HP 8/20q HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Enterprise Fabr - Page 134
Configuring ports
View all HP 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Configuring ports Use the drop-down lists in the Port Properties dialog box to change the following parameters: • Port symbolic name • Port types • Port states • Port speeds • I/O StreamGuard • Device scan The port settings or characteristics are configured using the Port Properties dialog box (Figure 80). To open the Port Properties dialog box, select one or more ports, open the Port menu, and then select Port Properties. Figure 80 Port Properties dialog box Use the Select to Propagate Changes to Entire Column options to propagate the same change to all selected ports. Select these options before making a change to a port. The Port Properties dialog box fields are described in Table 31. Table 31 Port Properties dialog box fields State Port Symbolic Name Operational State Configured State Operational Speed Configured Speed Running Type Configured Type Description Current port name User-defined name for a port Port state that is currently active. This value may be different from the administrative port state, for example, due to an error condition. Port state (Online, Offline, Diagnostics, or Down) saved in the switch configuration, either by the user or at the factory. This value is persistent; it is maintained during a switch reset, and is used after a reset to set the port operational state. Port speed that is currently active Port speed saved in the switch configuration Port type that is currently active Port type saved in the switch configuration. To change, click in the field, and select an option from the drop-down list. 134 Managing Ports