Select Language? appears on the printer's LCD screen, press the OK button. 3. Press the MENUorbutton to highlight your language. Press the OK button to select your language, then press the OK button again to confirm. 4. When Select Country/Region? appears on the printer's LCD screen, press the OK button. 5. Press the MENUorbutton until the desired country or region appears on the printer's LCD screen. Press the OK button to select your country or region. On button Menu button OK button